---
title: "How To Perform a Model Recovery"
output: rmarkdown::html_vignette
bibliography: REFERENCES.bib
vignette: >
  %\VignetteIndexEntry{How To Perform a Model Recovery}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r, echo = FALSE, message=FALSE}
knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)
library(dRiftDM)
set.seed(1014)
```


In this vignette, we demonstrate how to perform a model recovery analysis. Model recovery is an important component of model validation, particularly when we are interested in quantitatively comparing models. The goal is to test whether different models can be distinguished from one another based on the data they generate, ensuring that the models are identifiable within a given model space. If, for example, model A can also provide a good fit to data generated under models B or C, this suggests that model A may be overly flexible. Such flexibility can limit the generalizability of the model and make it difficult to disentangle the competing models on a quantitative level.

A simple way to perform a model recovery analysis is to generate synthetic data under each model and then fit each model to each data set. To assess model recovery, we can track which model provides the best fit to each data set, using a fit statistic that penalizes model complexity [@Vandekerckhove2015book], and summarize the results in a contingency table---also known as a confusion matrix [see @WilsonCollins2019].

Here, we provide demonstration code comparing the Ratcliff DDM with a simplified version of the Diffusion Model for Conflict Tasks (DMC), using a combination of \verb|simulate_data()| and \verb|estimate_dm()|. As a fit statistic, we use the Bayesian Information Criterion (BIC), although the same logic applies to other fit indices that similarly balance goodness of fit and model complexity [see, e.g., @Vandekerckhove2015book].

First, we define each model and specify the parameter spaces used to generate the synthetic data. Note that we need to slightly customize the Ratcliff model (see \href{https://bucky2177.github.io/dRiftDM/articles/customize_ddms.html#defining-new-conditions}{here}) so that it includes the same two conditions as the DMC model (i.e., \texttt{comp} and \texttt{incomp}).


```{r}
# 1.1) create the Ratcliff model and set new conditions
ratcliff_model <- ratcliff_dm()
conds(ratcliff_model) <- c("comp", "incomp")

# allow the drift rate to vary
instructions <- "muc ~ "

ratcliff_model <- modify_flex_prms(
  object = ratcliff_model,
  instr = instructions
)
print(ratcliff_model)



# 1.2) now create DMC (without trial-by-trial variability in the starting point
# and non-decision time; matching with the Ratcliff model)
dmc_model <- dmc_dm(var_non_dec = FALSE, var_start = FALSE)


# 1.3) create the parameter space for generating synthetic data
lower_dmc <- c(muc = 2, b = 0.3, non_dec = 0.2, tau = 0.02, A = 0.02)
upper_dmc <- c(muc = 6, b = 0.8, non_dec = 0.4, tau = 0.15, A = 0.20)

lower_ratcliff <- c(muc = 2, b = 0.3, non_dec = 0.2)
upper_ratcliff <- c(muc = 6, b = 0.8, non_dec = 0.4)
```
Note that the Ratcliff model in this demo comprises four parameters, whereas the DMC model comprises five parameters.
```{r}
coef(ratcliff_model)
coef(dmc_model)
```
In a second step, we then generate data under both models. For each model, we simulated `200` trials per condition and 10 data sets. Critically, the small number of 10 data sets was chosen to ensure that this vignette runs relatively fast! In practice, this number has to be considerably higher! (e.g., `>=100`). Also, the `200` trials were chosen rather arbitrary. In practice, choose the number of trials in accordance with the typical trial numbers in your field and/or data sets! Finally, note that we initially simulated more data under the Ratcliff model and then chose 10 data sets with `muc` in `incomp` conditions being slightly smaller than in `comp` condition. This ensures that the data simulated under the Ratcliff model produces a reasonable congruency effect.
```{r}
set.seed(1)
# Data generated under the Ratcliff model
data_ratcliff <- simulate_data(
  ratcliff_model, #  the model
  n = 200, # choose this value reasonably
  k = 100, # more data to filter afterwards
  lower = lower_ratcliff, # the lower parameter space for simulation
  upper = upper_ratcliff # the upper parameter space for simulation
)
# choose data were the drift rate in incompatible conditions is
# reasonably larger than in compatible conditions
prms_ratcliff <- data_ratcliff$prms
diffs <- prms_ratcliff$muc.comp - prms_ratcliff$muc.incomp
filter <- which(diffs < 1.5 & diffs > 0.1)
ids <- prms_ratcliff$ID[filter[1:10]]
data_ratcliff <- data_ratcliff$synth_data # extract the data.frame of raw RTs
data_ratcliff <- data_ratcliff[data_ratcliff$ID %in% ids, ]


# Data generated under the DMC model
data_dmc <- simulate_data(
  dmc_model, #  the model
  n = 200, # choose this value reasonably
  k = 10, # in practice, simulate more data sets!
  lower = lower_dmc, # the lower parameter space for simulation
  upper = upper_dmc # the upper parameter space for simulation
)
data_dmc <- data_dmc$synth_data # extract the data.frame of raw RTs
```
To assess whether the simulated data are reasonably comparable across conditions, we compute summary statistics of the mean RTs:
```{r}
calc_stats(data_ratcliff, type = "basic_stats", level = "group")
calc_stats(data_dmc, type = "basic_stats", level = "group")
```
In the third step, we fit each model to each data set. For parameter estimation, we use Differential Evolution with two virtual cores and the default parameter ranges that dRiftDM provides for each model out of the box.

