The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

Response-surface illustration

rsm package, Version 2.10.5

Abstract

In this vignette, we give an illustration, using simulated data, of a sequential-experimentation process to optimize a response surface. I hope that this is helpful for understanding both how to use the rsm package and RSM methodology in general.

The scenario

We will use simulated data from a hypothetical baking experiment. Our goal is to find the optimal amounts of flour, butter, and sugar in a recipe. The response variable is some rating of the texture and flavor of the product. The baking temperature, procedures, equipment, and operating environment will be held constant.

Initial experiment

Our current recipe calls for 1 cup of flour, 0.50 cups of sugar, and 0.25 cups of butter. Our initial experiment will center at this recipe, and we will vary each ingredient by \(\pm0.1\) cup. Let’s start with a minimal first-order experiment, a half-fraction of a \(2^3\) design plus 4 center points. This is a total of 8 experimental runs, which is quite enough given the labor involved. The philosophy of RSM is to do minimal experiments that can be augmented later if necessary if more detail is needed. We’ll generate and randomize the experiment using cube, in terms of coded variables \(x_1,x_2,x_3\):

library(rsm)
expt1 = cube(~ x1 + x2,  x3 ~ x1 * x2, n0 = 4,
            coding = c(x1 ~ (flour - 1)/.1, x2 ~ (sugar - .5)/.1, x3 ~ (butter - .25)/.1))

So here is the protocol for the first design.

expt1
##   run.order std.order flour sugar butter
## 1         1         2   1.1   0.4   0.15
## 2         2         7   1.0   0.5   0.25
## 3         3         3   0.9   0.6   0.15
## 4         4         4   1.1   0.6   0.35
## 5         5         1   0.9   0.4   0.35
## 6         6         6   1.0   0.5   0.25
## 7         7         5   1.0   0.5   0.25
## 8         8         8   1.0   0.5   0.25
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1)/0.1
## x2 ~ (sugar - 0.5)/0.1
## x3 ~ (butter - 0.25)/0.1

It’s important to understand that cube returns a coded dataset; this facilitates response-surface methodology in that analyses are best done on a coded scale. The above design is actually stored in coded form, as we can see by looking at it as an ordinary data.frame:

as.data.frame(expt1)
##   run.order std.order x1 x2 x3
## 1         1         2  1 -1 -1
## 2         2         7  0  0  0
## 3         3         3 -1  1 -1
## 4         4         4  1  1  1
## 5         5         1 -1 -1  1
## 6         6         6  0  0  0
## 7         7         5  0  0  0
## 8         8         8  0  0  0

But hold on a minute… First, assess the strategy

But wait! Before collecting any data, we really should plan ahead and make sure this is all going to work.

First-order design capability

First of all, will this initial design do the trick? One helpful tool in rsm is the varfcn function, which allows us to examine the variance of the predictions we will obtain. We don’t have any data yet, so this is done in terms of a scaled variance, defined as \(\frac N{\sigma^2}\mathrm{Var}(\hat{y}(\mathbf{x}))\), where \(N\) is the number of design points, \(\sigma^2\) is the error variance and \(\hat{y}(\mathbf{x})\) is the predicted value at a design point \(\mathbf{x}\). In turn, \(\hat{y}(\mathbf{x})\) depends on the model as well as the experimental design. Usually, \(\mathrm{Var}(\hat{y}(\mathbf{x}))\) depends most strongly on how far \(\mathbf{x}\) is from the center of the design (which is \(\mathbf{0}\) in coded units). Accordingly, the varfcn function requires us to supply the design and the model, and a few different directions to go from the origin along which to plot the scaled variance (some defaults are supplied if not specified). We can look either at a profile plot or a contour plot:

par(mfrow=c(1,2))
varfcn(expt1, ~ FO(x1,x2,x3))
varfcn(expt1, ~ FO(x1,x2,x3), contour = TRUE)

Not surprisingly, the variance increases as we go farther out—that is, estimation is more accurate in the center of the design than in the periphery. This particular design has the same variance profile in all directions: this is called a rotatable design.

Another important outcome of this is what do not see: there are no error messages. That means we can actually fit the intended model. If we intend to use this design to fit a second-order model, it’s a different story:

varfcn(expt1, ~ SO(x1,x2,x3))
## Error in solve.default(t(mm) %*% mm): Lapack routine dgesv: system is exactly singular: U[5,5] = 0

The point is, varfcn is a useful way to make sure you can estimate the model you need to fit, before collecting any data.

