The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

amapGeocode

Total downloads badge CRAN status Lifecycle: maturing License: MIT DOI Codecov test coverage R-CMD-check

中文版介绍: 博客 or 知乎

Introduction

Geocoding and Reverse Geocoding Services are widely used to provide data about coordinate and location information, including longitude, latitude, formatted location name, administrative region with different levels. There are some packages can provide geocode service such as tidygeocoder, baidumap and baidugeo. However, some of them do not always provide precise information in China, and some of them are unavailable with the upgrade backend API.

amapGeocode is built to provide high precise geocoding and reverse geocoding service, and it provides an interface for the AutoNavi(高德) Maps API geocoding services. API docs can be found here and here. Here are two main functions to use, one is getCoord() which needs a character location name as an input, while the other one is getLocation() which needs two numeric longitude and latitude values as inputs.

The getCoord() function extracts coordinate information from input character location name and outputs the results as data.table, XML or JSON (as list). And the getLocation() function extracts location information from input numeric longitude and latitude values and outputs the results as data.table, XML or JSON (as list). With the data.table format as output, it’s highly readable and can be used as an alternative of data.frame

amapGeocode is inspired by baidumap and baidugeo. If you want to choose the Baidu Map API, these packages are good choices.

However, AutoNavi has significant high precise, in my case, the Results from Baidu were unsatisfactory.

BIG NEWS: Parallel is Here! But you need a plan

Since v0.5.1, parallel framework is implemented by furrr package, of which backend is future package. Refering to A Future for R: Best Practices for Package Developers and avoiding potential modification to the future strategy, we have removed the automatically parallel operation from every function in amapGeocode.

To turn on parallel operation support, just call future::plan(multisession) # or any other future strategy.

Since v0.5, parallel operation finally comes to amapGeocode with the parallel package as the backend. There is a really huge performance improvement for batch queries. And you are welcomed to make a benchmark by following command.

library(amapGeocode)
library(future)
library(readr)
sample_site <-
  read_csv("https://gist.githubusercontent.com/womeimingzi11/0fa3f4744f3ebc0f4484a52649f556e5/raw/47a69157f3e26c4d3bc993f3715b9ba88cda9d93/sample_site.csv")

str(sample_site)

# Here is the old implement
start_time <- proc.time()
old <- lapply(sample_site$address, amapGeocode:::getCoord.individual)
proc.time() - start_time

# Here is the new implement
plan(multisession)
start_time <- proc.time()
new <- getCoord(sample_site$address)
proc.time() - start_time

While parallel support is a totally threads depending operation, so you will get completely different speed on different devices.

Installation

You can install the released version of amapGeocode from CRAN with:

install.packages("amapGeocode")

To install the development version, run following command:

remotes::install_github('womeimingzi11/amapGeocode')

Usage

Geocoding

Before start geocoding and reverse geocoding, please apply a AutoNavi Map API Key. Set amap_key globally by following command:

Then get results of geocoding, by getCoord function.

library(amapGeocode)
# An individual request
res <- getCoord("四川省中医院")
knitr::kable(res)
lng lat formatted_address country province city district township street number citycode adcode
104.0431 30.6678 四川省成都市金牛区四川省中医院 中国 四川省 成都市 金牛区 NA NA NA 028 510106
# Batch requests
res <- getCoord(c("四川省中医院", "四川省人民医院", "成都中医药大学十二桥校区"))
knitr::kable(res)
lng lat formatted_address country province city district township street number citycode adcode
104.0431 30.66780 四川省成都市金牛区四川省中医院 中国 四川省 成都市 金牛区 NA NA NA 028 510106
104.0390 30.66362 四川省成都市青羊区四川省人民医院 中国 四川省 成都市 青羊区 NA NA NA 028 510105
104.0439 30.66629 四川省成都市金牛区成都中医药大学十二桥校区 中国 四川省 成都市 金牛区 NA NA NA 028 510106

The responses we get from AutoNavi Map API is JSON or XML. For readability, we transform them to data.table, by setting output argument as data.table by default.

If you want to extract information from JSON or XML. The results can further be parsed by extractCoord.

# An individual request
res <- getCoord("成都中医药大学", output = "JSON")
res
#> $status
#> [1] "1"
#> 
#> $info
#> [1] "OK"
#> 
#> $infocode
#> [1] "10000"
#> 
#> $count
#> [1] "1"
#> 
#> $geocodes
#> $geocodes[[1]]
#> $geocodes[[1]]$formatted_address
#> [1] "四川省成都市金牛区成都中医药大学"
#> 
#> $geocodes[[1]]$country
#> [1] "中国"
#> 
#> $geocodes[[1]]$province
#> [1] "四川省"
#> 
#> $geocodes[[1]]$citycode
#> [1] "028"
#> 
#> $geocodes[[1]]$city
#> [1] "成都市"
#> 
#> $geocodes[[1]]$district
#> [1] "金牛区"
#> 
#> $geocodes[[1]]$township
#> list()
#> 
#> $geocodes[[1]]$neighborhood
#> $geocodes[[1]]$neighborhood$name
#> list()
#> 
#> $geocodes[[1]]$neighborhood$type
#> list()
#> 
#> 
#> $geocodes[[1]]$building
#> $geocodes[[1]]$building$name
#> list()
#> 
#> $geocodes[[1]]$building$type
#> list()
#> 
#> 
#> $geocodes[[1]]$adcode
#> [1] "510106"
#> 
#> $geocodes[[1]]$street
#> list()
#> 
#> $geocodes[[1]]$number
#> list()
#> 
#> $geocodes[[1]]$location
#> [1] "104.043284,30.666864"
#> 
#> $geocodes[[1]]$level
#> [1] "兴趣点"

extractCoord is created to get a result as a data.table.

