The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

A short introduction to ggthemeUL package

Marjan Cugmas

Introduction

The ggthemeUL package provides essential tools to produce charts that align with the comprehensive visual identity of the University of Ljubljana and its members. The rules defined by the comprehensive visual identity will be implemented starting January 1st, 2024.

This package is designed to complement the functionality of ggplot2, which can be installed from CRAN. The ggthemeUL package itself can be downloaded from the R-Forge repository.

Please note that ggthemeUL is currently under active development. For suggestions or error reporting, please contact Marjan Cugmas at .

While ggthemeUL is intended for basic adjustments to the visual appearance of charts, more complex chart types and customizations may require additional modifications. In such cases, consider using functions like scale_*_steps and scale_*_gradient. For a deeper understanding of these customizations, the book ggplot2: Elegant Graphics for Data Analysis (https://ggplot2-book.org/) is highly recommended.

To ensure visual accessibility, consider using the colorBlindness package. Specifically, the displayAllColors function (e.g, displayAllColors(ul_color())) allows you to preview colors considering various types of visual impairments, and cvdPlot enables you to display ggplot objects as they would be perceived by individuals with different types of visual impairments. Consider also Coblis - Color Blindness Simulator.

# install.packages("ggthemeUL", repos="http://R-Forge.R-project.org")
library(ggthemeUL)
#> Loading required package: ggplot2

library(ggplot2)
library(scales)

Color palettes

The visual identity defines six unique colors across three color palettes. The primary color palette is typically used for chart annotations such as text color and bandings color.

For marking attributes, the secondary color palettes should be employed. When utilizing these palettes, it is advisable to avoid combining red and green hues (for example, pink and turquoise or green and burgundy). Such combinations may not be accessible to visually impaired individuals. The colorBlindness package can always be used to test color accessibility.

The primary color palettes comprises four distinct colors. The red color, as the foundational color of the University of Ljubljana, should be used sparingly, typically reserved for special highlights or accent elements. The antracit color is intended to serve as a substitute for traditional black, and is recommended as the primary color for text. The color named lajt may be used as a background color in certain instances.

red
#E03127
antracit
#58595b
medium
#A7A8AA
lajt
#E8E9EA

The cold color palette is comprised of a selection of two hues each of blue and green.

darkblue
#0033a0
navyblue
#0082C0
turquoise
#00B1AC
green
#00694E

The warm color palette contains four different hues.

yellow
#EACE12
orange
#CB511C
burgundy
#9A2F31
pink
#C43788

You can retrieve the HEX codes of individual colors by invoking the ul_color function (all available HEX codes will be returned in the case you do not set any color name). For example:

ul_color("lajt")
#> [1] "#E8E9EA"

Theme UL

The theme_ul function applies minor visual adjustments to a chart, such as rendering titles in bold. By default, the legend is positioned at the top of the plot, the panel background color is set to ‘lajt’, and the plot background color is white. However, there may be instances where you’d want the plot background color to match the ‘lajt’ color, such as when it aligns with the background color of a publication. In such scenarios, use plot.background.fill = “#E8E9EA” or plot.background.fill = ul_color(“lajt”) to modify the plot’s background color.

Below is an illustration of how the theme_ul function is used, compared to the default settings. It should be noted that it is employed in conjunction with the ul_color function to determine the color of the bars as well as the color of the horizontal line.

basicChart <- ggplot(df, aes(x = country)) +  
  geom_bar() + 
  geom_hline(yintercept = 5) +
  labs(x = element_blank(),        
       y = "Frequency",        
       title = "Lorem ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.")

basicChart

basicChart +
  geom_bar(fill = ul_color("navyblue")) +   
  geom_hline(yintercept = 5, color = ul_color("red")) +
  theme_ul(plot.background.fill =  "#E8E9EA")

If you wish to modify certain adjustments applied by theme_ul, you can easily do so by using the theme function to override these settings. For instance, if you want to change the color of the chart title to red, you can do this:

basicChart +
  geom_bar(fill = ul_color("navyblue")) +   
  geom_hline(yintercept = 5, color = ul_color("red")) +
  theme_ul(plot.background.fill =  "#E8E9EA") +
  theme(plot.title = element_text(color="red")) 

Nominal scales

When visualizing a variable of nominal scale, the scale_fill_ul function can be used without specifying any additional parameters. This function will employ all the colors from both the cold and warm color palettes in an order that optimizes visual distinction between the colors. However, it is recommended to limit the colors by selecting either scale_fill_ul("cold") for cold colors, or scale_fill_ul("warm") for warm colors.