Looking further ahead

As we mentioned, response-surface experimentation uses a building-block approach. It could be that we will want to augment this design so that we can fit a second-order surface. A popular way to do that is to do a followup experiment on axis or “star” points at locations \(\pm\alpha\) so that the two experiments combined may be used to fit a second-order model. Will this work? And if so, what does the variance function look like? Let’s find out. It turns out that a rotatable design is not achievable by adding star points:

try(
  djoin(expt1, star(n0 = 2, alpha = "rotatable"))
)
## Error in star(n0 = 2, alpha = "rotatable", basis = structure(list(run.order = 1:8,  : 
##   Rotatable design is not achievable: inconsistent design moments

But here are the characteristics of a design with \(\alpha = 1.5\):

par(mfrow=c(1,2))
followup = djoin(expt1, star(n0 = 2, alpha = 1.5))
varfcn(followup, ~ Block + SO(x1,x2,x3), main = "Followup")
varfcn(followup, ~ Block + SO(x1,x2,x3), contour = TRUE, main = "Block + SO(x1,x2,x3)")

From this we can tell that we can at least augment the design to fit a second-order model. The model includes a block effect to account for the fact that two separately randomized experiments are combined.

OK, now we can collect some data

Now, pretend that you now go off and baked some cakes according to these recipes.

Time passes…

OK, the baking is over, and the results are in, and we entered them in a new ratings column in expt1:

expt1
##   run.order std.order flour sugar butter rating
## 1         1         2   1.1   0.4   0.15   28.9
## 2         2         7   1.0   0.5   0.25   25.5
## 3         3         3   0.9   0.6   0.15   20.2
## 4         4         4   1.1   0.6   0.35   27.1
## 5         5         1   0.9   0.4   0.35   21.5
## 6         6         6   1.0   0.5   0.25   24.7
## 7         7         5   1.0   0.5   0.25   25.0
## 8         8         8   1.0   0.5   0.25   24.7
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1)/0.1
## x2 ~ (sugar - 0.5)/0.1
## x3 ~ (butter - 0.25)/0.1

We can now analyze the data using a first-order model (implemented in rsm by the FO function). The model is fitted in terms of the coded variables.

anal1 = rsm(rating ~ FO(x1,x2,x3), data=expt1)
summary(anal1)
## 
## Call:
## rsm(formula = rating ~ FO(x1, x2, x3), data = expt1)
## 
##             Estimate Std. Error  t value  Pr(>|t|)    
## (Intercept) 24.70000    0.17963 137.5077 1.678e-08 ***
## x1           3.57500    0.25403  14.0731 0.0001479 ***
## x2          -0.77500    0.25403  -3.0508 0.0379977 *  
## x3          -0.12500    0.25403  -0.4921 0.6484543    
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## 
## Multiple R-squared:  0.9811, Adjusted R-squared:  0.9669 
## F-statistic:  69.2 on 3 and 4 DF,  p-value: 0.0006658
## 
## Analysis of Variance Table
## 
## Response: rating
##                Df Sum Sq Mean Sq F value    Pr(>F)
## FO(x1, x2, x3)  3 53.587 17.8625 69.2010 0.0006658
## Residuals       4  1.033  0.2581                  
## Lack of fit     1  0.605  0.6050  4.2456 0.1314343
## Pure error      3  0.427  0.1425                  
## 
## Direction of steepest ascent (at radius 1):
##          x1          x2          x3 
##  0.97672947 -0.21173856 -0.03415138 
## 
## Corresponding increment in original units:
##        flour        sugar       butter 
##  0.097672947 -0.021173856 -0.003415138

The take-home message here is that the first-order model does help explain the variations in the response (significant \(F\) statistic for the model, as well as two of the three coefficients of \(x_j\) are fairly significant); and also that there is no real evidence that the model does not fit (large P value for lack of fit). Finally, there is information on the direction of steepest ascent, which suggests that we could improve the ratings by increasing the flour and decreasing the sugar and butter (by smaller amounts in terms of coded units).

Explore the path of steepest-ascent

The direction of steepest ascent is our best guess for how we can improve the recipe. The steepest function provides an easy way to find some steps in the right direction, up to a distance of 5 (in coded units) by default:

( sa1 = steepest(anal1) )
## Path of steepest ascent from ridge analysis:
##    dist    x1     x2     x3 |  flour  sugar butter |   yhat
## 1   0.0 0.000  0.000  0.000 | 1.0000 0.5000 0.2500 | 24.700
## 2   0.5 0.488 -0.106 -0.017 | 1.0488 0.4894 0.2483 | 26.529
## 3   1.0 0.977 -0.212 -0.034 | 1.0977 0.4788 0.2466 | 28.361
## 4   1.5 1.465 -0.318 -0.051 | 1.1465 0.4682 0.2449 | 30.190
## 5   2.0 1.953 -0.423 -0.068 | 1.1953 0.4577 0.2432 | 32.018
## 6   2.5 2.442 -0.529 -0.085 | 1.2442 0.4471 0.2415 | 33.851
## 7   3.0 2.930 -0.635 -0.102 | 1.2930 0.4365 0.2398 | 35.680
## 8   3.5 3.419 -0.741 -0.120 | 1.3419 0.4259 0.2380 | 37.512
## 9   4.0 3.907 -0.847 -0.137 | 1.3907 0.4153 0.2363 | 39.341
## 10  4.5 4.395 -0.953 -0.154 | 1.4395 0.4047 0.2346 | 41.170
## 11  5.0 4.884 -1.059 -0.171 | 1.4884 0.3941 0.2329 | 43.002

The yhat values show what the fitted model anticipates for the rating; but as we move to further distances, these are serious extrapolations and can’t be trusted. What we need is real data! So let’s do a little experiment along this path, using the distances from 0.5 to 4.0, for a total of 8 runs. The dupe function makes a copy of these runs and re-randomizes the order.

expt2 = dupe(sa1[2:9, ])

Now we need to do some more baking based on this design. Time passes…

The data are now collected; and we have these results:

expt2
##   run.order std.order dist    x1     x2     x3 |  flour  sugar butter |.1   yhat rating
## 1         1         8  4.0 3.907 -0.847 -0.137 | 1.3907 0.4153 0.2363   | 39.341   24.3
## 2         2         4  2.0 1.953 -0.423 -0.068 | 1.1953 0.4577 0.2432   | 32.018   26.6
## 3         3         1  0.5 0.488 -0.106 -0.017 | 1.0488 0.4894 0.2483   | 26.529   24.8
## 4         4         3  1.5 1.465 -0.318 -0.051 | 1.1465 0.4682 0.2449   | 30.190   27.5
## 5         5         7  3.5 3.419 -0.741 -0.120 | 1.3419 0.4259 0.2380   | 37.512   27.3
## 6         6         6  3.0 2.930 -0.635 -0.102 | 1.2930 0.4365 0.2398   | 35.680   27.8
## 7         7         5  2.5 2.442 -0.529 -0.085 | 1.2442 0.4471 0.2415   | 33.851   26.0
## 8         8         2  1.0 0.977 -0.212 -0.034 | 1.0977 0.4788 0.2466   | 28.361   25.3

With a steepest-ascent path, the idea is to find the highest point along this path, and center the next experiment there. To that end, let’s look at it graphically:

plot(rating ~ dist, data = expt2)
anal2 = lm(rating ~ poly(dist, 2),  data = expt2)
with(expt2, {
    ord = order(dist)
    lines(dist[ord], predict(anal2)[ord])
})

There is a fair amount of variation here, so the fitted quadratic curve provides useful guidance. It suggests that we do our next experiment at a distance of about \(2.5\) in coded units, i.e., near point #6 in the steepest-ascent path, sa1. Let’s use somewhat rounder values: flour:\(1.25\)cups, sugar:\(0.45\)cups, and butter:\(0.25\)cups (unchanged from expt1).

Relocated experiment

We can run basically the same design we did the first time around, only with the new center. This is easily done using dupe and changing the codings:

expt3 = dupe(expt1)
codings(expt3) = c(x1 ~ (flour - 1.25)/.1,  x2 ~ (sugar - .45)/.1,  x3 ~ (butter - .25)/.1)

Again, off to do more baking … Once the data are collected, we have:

expt3
##   run.order std.order flour sugar butter rating
## 1         1         5  1.25  0.45   0.25   26.6
## 2         2         2  1.35  0.35   0.15   25.3
## 3         3         4  1.35  0.55   0.35   23.7
## 4         4         3  1.15  0.55   0.15   26.0
## 5         5         7  1.25  0.45   0.25   27.8
## 6         6         6  1.25  0.45   0.25   26.2
## 7         7         1  1.15  0.35   0.35   27.3
## 8         8         8  1.25  0.45   0.25   27.2
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1.25)/0.1
## x2 ~ (sugar - 0.45)/0.1
## x3 ~ (butter - 0.25)/0.1

