%\VignetteIndexEntry{Distributions reference}

\documentclass[nojss,nofooter]{jss}
\usepackage{bm}
\usepackage{tabularx}
\usepackage{graphics}
\usepackage{listings}

\newcommand{\bbeta}{{\bm\beta}}
\newcommand{\x}{{\mathbf{x}}}
\newcommand{\z}{{\mathbf{z}}}
\newcommand{\btheta}{{\bm{\theta}}}
%\newcommand{\code}[1]{\texttt{\detokenize{#1}}}
%\newcommand{\code}[1]{\texttt\lstinline|#1|}

\author{Christopher H. Jackson \\ MRC Biostatistics Unit, Cambridge, UK \\ \email{chris.jackson@mrc-bsu.cam.ac.uk}}

\title{flexsurv: Distributions reference}

\Plainauthor{Christopher Jackson, MRC Biostatistics Unit}

\Abstract{ A reference guide for the distributions built into flexsurv  }
\Keywords{survival}

\begin{document}

This document lists the following information for each of the built-in
distributions in \code{flexsurvreg}. 

\begin{itemize}

  \item How the distribution is identified in the \code{dist} argument
    to \code{flexsurvreg}.

  \item Name of the \code{d} function in R for the probability density, showing
    how names of the arguments in the R function correspond to the
    symbols in the formula for the survivor function.  In each case, there are
    corresponding R functions with names beginning with
    \code{p},\code{q} and \code{r} instead of \code{d}, for the
    cumulative distribution, quantiles and random number generation.

    The R \code{help} page for the function named here will contain more
    information about the distribution, e.g. the probability density
    function, and how particular distributions are defined as special
    cases of other distributions. 

    \item The survivor function $S(t|\btheta)$ as a function of time $t$ and
      the parameters of the distribution $\btheta$.  Any restrictions
      on the allowed values of the parameters are noted. 

      \item The location parameter of the distribution, now indexed by
        $j$, and a function describing how the location parameter
        depends on covariate values $\z_j$ and covariate effects
        $\bbeta$.

        $\bbeta$ are the covariate effects indicated when printing a
\code{flexsurvreg} object, which can take any real value. 

\item A more interpretable covariate effect measure, defined as a
  function of $\bbeta$.

\end{itemize}

  In a \emph{proportional hazards} model, the ``more interpretable'' effect
  measure presented is is the hazard ratio (HR) for one unit of the
  covariate.   

  In an \emph{accelerated failure time model}, the time acceleration
  factor (TAF) for one unit of the covariate is presented.   The
  survivor function is of the form $S(t) = S^*(ct)$ where $c$ is some
  constant that depends on the parameters.   Multiplying $c$ by 2 has
  the same effect on survival as multiplying $t$ by 2, doubling the
  speed of time and halving the expected survival time.   An
  alternative way of presenting effects from an accelerated failure
  time model is the ratio of expected times to the event between covariate values
of 1 and 0.   This equals 1/TAF, and may be easier to interpret if the time to the event is of direct
interest. 

A HR below 1 and a TAF above 1 both indicate that higher covariate values are associated with a higher risk of the event, or shorter times to the event. 


%  So the comparable parameters are exp(-beta) for the lognormal and gengamma 1/exp(beta) = exp(-beta) for the weibull exp(beta) for the gamma and exponential


\subsection*{Weibull (accelerated failure time)}

\verb+flexsurvreg(..., dist="weibull")+\\
\code{dweibull(..., shape=a, scale=mu)}

\[
S(t | \mu, a) = \exp(- (t/\mu)^ a), \qquad \mu>0, a>0
\]

\[ \mu_j = \exp(\z_j \bbeta), \quad TAF = \exp(-\bbeta) \]

\subsection*{Weibull (proportional hazards)}

\verb+flexsurvreg(..., dist="weibullPH")+\\
\code{dweibullPH(..., shape=a, scale=lambda)}

\[
S(t | \lambda, a) = \exp(- \lambda t^ a), \qquad \lambda>0, a>0
\]

\[ \lambda_j = \exp(\z_j \bbeta), \quad HR = \exp(\bbeta) \]

(Note the argument ``scale'' to \code{dweibullPH} would perhaps better have been called
``rate'', given the analogy with the rate of the exponential model).