If the data comprises too many categories, consider applying a data transformation (this could include excluding or combining categories to reduce their number) or supplementing color with textures or patterns for better differentiation.

basicChart <- ggplot(df, aes(x = country, y = height, fill = country)) +
  facet_grid(.~gender) +
  geom_boxplot(show.legend = FALSE) +
  labs(y = "Sentiment", x = element_blank()) +
  theme_ul(legend.justification = c(0, 1)) +
  scale_y_continuous(labels = dollar_format(suffix=" cm",prefix="")) +
  labs(x = element_blank(),        
       y = element_blank(),        
       title = "Height ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.") 

basicChart + scale_fill_ul() 
basicChart + scale_fill_ul("cold") 

Converging scales

An alternative to employing various hues is to modulate the shades of a single hue (this is called converging color scale). This method is especially advantageous for individuals with color blindness, as well as for instances that require black and white printing. Besides, it often produces a more coherent and aesthetically pleasing visual. This approach can also be applied to ordinal variables, depending on the variable’s content.

This can be accomplished by passing the name of a color to the scale_fill_ul function, which will automatically generate a gradient of that hue with different shades. Below, I have also set reverse = TRUE, which inverts the order of the generated colors.

basicChart + scale_fill_ul("navyblue", reverse = TRUE) 

A similar approach can be adopted for interval and ratio variables. In this case, set discrete = FALSE within the scale_color_ul or scale_fill_ul functions. Note that you can also specify additional parameters, such as limits to determine the minimum and maximum values of a variable (the default is derived from the data). This is particularly useful when natural limits exist.

By adjusting the values parameter, you can manipulate the midpoint of the color scale. However, this is not generally recommended. If an asymmetric color scale is required, transforming the variable would typically provide a more consistent approach.

basicChartCont <- ggplot(df, aes(x = age, y = height, color = weight)) +   
  geom_point(size = 5) +   
  theme_ul(legend.justification = c(0, 1)) +
  labs(x = "Age (years)",        
       y = "Height (cm)",        
       title = "Lorem ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.",
       color = "Weight") 

basicChartCont + scale_color_ul(palette = "navyblue", discrete = FALSE)
basicChartCont + scale_color_ul(palette = "navyblue", discrete = FALSE, values = c(0, 0.8, 1))

Diverging scales

Diverging color scales are utilized when it’s important to illustrate how quantities deviate in two directions from a specific breakpoint. Commonly, this breakpoint is established to visually distinguish values above or below zero, or to separate values on either side of a specified threshold. This could be a target value, an average, or a median value.

In the realm of social sciences, these scales are often employed to visualize responses captured on a Likert scale. The ggthemeUL package provides several diverging scales. The red-green (redGreen) and blue-turquoise (blueTurquoise) hue combinations are commonly used. The blue-turquoise combination tends to be more neutral, avoiding the implication of negative or positive sentiment often associated with red-green scales. For other avaiable divering scales look at the package’s manual.

Below, I demonstrate the application of the redGreen scale, along with the use of a white fill for the panel background. In this context, the exact percentage values are not particularly crucial, so to maintain a clean and focused visualization, the major grid lines are rendered invisible by setting their color to white.

df$country <- factor(df$country, levels = rev(c("Slovenia", "Croatia", "France", "Austria")))
ggplot(df, aes(y = country, fill = satisfaction)) +
  scale_x_continuous(labels = dollar_format(suffix=" %",prefix="", scale = 100)) +
  geom_bar(position = position_fill(reverse = TRUE)) +
  scale_fill_ul("redGreen") +
  theme_ul(panel.background.fill = "white", panel.grid.major.color = "white") +
    labs(x = element_blank(),        
       y = element_blank(),        
       title = "Lorem ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.",
       fill = "Agreement") 

Exactly the same function can be applied in the case of a neutral category. If a variable has even number of levels (i.e., possible values), the middle one will be treated as a neutral category (asymmetric scales are not yet supported).

The same function can also be utilized in scenarios where there’s a neutral category. If the variable has an even number of levels (i.e., possible values), the midpoint level is treated as neutral. Please note that asymmetric scales are not yet supported. If you need asymmetric scales, then define the values manualy within the functions such as scale_fill_manual.

basicChart <- ggplot(df, aes(y = country, fill = satisfactionWithNeutral)) +
  geom_bar(position = position_fill(reverse = TRUE)) +
  guides(fill = guide_legend(nrow = 1)) +
  theme_ul() +
  labs(fill = element_blank()) +
  scale_x_continuous(labels = dollar_format(suffix=" %",prefix="", scale = 100)) +
  theme_ul(plot.background.fill = ul_color("lajt")) +
      labs(x = element_blank(),        
       y = element_blank(),        
       title = "Lorem ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.",
       fill = "Agreement") 

basicChart + scale_fill_ul("redGreen")

By setting the parameter neutralColor one can change the color of the neutral category. However, not that in the current implementation, the selected color also affect the color of the surrounding categories. Use this feature with caution.