… and we do the same analysis:

anal3 = rsm(rating ~ FO(x1,x2,x3), data=expt3)
summary(anal3)
## 
## Call:
## rsm(formula = rating ~ FO(x1, x2, x3), data = expt3)
## 
##             Estimate Std. Error t value  Pr(>|t|)    
## (Intercept) 26.26250    0.40509 64.8306 3.391e-07 ***
## x1          -1.07500    0.57289 -1.8765    0.1338    
## x2          -0.72500    0.57289 -1.2655    0.2744    
## x3          -0.07500    0.57289 -0.1309    0.9022    
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## 
## Multiple R-squared:  0.5624, Adjusted R-squared:  0.2341 
## F-statistic: 1.713 on 3 and 4 DF,  p-value: 0.3015
## 
## Analysis of Variance Table
## 
## Response: rating
##                Df Sum Sq Mean Sq F value  Pr(>F)
## FO(x1, x2, x3)  3 6.7475  2.2492  1.7132 0.30145
## Residuals       4 5.2512  1.3128                
## Lack of fit     1 3.7812  3.7812  7.7168 0.06911
## Pure error      3 1.4700  0.4900                
## 
## Direction of steepest ascent (at radius 1):
##          x1          x2          x3 
## -0.82768868 -0.55820864 -0.05774572 
## 
## Corresponding increment in original units:
##        flour        sugar       butter 
## -0.082768868 -0.055820864 -0.005774572

This may not seem too dissimilar to the anal1 results, and if you think so, that would suggest we just do another steepest-ascent step. However, none of the linear (first-order) effects are statistically significant, nor are they even jointly significant (\(P\approx0.30\) in the ANOVA table); so we don’t have a compelling case that we even know what that direction might be! It seems better to instead collect more data in this region and see if we get more clarity.

Foldover experiment

Recall that our first experiment was a half-fraction plus center points. We can get more information by doing the other fraction. This is accomplished using the foldover function, which reverses the signs of some or all of the coded variables (and also re-randomizes the experiment). In this case, the original experiment was generated using \(x_3=x_1x_2\), so if we reverse \(x_1\), we will have \(x_3=-x_1x_2\), thus the other half of the experiment.

expt4 = foldover(expt3, variable = "x1")
expt4$rating = NULL  ### discard previous rating data
expt4   # Here's the new protocol
##   run.order std.order flour sugar butter
## 1         1         2  1.15  0.35   0.15
## 2         2         7  1.25  0.45   0.25
## 3         3         3  1.35  0.55   0.15
## 4         4         4  1.15  0.55   0.35
## 5         5         5  1.25  0.45   0.25
## 6         6         6  1.25  0.45   0.25
## 7         7         8  1.25  0.45   0.25
## 8         8         1  1.35  0.35   0.35
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1.25)/0.1
## x2 ~ (sugar - 0.45)/0.1
## x3 ~ (butter - 0.25)/0.1

Note that this experiment does indeed have different factor combinations (e.g., \((1.15,.35,.15))\) not present in expt3.

Back to the kitchen again…

Once the data are collected, we have:

expt4
##   run.order std.order flour sugar butter rating
## 1         1         2  1.15  0.35   0.15   34.0
## 2         2         7  1.25  0.45   0.25   35.1
## 3         3         3  1.35  0.55   0.15   31.0
## 4         4         4  1.15  0.55   0.35   34.6
## 5         5         5  1.25  0.45   0.25   35.5
## 6         6         6  1.25  0.45   0.25   34.9
## 7         7         8  1.25  0.45   0.25   35.1
## 8         8         1  1.35  0.35   0.35   33.3
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1.25)/0.1
## x2 ~ (sugar - 0.45)/0.1
## x3 ~ (butter - 0.25)/0.1

For analysis, we will combine expt3 and expt4, which is easily accomplished with the djoin function. Note that djoin creates an additional blocking factor:

names( djoin(expt3, expt4) )
## [1] "run.order" "std.order" "x1"        "x2"        "x3"        "rating"    "Block"

It’s important to include this block effect in the model because we have two separately randomized experiments. In this particular case, it’s especially important because expt4 seems to have higher values overall than expt3; either the raters are in a better mood, or ambient conditions have changed. Here is our analysis:

anal4 = rsm(rating ~ Block + FO(x1,x2,x3), data = djoin(expt3, expt4))
summary(anal4)
## 
## Call:
## rsm(formula = rating ~ Block + FO(x1, x2, x3), data = djoin(expt3, 
##     expt4))
## 
##             Estimate Std. Error t value  Pr(>|t|)    
## (Intercept) 26.26250    0.40329 65.1208 1.388e-15 ***
## Block2       7.92500    0.57034 13.8953 2.543e-08 ***
## x1          -1.07500    0.40329 -2.6656   0.02197 *  
## x2          -0.57500    0.40329 -1.4258   0.18169    
## x3           0.32500    0.40329  0.8059   0.43739    
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## 
## Multiple R-squared:  0.9486, Adjusted R-squared:  0.9299 
## F-statistic: 50.72 on 4 and 11 DF,  p-value: 5.075e-07
## 
## Analysis of Variance Table
## 
## Response: rating
##                Df  Sum Sq Mean Sq  F value    Pr(>F)
## Block           1 251.223 251.223 193.0793 2.543e-08
## FO(x1, x2, x3)  3  12.735   4.245   3.2625  0.063177
## Residuals      11  14.313   1.301                   
## Lack of fit     5  12.653   2.531   9.1464  0.008934
## Pure error      6   1.660   0.277                   
## 
## Direction of steepest ascent (at radius 1):
##         x1         x2         x3 
## -0.8520282 -0.4557360  0.2575899 
## 
## Corresponding increment in original units:
##       flour       sugar      butter 
## -0.08520282 -0.04557360  0.02575899

Now one of the first-order terms is significant. The lack of fit test is also quite significant. Response-surface experimentation is different from some other kinds of experiments in that it’s actually “ideal” in a way to have nonsignificant effects, especially first-order ones, because it would suggest we might be close to the peak. Well, we have one big first-order effect, but evidence of curvature; let’s carry on.

Augmenting further to estimate a second-order response surface

Because there is lack of fit, it’s now a good idea to collect data at the “star” or axis points so that we can fit a second-order model. As illustrated earlier, the star function does this for us. We will choose the parameter alpha (\(\alpha\)) so that the star block is orthogonal to the cube blocks; this seems like a good idea, given how strong we have observed the block effect to be. So here is the next experiment, using the six axis points and 2 center points (we already have 8 center points at this location), for 8 runs. The analysis will be based on combining the cube clock, its foldover, and the star block:

expt5 = star(expt4, n0 = 2, alpha = "orthogonal")
par(mfrow=c(1,2))
comb = djoin(expt3, expt4, expt5)
varfcn(comb, ~ Block + SO(x1,x2,x3), main = "Further augmented")
varfcn(comb, ~ Block + SO(x1,x2,x3), contour = TRUE, main = "2nd order")

This is not the second-order design we contemplated earlier, because it involves adding star points to the complete \(2^3\) design; but it has reasonable prediction-variance properties.

Time passes, more cakes are baked and rated, and we have these data:

expt5
##   run.order std.order    flour     sugar    butter rating
## 1         1         4 1.250000 0.5914214 0.2500000   26.0
## 2         2         2 1.391421 0.4500000 0.2500000   23.9
## 3         3         6 1.250000 0.4500000 0.3914214   27.6
## 4         4         7 1.250000 0.4500000 0.2500000   26.7
## 5         5         1 1.108579 0.4500000 0.2500000   26.7
## 6         6         5 1.250000 0.4500000 0.1085786   27.3
## 7         7         3 1.250000 0.3085786 0.2500000   29.3
## 8         8         8 1.250000 0.4500000 0.2500000   27.4
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1.25)/0.1
## x2 ~ (sugar - 0.45)/0.1
## x3 ~ (butter - 0.25)/0.1

We will fit a second-order model, accounting for the block effect.

anal5 = rsm(rating ~ Block + SO(x1,x2,x3), data = djoin(expt3, expt4, expt5))
summary(anal5)
## 
## Call:
## rsm(formula = rating ~ Block + SO(x1, x2, x3), data = djoin(expt3, 
##     expt4, expt5))
## 
##                Estimate  Std. Error  t value  Pr(>|t|)    
## (Intercept)  2.6996e+01  2.5051e-01 107.7647 < 2.2e-16 ***
## Block2       7.9250e+00  2.9641e-01  26.7366 4.601e-12 ***
## Block3       6.0000e-01  2.9641e-01   2.0242  0.065795 .  
## x1          -1.0466e+00  1.7113e-01  -6.1160 5.208e-05 ***
## x2          -7.7224e-01  1.7113e-01  -4.5125  0.000711 ***
## x3           2.5202e-01  1.7113e-01   1.4727  0.166578    
## x1:x2       -4.0000e-01  2.0959e-01  -1.9085  0.080537 .  
## x1:x3       -1.5000e-01  2.0959e-01  -0.7157  0.487888    
## x2:x3       -1.6968e-15  2.0959e-01   0.0000  1.000000    
## x1^2        -1.2393e+00  1.9405e-01  -6.3865 3.471e-05 ***
## x2^2        -6.4286e-02  1.9405e-01  -0.3313  0.746139    
## x3^2        -1.6429e-01  1.9405e-01  -0.8466  0.413766    
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## 
## Multiple R-squared:  0.9881, Adjusted R-squared:  0.9772 
## F-statistic: 90.77 on 11 and 12 DF,  p-value: 8.46e-10
## 
## Analysis of Variance Table
## 
## Response: rating
##                 Df  Sum Sq Mean Sq  F value    Pr(>F)
## Block            2 311.523 155.762 443.2137 5.678e-12
## FO(x1, x2, x3)   3  21.064   7.021  19.9791 5.849e-05
## TWI(x1, x2, x3)  3   1.460   0.487   1.3848  0.294838
## PQ(x1, x2, x3)   3  16.845   5.615  15.9771  0.000172
## Residuals       12   4.217   0.351                   
## Lack of fit      5   2.312   0.462   1.6993  0.252578
## Pure error       7   1.905   0.272                   
## 
## Stationary point of response surface:
##         x1         x2         x3 
##  1.0644952 -9.3180901  0.2810583 
## 
## Stationary point in original units:
##      flour      sugar     butter 
##  1.3564495 -0.4818090  0.2781058 
## 
## Eigenanalysis:
## eigen() decomposition
## $values
## [1] -0.03002067 -0.16052168 -1.27731479
## 
## $vectors
##           [,1]        [,2]       [,3]
## x1  0.16811860 -0.04985422 0.98450530
## x2 -0.98128332 -0.10360829 0.16232180
## x3 -0.09391048  0.99336795 0.06633959