```{r, eval = FALSE}
# get the parameter ranges for optimization
# (adapt this if you have a custom model)
l_u_ratcliff <- get_lower_upper(ratcliff_model)
l_u_dmc <- get_lower_upper(dmc_model)


# Fit the Ratcliff model to its data
fits_r_r <- estimate_dm(
  drift_dm_obj = ratcliff_model,
  obs_data = data_ratcliff,
  optimizer = "DEoptim",
  lower = l_u_ratcliff$lower,
  upper = l_u_ratcliff$upper,
  n_cores = 1, # you might want to increase this
  verbose = 0,
  progress = 0,
  messaging = 0 # suppresses all status infos
)

# Fit the Ratcliff model to DMC's data
fits_r_d <- estimate_dm(
  drift_dm_obj = ratcliff_model,
  obs_data = data_dmc,
  optimizer = "DEoptim",
  lower = l_u_ratcliff$lower,
  upper = l_u_ratcliff$upper,
  n_cores = 1, # you might want to increase this
  verbose = 0,
  progress = 0,
  messaging = 0 # suppresses all status infos
)

# Fit the DMC model to its data
fits_d_d <- estimate_dm(
  drift_dm_obj = dmc_model,
  obs_data = data_dmc,
  optimizer = "DEoptim",
  lower = l_u_dmc$lower,
  upper = l_u_dmc$upper,
  n_cores = 1, # you might want to increase this
  verbose = 0,
  progress = 0,
  messaging = 0 # suppresses all status infos
)

# Fit the DMC model to the Ratcliff model's data
fits_d_r <- estimate_dm(
  drift_dm_obj = dmc_model,
  obs_data = data_ratcliff,
  optimizer = "DEoptim",
  lower = l_u_dmc$lower,
  upper = l_u_dmc$upper,
  n_cores = 1, # you might want to increase this
  verbose = 0,
  progress = 0,
  messaging = 0 # suppresses all status infos
)
```
In the fourth step, we determine, for each data set, which model provides the better fit using the BIC fit statistic.
```{r, eval = FALSE}
# Ratcliff model -> Ratcliff data
stats_r_r <- BIC(fits_r_r, type = "fit_stats")
# DMC model -> Ratcliff data
stats_d_r <- BIC(fits_d_r, type = "fit_stats")
# Ratcliff model -> DMC data
stats_r_d <- BIC(fits_r_d, type = "fit_stats")
# DMC model -> DMC data
stats_d_d <- BIC(fits_d_d, type = "fit_stats")

# ensure the order of fits matches
stopifnot(stats_r_r$ID == stats_d_r$ID)
stopifnot(stats_r_d$ID == stats_d_d$ID)

# now count how often for each data set a model
winner_ratcliff_data <- ifelse(stats_r_r$BIC < stats_d_r$BIC, 1, 2)
winner_ratcliff_data <- factor(winner_ratcliff_data, levels = c(1, 2))
winner_dmc_data <- ifelse(stats_r_d$BIC < stats_d_d$BIC, 1, 2)
winner_dmc_data <- factor(winner_dmc_data, levels = c(1, 2))
```
Finally, we create a contingency table that quantifies the ``probability'' that a given model fits a data set best, conditional on which model generated the data (i.e., $p(\text{fit model} \mid \text{sim model})$).
```{r, eval = FALSE}
# convert to proportions
table_ratcliff <- prop.table(table(winner_ratcliff_data))
table_dmc <- prop.table(table(winner_dmc_data))

# assemble matrix
mat <- rbind(table_ratcliff, table_dmc)
rownames(mat) <- c("sim_r", "sim_d")
colnames(mat) <- c("fit_r", "fit_d")
```

```{r, echo = FALSE, eval = FALSE}
use_directory("inst")
saveRDS(
  object = mat,
  file = file.path("inst", "model_recovery_vignette_mat.rds")
)
```

```{r, echo = FALSE}
sys_path <- system.file(package = "dRiftDM")
mat <- readRDS(
  file = file.path(sys_path, "model_recovery_vignette_mat.rds")
)
```

```{r}
mat
```


The resulting matrix shows that for data simulated under the Ratcliff model, the Ratcliff model provided the best fit in all cases. For data simulated under the DMC model, DMC provided the best fit in 80% of the cases. Thus, in our small toy example, we demonstrate that the classical Ratcliff DDM and the DMC model can be distinguished. This is important because it shows that the non-stationary diffusion models implemented in dRiftDM can be empirically discriminated from simpler, stationary diffusion models.^[Note that we also ran the same simulation using a higher number of data sets. The results were very similar. The present conclusion of discriminability is thus not merely due to a small number of simulated data.]

We can go even a step further and convert the confusion matrix into an *inversion matrix* [see @WilsonCollins2019]. Whereas the confusion matrix quantifies $p(\text{fit model} \mid \text{sim model})$, the inversion matrix quantifies $p(\text{sim model} \mid \text{fit model})$—that is, the probability that data best fit by a given model were actually generated by another model. Assuming equal prior probabilities across models, the inversion matrix can be obtained simply by re-normalizing the confusion matrix across columns.
```{r}
inversion_mat <- apply(mat, 2, function(col) col / sum(col))
inversion_mat
```
An important note at the end of this small model recovery example: Model recovery depends strongly on the settings used to simulate and fit the synthetic data. If, for example, the simulated parameters are restricted to a narrow region in which the models under comparison behave similarly, the resulting data may not vary enough to meaningfully distinguish the models. Moreover, if the optimization routine is not well-calibrated or if the simulated data do not reflect the characteristics of the empirical data to which the models will later be applied, the conclusions drawn from the recovery analysis may not generalize to the actual model-fitting context. Thus, it is important to stress that a model recovery should be designed to closely mirror the conditions under which the models will ultimately be fitted to empirical data.

