The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

Overview

Introduction

This vignette introduces and gives an overview of the COINr package. COINr is a high-level R package which is the first fully-flexible development and analysis environment for composite indicators and scoreboards.

This vignette is one of quite a few vignettes which document the package. Here, the aim is to give a quick introduction and overview of the package. The other vignettes deal with specific operations.

As of COINr v1.0.0 some radical changes have been introduced. Most notably for existing users, is the change in syntax. This is an unfortunate one-off necessity and the changes (and how to survive them, or roll back to the old version of COINr) are described in an extra vignette called Changes in v1.0.

Installation

COINr is on CRAN and can be installed by running:

install.packages("COINr")

Or simply browsing for the package in R Studio. The CRAN version will be updated every 1-2 months or so. If you want the very latest version in the meantime (I am usually adding features and fixing bugs as I find them), you can install the development version from GitHub. First, install the ‘remotes’ package if you don’t already have it, then run:

remotes::install_github("bluefoxr/COINr")

This should directly install the package from Github, without any other steps. You may be asked to update packages. This might not be strictly necessary, so you can also try skipping this step if you prefer.

Once the package is installed, it can be loaded as follows:

library(COINr)

Features

The main features of the COINr package are those for building the composite indicator by performing operations on the data, those for analysing/post-processing, and those for visualisation. Here, the main functions are briefly listed (this list is not exhaustive):

Building functions begin with a capital letter, except for new_coin() which is used to initialise a coin object

Function Description
new_coin() Initialise a coin object given indicator data and metadata
Screen() Screen units based on data availability rules
Denominate() Denominate/scale indicators by other indicators
Impute() Impute missing data
Treat() Treat outliers and skewed distributions
qTreat() Simplified-syntax version of Treat()
Normalise() Normalise indicators onto a common scale
qNormalise() Simplified-syntax version of Normalise()
Aggregate() Aggregate indicators using weighted mean

Building functions are defined as those that modify the data (by creating an additional data set). They also keep a record of their arguments inside the coin, which allows coins to be regenerated. See Adjustments and Comparisons.

Analysing functions include those multivariate analysis, weight optimisation and sensitivity analysis, as well as those for reporting results:

Function Description
get_corr() Get correlations between any indicator/aggregate sets
get_corr_flags() Find high or low-correlated indicators within groups
get_cronbach() Get Cronbach’s alpha for any set of indicators
get_data() Get subsets of indicator data
get_data_avail() Get data availability details of each unit
get_denom_corr() Get high correlations between indicators and denominators
get_eff_weights() Get effective weights at index level
get_opt_weights() Get optimised weights
get_results() Get conveniently-arranged results tables
get_sensitivity() Perform a global uncertainty or sensitivity analysis
get_stats() Get a table of indicator statistics
get_str_weak() Highest and lowest-ranking indicators for a given unit
get_unit_summary() Summary of scores and ranks for a given unit
remove_elements() Test the effect of removing indicators or aggregates

Plotting functions generate plots using the ggplot2 package:

Function Description
plot_bar() Bar chart of a single indicator or aggregate
plot_corr() Heat maps of correlations between indicators/aggregates
plot_dist() Statistical plots of indicator/aggregate distributions
plot_dot() Dot plot of an indictaor/aggregate with unit highlighting
plot_framework() Sunburst or linear plot of indicator framework
plot_scatter() Scatter plot between two indicators/aggregates
plot_sensitivity() Plots of sensitivity indices
plot_uncertainty() Plots of confidence intervals on unit ranks

Adjustment and comparison functions allow copies, adjustments and comparisons to be made between alternative versions of the composite indicator:

Function Description
Regen() Regenerate results of a coin object
change_ind() Add and remove indicators
compare_coins() Exports all data frames in the COINr object to an Excel workbook
compare_coins_multi() Convert a COINr class object to a COIN class object, for use in the ‘COINr’ package

Other functions are useful tools that don’t fit into the other categories

Function Description
import_coin_tool() Import data and metadata from the COIN Tool
COIN_to_coin() Convert an older “COIN” class object to a newer “coin” class object
build_example_coin() Build the example coin using built-in example data
build_example_purse() Build the example purse using built-in example data
export_to_excel() Export contents of the coin to Excel

All functions are fully documented and individual function help can be accessed in the usual way by ?function_name.