There are significant first and second-order terms now, and nonsignificant lack of fit. The summary includes a canonical analysis which gives the coordinates of the estimated stationary point and the canonical directions (eigenvectors) from that point. That is, the fitted surface is characterized in the form \(\hat{y}(v_1,v_2,v_3) = \hat{y}_s + \lambda_1v_1^2 + \lambda_2v_2^2 + \lambda_3v_3^2\) where \(\hat{y}_s\) is the fitted value at the stationary point, the eigenvalues are denoted \(\lambda_j\), and the eigenvectors are denoted \(v_j\). Since all three eigenvalues are negative, the estimated surface decreases in all directions from its value at \(\hat{y}_s\) and hence there is a maximum there. However, the stationary point is nowhere near the experiment, so this is an extreme extrapolation and not to be trusted at all. (In fact, in decoded units, the estimated optimum calls for a negative amount of sugar!) So the best bet now is to experiment on some path that leads us vaguely toward this distant stationary point.

Ridge analysis (second-order steepest ascent)

The steepest function again may be used; this time it computes a curved path of steepest ascent, based on ridge analysis:

steepest(anal5)
## Path of steepest ascent from ridge analysis:
##    dist     x1     x2    x3 |  flour   sugar butter |   yhat
## 1   0.0  0.000  0.000 0.000 | 1.2500  0.4500 0.2500 | 26.996
## 2   0.5 -0.227 -0.417 0.156 | 1.2273  0.4083 0.2656 | 27.484
## 3   1.0 -0.235 -0.922 0.307 | 1.2265  0.3578 0.2807 | 27.817
## 4   1.5 -0.189 -1.431 0.408 | 1.2311  0.3069 0.2908 | 28.102
## 5   2.0 -0.126 -1.939 0.473 | 1.2374  0.2561 0.2973 | 28.358
## 6   2.5 -0.055 -2.446 0.514 | 1.2445  0.2054 0.3014 | 28.591
## 7   3.0  0.020 -2.951 0.536 | 1.2520  0.1549 0.3036 | 28.804
## 8   3.5  0.098 -3.456 0.546 | 1.2598  0.1044 0.3046 | 28.999
## 9   4.0  0.178 -3.959 0.546 | 1.2678  0.0541 0.3046 | 29.177
## 10  4.5  0.258 -4.459 0.538 | 1.2758  0.0041 0.3038 | 29.337
## 11  5.0  0.339 -4.961 0.525 | 1.2839 -0.0461 0.3025 | 29.481

After a distance of about 3, it starts venturing into unreasonable combinations of design factors. So let’s experiment at 8 distances spread 2/3 apart in coded units:

expt6 = dupe(steepest(anal5, dist = (2:9)/3))
## Path of steepest ascent from ridge analysis:

After the cakes have been baked and rated, we have

expt6
##   run.order std.order      dist     x1     x2    x3 |  flour  sugar butter |.1   yhat rating
## 1         1         3 1.3333333 -0.207 -1.261 0.379 | 1.2293 0.3239 0.2879   | 28.011   35.5
## 2         2         5 2.0000000 -0.126 -1.939 0.473 | 1.2374 0.2561 0.2973   | 28.358   33.8
## 3         3         2 1.0000000 -0.235 -0.922 0.307 | 1.2265 0.3578 0.2807   | 27.817   35.0
## 4         4         1 0.6666667 -0.241 -0.584 0.212 | 1.2259 0.3916 0.2712   | 27.603   34.1
## 5         5         7 2.6666667 -0.030 -2.615 0.523 | 1.2470 0.1885 0.3023   | 28.664   33.3
## 6         6         6 2.3333333 -0.079 -2.278 0.502 | 1.2421 0.2222 0.3002   | 28.516   34.2
## 7         7         4 1.6666667 -0.169 -1.600 0.433 | 1.2331 0.2900 0.2933   | 28.190   34.7
## 8         8         8 3.0000000  0.020 -2.951 0.536 | 1.2520 0.1549 0.3036   | 28.804   33.4

And let’s do an analysis like that of expt2:

par(mar=c(4,4,0,0)+.1)
plot(rating ~ dist, data = expt6)
anal6 = lm(rating ~ poly(dist, 2),  data = expt6)
with(expt6, {
    ord = order(dist)
    lines(dist[ord], predict(anal6)[ord])
})

It looks like we should center a new experiment at a distance of 1.5 or so—perhaps flour still at 1.25, and both sugar and butter at .30.

Second-order design at the new location

We are now in a situation where we already know we have curvature, so we might as well go straight to a second-order experiment. It is less critical to assess lack of fit, so we don’t need as many center points. Note that each of the past experiments has 8 runs—that is the practical size for one block. All these things considered, we decide to run a central-composite design with the cube portion being a complete \(2^3\) design (8 runs with no center points), and the star portion including two center points (another block of 8 runs). Let’s generate the design, and magically do the cooking and the rating for these two 8-run experiments:

expt7  =  ccd( ~ x1 + x2 + x3,  n0 = c(0, 2),  alpha = "orth",  coding  =  c(
            x1 ~ (flour - 1.25)/.1,  x2 ~ (sugar - .3)/.1,  x3 ~ (butter - .3)/.1))

… and after the data are collected:

expt7
##    run.order std.order flour sugar butter Block rating
## 1          1         5  1.15   0.2    0.4     1   26.6
## 2          2         1  1.15   0.2    0.2     1   25.6
## 3          3         6  1.35   0.2    0.4     1   26.6
## 4          4         3  1.15   0.4    0.2     1   26.2
## 5          5         8  1.35   0.4    0.4     1   24.5
## 6          6         7  1.15   0.4    0.4     1   27.3
## 7          7         2  1.35   0.2    0.2     1   23.5
## 8          8         4  1.35   0.4    0.2     1   24.7
## 9          1         8  1.25   0.3    0.3     2   27.9
## 10         2         2  1.45   0.3    0.3     2   22.0
## 11         3         5  1.25   0.3    0.1     2   25.2
## 12         4         3  1.25   0.1    0.3     2   26.5
## 13         5         4  1.25   0.5    0.3     2   25.9
## 14         6         6  1.25   0.3    0.5     2   27.8
## 15         7         1  1.05   0.3    0.3     2   26.0
## 16         8         7  1.25   0.3    0.3     2   29.3
## 
## Data are stored in coded form using these coding formulas ...
## x1 ~ (flour - 1.25)/0.1
## x2 ~ (sugar - 0.3)/0.1
## x3 ~ (butter - 0.3)/0.1

It turns out that to obtain orthogonal blocks, locating the star points at \(\pm\alpha=\pm2\) is the correct choice for these numbers of center points; hence the nice round values. Here’s our analysis; we’ll go straight to the second-order model, and again, we need to include the block effect in the model.