\subsection*{Gamma}

\verb+flexsurvreg(..., dist="gamma")+\\
\code{dgamma(..., shape=a, scale=mu)}

\[
  S(t | a, \mu) = 1 - \int_{0}^t 
  \frac{x^{a-1} \exp{-(x/\mu)}}{\mu^a \Gamma(a)}
    dx, \qquad \mu>0, a>0
\]

\[
  \mu_j = \exp(\z_j \bbeta), \quad TAF = \exp(\bbeta)
\]

\subsection*{Exponential}

\verb+flexsurvreg(..., dist="exp")+\\
\code{dexp(..., rate=lambda)}

\[ S(t | \lambda) = \exp(-\lambda t), \qquad \lambda > 0  \]

\[
  \lambda_j = \exp(\z_j \bbeta),  \quad HR = \exp(\bbeta), \quad TAF = \exp(\bbeta) 
\]

\subsection*{Log-logistic}

\verb+flexsurvreg(..., dist="llogis")+\\
\code{dllogis(..., shape=a, scale=b)}

\[
  S(t | a, b) = 1/ (1 + (t/b)^a), \qquad a>0, b>0
\]

\[
  b_j = \exp(\z_j \bbeta), \quad TAF = \exp(-\bbeta)
\]
    
\subsection*{Log-normal}

\verb+flexsurvreg(..., dist="lnorm")+\\
\code{dlnorm(..., meanlog=mu, sdlog=sigma)}

\[
S(t | \mu, \sigma) =  1 - \int_0^t \frac{1}{x\sigma\sqrt{2 \pi}}
\exp{\left\{-\frac{(\log x - \mu)^2}{2 \sigma^2}\right\}} dx, \qquad
\sigma > 0
\] 

\[  \mu_j = z_j \bbeta , \quad TAF = \exp(-\bbeta) \]


\subsection*{Gompertz}

\verb+flexsurvreg(..., dist="gompertz")+\\
\code{dgompertz(..., shape=a, rate=b)}

\[
S(t | a, b) =   \exp(-(b/a) (\exp(at) - 1)), b > 0
\]

Note that $a<0$ is permitted, in which case $S(t|)$ tends to a
non-zero probability as $t$ increases, i.e. a probability of living forever.

\[
  b_j = \exp(\z_j \bbeta), \quad HR = \exp(\bbeta)
\]

\subsection*{Generalised gamma (Prentice)} 

\verb+flexsurvreg(..., dist="gengamma")+\\
\code{dgengamma(..., mu, sigma, Q)}

\[ S(t|\mu,\sigma,Q) =  
\begin{array}{ll}
S_G(\frac{\exp(Qw)}{Q^2} ~ | ~   \frac{1}{Q^2}, 1)  &   (Q > 0 )\\
1 - S_G(\frac{\exp(Qw)}{Q^2}  ~ |  ~  \frac{1}{Q^2}, 1)  &   (Q < 0)\\
S_L(t ~ | ~ \mu, \sigma) &  (Q = 0)\\
\end{array}
\]
where $w = (\log(t) - \mu)/\sigma$, $S_G(t | a,1)$ is the survivor function of the gamma distribution with shape $a$ and scale $1$, $S_L(t |\mu,\sigma)$ is the survivor function of the log-normal distribution with log-scale mean $\mu$ and standard deviation $\sigma$, $\mu,Q$ are  unrestricted, and $\sigma$ is positive.

\[
  \mu_j = z_j \bbeta, \quad TAF = \exp(-\bbeta)
\]

\subsection*{Generalised gamma (Stacy)}

\verb+flexsurvreg(..., dist="gengamma.orig")+\\
\code{dgengamma.orig(..., shape=b, scale=a, k=k)}
\[
S(t|a, b, k) = 1 -   \int_0^t
\frac{ b  x^{bk -1}}{   \Gamma(k) a^{bk}  }\exp(-(x/a)^b) dx
\]
\[
a_j = \exp(z_j \bbeta), \quad TAF = \exp(-\bbeta)
\]