The COINr package is loosely object oriented, in the sense that the composite indicator is encapsulated in an S3 class object called a “coin”, and a time-indexed collection of coins is called a “purse” (see Building coins) Most of the main functions listed in the previous tables take this “coin” class as the main input (and often also as the output) with other function arguments specifying how to apply the function. E.g. the syntax is typically:

coin <- COINr_function(coin, function_arguments)

Many of the main COINr functions are generics: they have methods also for data frames, purses, and in some cases numeric vectors. This means that COINr functions can also be used for ad-hoc operations without needing to build coins.

Quick example

The COINr package contains some example data which is used in most of the vignettes to demonstrate the functions, and this comes from the ASEM Sustainable Connectivity Portal. It is a data set of 49 indicators covering 51 Asian and European countries, measuring “sustainable connectivity”. Here we work through building a composite indicator, and link to the other vignettes for more details.

Before proceeding, let’s clearly define a few terms first to avoid confusion later on.

We begin by building a new “coin”. To build a coin you need two data frames which are inputs to the new_coin() function. See the vignette on Building coins for more details on this.

ASEM <- new_coin(ASEM_iData, ASEM_iMeta, level_names = c("Indicator", "Pillar", "Sub-index", "Index"))
#> iData checked and OK.
#> iMeta checked and OK.
#> Written data set to .$Data$Raw

The output of new_coin() is a coin class object with a single data set called “Raw”:

ASEM
#> --------------
#> A coin with...
#> --------------
#> Input:
#>   Units: 51 (AUS, AUT, BEL, ...)
#>   Indicators: 49 (Goods, Services, FDI, ...)
#>   Denominators: 4 (Area, Energy, GDP, ...)
#>   Groups: 4 (GDP_group, GDPpc_group, Pop_group, ...)
#> 
#> Structure:
#>   Level 1 Indicator: 49 indicators (FDI, ForPort, Goods, ...) 
#>   Level 2 Pillar: 8 groups (ConEcFin, Instit, P2P, ...) 
#>   Level 3 Sub-index: 2 groups (Conn, Sust) 
#>   Level 4 Index: 1 groups (Index) 
#> 
#> Data sets:
#>   Raw (51 units)

Let’s view the structure of the index that we have specified, using the plot_framework() function:

plot_framework(ASEM)

See the Visualisation vignette for the full range of plotting options in COINr.

At the moment the coin contains only our raw data. To build the composite indicator we need to perform operations on the coin. All of these operations are optional and can be performed in any order. We begin by denominating the raw data: that is, we divide some of the indicators by other quantities to make our indicators comparable between small and large countries. See the vignette on Denomination.

ASEM <- Denominate(ASEM, dset = "Raw")
#> Written data set to .$Data$Denominated

The only thing we specify here is that the denomination should be performed on the “Raw” data set. The other specifications for how to denominate the indicators were already contained in the data frames that we input to new_coin(). Running Denominate() has created a new data set called “Denominated” which is reported in the message when we run the function (we can choose another name if we wish). This is additional to the “Raw” data set and does not overwrite it.

Next we will screen units (countries) based on data availability. We want to ensure that every unit (country) has at least 90% data availability across all indicators. Screening is done by the Screen() function:

ASEM <- Screen(ASEM, dset = "Denominated", dat_thresh = 0.9, unit_screen = "byNA")
#> Written data set to .$Data$Screened

The details of this function can be found in the Unit screening vignette. Again, by running this function we have created a new data set. Let’s look again at the contents of the coin using its print() method:

ASEM
#> --------------
#> A coin with...
#> --------------
#> Input:
#>   Units: 51 (AUS, AUT, BEL, ...)
#>   Indicators: 49 (Goods, Services, FDI, ...)
#>   Denominators: 4 (Area, Energy, GDP, ...)
#>   Groups: 4 (GDP_group, GDPpc_group, Pop_group, ...)
#> 
#> Structure:
#>   Level 1 Indicator: 49 indicators (FDI, ForPort, Goods, ...) 
#>   Level 2 Pillar: 8 groups (ConEcFin, Instit, P2P, ...) 
#>   Level 3 Sub-index: 2 groups (Conn, Sust) 
#>   Level 4 Index: 1 groups (Index) 
#> 
#> Data sets:
#>   Raw (51 units)
#>   Denominated (51 units)
#>   Screened (46 units)

Notice that the “Screened” data set now has 46 units because five have been screened out, having less than 90% data availability.