anal7 = rsm(rating ~ Block + SO(x1,x2,x3), data = expt7)
summary(anal7)
## 
## Call:
## rsm(formula = rating ~ Block + SO(x1, x2, x3), data = expt7)
## 
##             Estimate Std. Error t value  Pr(>|t|)    
## (Intercept) 27.90000    0.52417 53.2274 4.426e-08 ***
## Block2       0.70000    0.37064  1.8886  0.117568    
## x1          -0.90000    0.18532 -4.8564  0.004648 ** 
## x2          -0.05000    0.18532 -0.2698  0.798093    
## x3           0.63750    0.18532  3.4400  0.018436 *  
## x1:x2       -0.27500    0.26208 -1.0493  0.342094    
## x1:x3        0.10000    0.26208  0.3816  0.718466    
## x2:x3       -0.40000    0.26208 -1.5262  0.187476    
## x1^2        -1.15000    0.18532 -6.2055  0.001587 ** 
## x2^2        -0.60000    0.18532 -3.2376  0.023010 *  
## x3^2        -0.52500    0.18532 -2.8329  0.036549 *  
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## 
## Multiple R-squared:  0.9421, Adjusted R-squared:  0.8262 
## F-statistic: 8.131 on 10 and 5 DF,  p-value: 0.01602
## 
## Analysis of Variance Table
## 
## Response: rating
##                 Df  Sum Sq Mean Sq F value   Pr(>F)
## Block            1  1.9600  1.9600  3.5669 0.117568
## FO(x1, x2, x3)   3 19.5025  6.5008 11.8305 0.010422
## TWI(x1, x2, x3)  3  1.9650  0.6550  1.1920 0.401731
## PQ(x1, x2, x3)   3 21.2550  7.0850 12.8935 0.008653
## Residuals        5  2.7475  0.5495                 
## Lack of fit      4  1.7675  0.4419  0.4509 0.789337
## Pure error       1  0.9800  0.9800                 
## 
## Stationary point of response surface:
##         x1         x2         x3 
## -0.3421914 -0.1772769  0.6420873 
## 
## Stationary point in original units:
##     flour     sugar    butter 
## 1.2157809 0.2822723 0.3642087 
## 
## Eigenanalysis:
## eigen() decomposition
## $values
## [1] -0.3390336 -0.7534946 -1.1824718
## 
## $vectors
##          [,1]       [,2]         [,3]
## x1  0.1562180 -0.1664741  0.973592470
## x2 -0.6513590  0.7236263  0.228246488
## x3  0.7425142  0.6698144 -0.004609058

The model fits decently, and there are important second-order terms. The most exciting news is that the stationary point is quite close to the design center, and it is indeed a maximum since all three eigenvalues are negative. It looks like the best recipe is around \(1.22\)c.flour, \(.28\)c.sugar, and \(.36\)c.butter. Let’s look at this graphically using the contour function, slicing the fitted surface at the stationary point.

par(cex.lab=1.25, cex.axis=1, cex.sub=1.5, mar=.1+c(4.5,7,0,0))
par(mfrow=c(1,3))
contour(anal7, ~ x1 + x2 + x3, at = xs(anal7), image = TRUE)

It’s also helpful to know how well we have estimated the stationary point. A simple bootstrap procedure helps us understand this. In the code below, we simulate 200 re-fits of the model, after scrambling the residuals and adding them back to the fitted values; then plot the their stationary points along with the one estimated from anal7. The replicate function returns a matrix with 3 rows and 200 columns (one for each bootstrap replication); so we need to transpose the result and decode the values.

fits = predict(anal7)
resids = resid(anal7)
boot.raw = suppressMessages(
    replicate(200, xs(update(anal7, fits + sample(resids, replace=TRUE) ~ .))))
boot = code2val(as.data.frame(t(boot.raw)), codings=codings(anal7))
par(mar=.1+c(4,5,0,0), cex.lab=1.5)
par(mfrow = c(1,3))
plot(sugar ~ flour, data = boot, col = "gray");   points(1.215, .282, col = "red", pch = 7)
plot(butter ~ flour, data = boot, col = "gray");  points(1.215, .364, col = "red", pch = 7)
plot(butter ~ sugar, data = boot, col = "gray");  points(.282, .364, col = "red", pch = 7)

These plots show something akin to a confidence region for the best recipe. Note they do not follow symmetrical elliptical patterns, as would a multivariate normal; this is due primarily to nonlinearity in estimating the stationary point.

Summary

For convenience, here is a tabular summary of what we did

Expt Center Type Runs Result
1 \((1.00,.50,.25)\) \(2^{3-1} + 4\times0\) 8 Fit OK, but we’re on a slope
2 SA path 8 Re-center at distance \(\sim2.5\)
3 \((1.25,.45,.25)\) \(2^{3-1} + 4\times0\) 8 Need more data to say much
4 same Foldover \(+8\) LOF; need second-order design
5 same Star block \(+8\) Suggests move to a new center
6 SA path 8 Re center at distance \(\sim1.5\)
7 \((1.25,.30,.30)\) CCD: \(2^3\); \(\text{star}+2\times0\) \(8+8\) Best recipe: (1.22,.28,.36)

It has required 64 experimental runs to find this optimum. For a home baker, 64 cakes is a lot. But for a commercial baker, that is not too bad considering how much variation there is in the response measures and the fact that now we have a better recipe. If we had just kept baking cakes with the same recipe, we can’t gain knowledge. Only by varying the recipe in disciplined ways can we improve it.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.