tb <- extractCoord(res)
knitr::kable(tb)
lng lat formatted_address country province city district township street number citycode adcode
104.0433 30.66686 四川省成都市金牛区成都中医药大学 中国 四川省 成都市 金牛区 NA NA NA 028 510106

Reverse Geocoding

get results of reverse geocoding, by getLocation function.

res <- getLocation(104.043284, 30.666864)
knitr::kable(res)
formatted_address country province city district township citycode towncode
四川省成都市金牛区西安路街道成都中医药大学附属医院腹泻门诊成都中医药大学十二桥校区 中国 四川省 成都市 金牛区 西安路街道 028 510106024000

extractLocation is created to get a result as a data.table.

Get Subordinate Administrative Region

get results of reverse geocoding, by getAdmin function.

There is a difference between getAdmin and other function, no matter the output argument is data.table or not, the result won’t be a jointed table by different parent administrative region. For example, with the output = data.table, all the lower level administrative region of Province A and Province B will be bound as one data.table, respectively. But the table of province A and table of province B won’t be bound further.

Because this function supports different administrative region levels, it is nonsense to bind their results.

res <- getAdmin(c("四川省", "成都市", "济宁市"))
knitr::kable(res)
lng lat name level citycode adcode
106.7537 31.85881 巴中市 city 0827 511900
104.0657 30.65946 成都市 city 028 510100
105.8298 32.43367 广元市 city 0839 510800
106.0830 30.79528 南充市 city 0817 511300
104.3987 31.12799 德阳市 city 0838 510600
104.7417 31.46402 绵阳市 city 0816 510700
105.5713 30.51331 遂宁市 city 0825 510900
104.6419 30.12221 资阳市 city 0832 512000
106.6334 30.45640 广安市 city 0826 511600
105.0661 29.58708 内江市 city 1832 511000
107.5023 31.20948 达州市 city 0818 511700
103.8318 30.04832 眉山市 city 1833 511400
104.7734 29.35277 自贡市 city 0813 510300
105.4433 28.88914 泸州市 city 0830 510500
104.6308 28.76019 宜宾市 city 0831 511500
103.7613 29.58202 乐山市 city 0833 511100
101.7160 26.58045 攀枝花市 city 0812 510400
102.2587 27.88676 凉山彝族自治州 city 0834 513400
103.0010 29.98772 雅安市 city 0835 511800
102.2214 31.89979 阿坝藏族羌族自治州 city 0837 513200
101.9638 30.05066 甘孜藏族自治州 city 0836 513300
lng lat name level citycode adcode
103.6279 30.99114 都江堰市 district 028 510181
103.9412 30.98516 彭州市 district 028 510182
103.5224 30.58660 大邑县 district 028 510129
104.2549 30.88344 青白江区 district 028 510113
103.6710 30.63148 崇州市 district 028 510184
104.5503 30.39067 简阳市 district 028 510185
103.5115 30.19436 蒲江县 district 028 510131
104.4156 30.85842 金堂县 district 028 510121
103.8124 30.41428 新津区 district 028 510118
103.4614 30.41327 邛崃市 district 028 510183
103.8368 30.69800 温江区 district 028 510115
104.0517 30.63086 武侯区 district 028 510107
103.9227 30.57324 双流区 district 028 510116
103.8878 30.80875 郫都区 district 028 510117
104.0435 30.69206 金牛区 district 028 510106
104.1602 30.82422 新都区 district 028 510114
104.2692 30.56065 龙泉驿区 district 028 510112
104.1031 30.66027 成华区 district 028 510108
104.0557 30.66765 青羊区 district 028 510105
104.0810 30.65769 锦江区 district 028 510104
lng lat name level citycode adcode
116.9919 35.59279 曲阜市 district 0537 370881
116.4871 35.72175 汶上县 district 0537 370830
116.9667 35.40526 邹城市 district 0537 370883
117.2736 35.65322 泗水县 district 0537 370831
116.5953 35.41483 任城区 district 0537 370811
116.3429 35.39810 嘉祥县 district 0537 370829
116.0896 35.80184 梁山县 district 0537 370832
116.6500 34.99771 鱼台县 district 0537 370827
116.3104 35.06977 金乡县 district 0537 370828
116.8290 35.55644 兖州区 district 0537 370812
117.1286 34.80953 微山县 district 0537 370826

extractAdmin is created to get results as tibble.

Convert coordinate point from other coordinate system to AutoNavi

get results of reverse geocoding, by convertCoord function, here is how to convert coordinate from gps to AutoNavi.

Please not, this is still a very experimental function because I have no experience at converting coordinates. The implementation of this input method is not as delicate as I expect. If you have any good idea, please let me know or just fork repo and pull a reques.

res <- convertCoord("116.481499,39.990475", coordsys = "gps")
knitr::kable(res)
lng lat
116.4876 39.99175

extractConvertCoord is created to get result as data.table.

Bug report

It’s very common for API upgrades to make the downstream application, like amapGeocode,which is unavailable. Feel free to let me know once it’s broken or just open an Issue.

Acknowledgements

Hex Sticker was created by hexSticker package with the world data from rnaturalearth.

Code of Conduct

Please note that the amapGeocode project is released with a Contributor Code of Conduct. By contributing to this project, you agree to abide by its terms.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.