\subsection*{Generalised F (Prentice)} 

\verb+flexsurvreg(..., dist="genf")+\\
\code{dgenf(..., mu, sigma, Q, P)}

\[ S(t | \mu, \sigma, Q, P) = 1 - \int_0^t 
  \frac{\delta (s_1/s_2)^{s_1} e^{s_1 w}}{\sigma x (1 + s_1 e^w/s_2) ^
    {(s_1 + s_2)} B(s_1, s_2)}, \qquad \sigma>0, P>0
\]

where $s_1 = 2(Q^2 + 2P + Q\delta)^{-1}$, $s_2 = 2(Q^2 + 2P -Q\delta)^{-1}$, ${\delta = (Q^2 + 2P)^{1/2}}$ and $w = (\log(x) - \mu)\delta /\sigma$


\[
  \mu_j = x_j \bbeta,  \quad TAF = \exp(-\bbeta)
\]

\subsection*{Generalised F (original)}

\verb+flexsurvreg(..., dist="genf.orig")+\\
\code{dgenf.orig(..., mu, sigma, s1, s2)}

\[
S(t | \mu, \sigma, s_1, s_2) =  1 - \int_0^t \frac{(s_1/s_2)^{s_1} e^{s_1 w}}{\sigma x (1 + s_1
  e^w/s_2) ^ {s_1 + s_2} B(s_1, s_2)} dx, \qquad \sigma>0, s_1>0, s_2>0
\]

where $w = (\log(x) - \mu)/\sigma$, and $B(s_1,s_2) =\frac{\Gamma(s_1)\Gamma(s_2)}{\Gamma(s_1+s_2)}$ is the beta function.
\[
\mu_j = z_j \bbeta ,  \quad TAF = \exp(-\bbeta)
\]

\subsection*{Spline (Royston/Parmar)}

\verb+flexsurvspline(...,scale="hazard")+\\
\verb+flexsurvspline(...,scale="odds")+\\
\verb+flexsurvspline(...,scale="normal")+\\
\code{dsurvspline(..., gamma)} where the argument \texttt{gamma} collects together
all parameters,\\
~\\
or the alternative forms for the density/distribution functions
(flexsurv versions 2.0 and later) where different parameters are in
separate arguments:\\
\code{dsurvspline0(..., gamma0, gamma1)} (no internal knots)\\
\code{dsurvspline1(..., gamma0, gamma1, gamma2)} (1 internal knot)\\
\code{dsurvspline2(..., gamma0, gamma1, gamma2, gamma3)} (2 internal knots)\\
etc., all the way up to \code{dsurvspline7}. 

\[
g(S(t)) = s(x, \bm{\gamma})
\]
where $x=\log(t)$ and $s()$ is a natural cubic spline function with $m$ internal
knots: 
\[
  s(x,\bm{\gamma}) = \gamma_0 + \gamma_1 x + \gamma_2 v_1(x) + \ldots + \gamma_{m+1} v_m(x)   
\]
where $v_j(x)$ is the $j$th \emph{basis} function,
\[v_j(x) = (x - k_j)^3_+ - \lambda_j(x - k_{min})^3_+ - (1 - \lambda_j) (x - k_{max})^3_+, 
\qquad
\lambda_j = \frac{k_{max} - k_j}{k_{max} - k_{min}} \] 
and $(x - a)_+ = max(0, x - a)$.

The link function relating the survivor function to the spline is:

\[
g(S(t)) =  \begin{array}{ll}
\log(-\log(S(t))) &\verb+(scale="hazard")+ \\
\log(S(t)^{-1} - 1)      &                  \verb+(scale="odds")+ \\
\Phi^{-1}(S(t)) &     \verb+(scale="normal")+ \\
                      \end{array}
                    \]

For more details, see the main \code{flexsurv} vignette. 

The location parameter is

\[  \gamma_{0j} = z_j \bbeta \]

For \verb+scale="hazard"+, the hazard ratio is $\exp(\bbeta)$.

\end{document}