Be aware that when using the ‘lajt’ color to color both the plot background and a neutral category, the neutral category may not be distinctly visible on the chart due to the color match with the background. In such cases, you can make the legend keys distinct by setting legend.key = element_rect(color = ul_color("antracit"), fill = "transparent") within the theme_ul function, or by defining color = ul_color("antracit") within the geom_bar function. However, keep in mind that the latter approach may not be ideal. This is because employing the same color for both the neutral category and the background intends to convey a sense of empty space between the ‘agreement’ and ‘disagreement’ categories.

ggplot(df, aes(y = country, fill = satisfactionWithNeutral)) +
  geom_bar(position = position_fill(reverse = TRUE)) +
  guides(fill = guide_legend(nrow = 1)) +
  scale_x_continuous(labels = dollar_format(suffix=" %",prefix="", scale = 100)) +
  scale_fill_ul("redGreen", neutralColor = "lajt") +   
  theme_ul(legend.key = element_rect(color = ul_color("antracit"), 
                                     fill = "transparent"), 
           plot.background.fill = ul_color("lajt")) +
  labs(fill = element_blank()) +
      labs(x = element_blank(),        
       y = element_blank(),        
       title = "Lorem ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.",
       fill = "Agreement") 

ggplot(df, aes(y = country, fill = satisfactionWithNeutral)) +
  geom_bar(position = position_fill(reverse = TRUE), color = ul_color("antracit")) +
  guides(fill = guide_legend(nrow = 1)) +
  scale_x_continuous(labels = dollar_format(suffix=" %",prefix="", scale = 100)) +
  scale_fill_ul("redGreen", neutralColor = "lajt") +   
  theme_ul(plot.background.fill = ul_color("lajt")) +
  labs(fill = element_blank()) +
      labs(x = element_blank(),        
       y = element_blank(),        
       title = "Lorem ipsum dolor sit amet",        
       caption = "Data source: this is all fake data.",        
       subtitle = "Eiusmod tempor incididunt ut labore et dolore magna.",
       fill = "Agreement") 

Note: A better visualisation of such data can be achieved by using the diverging bar charts.Here, the stacks diverge from a central baseline in opposite directions. One advantage of this chart is that the sentiments are clearly presented. This works well if your audience is most interested in the total sentiment of each side and not necessarily comparisons between each individual component. Such charts can be (with some data manipulation) generated using the ggplot2 package (or use sjPlot::plot_likert or likert::likert). However, if you place the neutral category in the middle of the chart along the vertical baseline, there will be a shift between the two groups, and it will appear that the neutral responses are split between the two sentiments. To avoid this issue, you can place a neutral category at the side of the chart (not covered here).

When you want to apply the diverging scale to interval or ratio variables, set the parameter discrete = FALSE.

basicChartCont + scale_color_ul(palette = "redGreen", discrete = FALSE)

You can also adjust the midpoint by altering the midpoint parameter. However, bear in mind that this will result in a symmetric color scale. Should you require an asymmetric color scale (with the most extreme colors dictated by the minimum and maximum values), you will need to specify the values parameter. This parameter is a vector encompassing three values (minimum, midpoint, maximum) set within an interval of 0 and 1. Consequently, you will need to appropriately rescale the midpoint value. For this task, the scales::rescale function proves to be quite useful.

basicChartCont + scale_color_ul(palette = "redGreen", discrete = FALSE, midpoint = 70)
basicChartCont + scale_color_ul(palette = "redGreen", 
                            discrete = FALSE, 
                            values = c(0, 
                                       scales::rescale(70, to = c(0, 1), from = range(df$weight)),
                                       1))

Conclusion

In this document, I’ve highlighted the most frequently utilized features of the ggthemeUL package. Looking ahead, I have plans to further enhance the package by adding features such as asymmetric divergent discrete scales, adjustable neutral category colors, and font customization. However, it is crucial to retain the package’s simplicity to avoid substantial deviations from the University of Ljubljana’s visual identity.

Additionally, remember that you can always export the charts in vector format. This will enable you to continue the production process using software that supports manual manipulation of these files (e.g., Inkscape, Adobe, Affinity).

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.