Next we will impute any remaining missing data points. This can be done in a variety of ways, but here we choose to impute using the group mean, i.e. if a country is in the “Asia” group, we replace missing points by the Asian mean. If a country is in the “Europe” group, we replace with the European mean.

ASEM <- Impute(ASEM, dset = "Screened", f_i = "i_mean_grp", use_group = "EurAsia_group")
#> Written data set to .$Data$Imputed

This writes another data set called “Imputed”, which has filled in all the missing data points. Again, we have to specify which data set to impute, and we have chosen the “Screened” data set. Full details of the imputation function can be found in the Imputation vignette.

We would next like to treat any outliers. The Treat() function gives a number of options, but by default will identify outliers using skewness and kurtosis thresholds, then Winsorise or log-transform indicators until they are brought within the specified thresholds. This function is slightly complicated and full details can be found in the Outlier treatment vignette.

ASEM <- Treat(ASEM, dset = "Screened")
#> Written data set to .$Data$Treated

The details of the data treatment can be found inside the coin. A simplified version of Treat() is also available, called qTreat(), which may be easier to use in many cases.

The final step before aggregating is to bring the indicators onto a common scale by normalising them. The Normalise() function will, by default, scale each indicator onto the \([0, 100]\) interval using a “min-max” approach.

ASEM <- Normalise(ASEM, dset = "Treated")
#> Written data set to .$Data$Normalised

Again, because Normalise() is a slightly complex function (unless it is run at defaults, as above), a simplified version called qNormalise() is also available. Details on normalisation can be found in the Normalisation vignette.

To conclude the construction of the composite indicator, we must aggregate the normalised indicators up within their aggregation groups. In our example, indicators (level 1) are aggregated into “pillars” (level 2), which are themselves aggregated up into “sub-indexes” (level 3), which are finally aggregated into a single index (level 4). The Aggregate() function will aggregate following the structure which was specified in the iMeta argument to new_coin(). By default, this is done using the arithmetic mean, and using weights which were also specified in iMeta.

ASEM <- Aggregate(ASEM, dset = "Normalised", f_ag = "a_amean")
#> Written data set to .$Data$Aggregated

Details on aggregation can be found in the Aggregation vignette.

We now have a fully-constructed coin with index scores for each country. How do we look at the results? One way is the get_results() function which extracts a conveniently-arranged table of results:

# get results table
df_results <- get_results(ASEM, dset = "Aggregated", tab_type = "Aggs")

head(df_results)
#>   uCode Rank Index  Conn  Sust Physical ConEcFin Political Instit   P2P Environ
#> 1   CHE    1 68.33 62.18 74.48    64.37    33.30     73.03  83.32 56.87   78.13
#> 2   DNK    2 64.47 56.05 72.90    50.17    30.52     76.98  71.59 51.01   70.53
#> 3   NLD    3 64.46 61.32 67.60    68.15    45.11     83.49  67.96 41.86   57.14
#> 4   NOR    4 64.23 56.53 71.93    57.45    25.39     78.95  87.10 33.75   71.55
#> 5   BEL    5 63.11 63.02 63.19    71.80    48.65     79.57  71.84 43.27   52.00
#> 6   SWE    6 62.82 52.88 72.77    51.90    23.93     80.10  70.04 38.43   68.34
#>   Social SusEcFin
#> 1  87.63    57.67
#> 2  86.17    61.99
#> 3  86.00    59.65
#> 4  87.04    57.20
#> 5  85.36    52.22
#> 6  86.92    63.04

This shows at a glance the top-ranking countries and their scores. See the Presenting Results vignette for more ways to generate results tables.

We can also generate a bar chart:

plot_bar(ASEM, dset = "Aggregated", iCode = "Index", stack_children = TRUE)

This also shows the underlying sub-index scores.

We will not explore all functions here. As a final useful step, we can export the entire contents of the coin to Excel if needed:

# export coin to Excel
export_to_excel(coin, fname = "example_coin_results.xlsx")

Finally

The preceding example covered a number of features of COINr. Features that were not mentioned can be found in the following vignettes:

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.