The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
Matthew Kay, Northwestern University
mjskay@northwestern.edu
Lisa A. Elkin, University of Washington,
lelkin@cs.washington.edu
James J. Higgins, Kansas State University,
jhiggins@ksu.edu
Jacob O. Wobbrock, University of Washington
wobbrock@uw.edu
ARTool is an R package implementing the Aligned Rank Transform for conducting nonparametric analyses of variance on factorial models. This implementation is based on the ART procedure as used in the original implementation of ARTool by Wobbrock et al.
The package automates the Aligning-and-Ranking process using the
art function. It also automates the process of running a
series of ANOVAs on the transformed data and extracting the results of
interest. It supports traditional ANOVA models (fit using
lm), repeated measures ANOVAs (fit using aov),
and mixed effects models (fit using lmer); the model used
is determined by the formula passed to art.
Note: The documentation of this package assumes some level of familiarity with when and why you may want to use the aligned rank transform; the ARTool page provides a more in-depth (and highly approachable) introduction to the aligned rank transform and the motivation for its use.
You can install the latest released version from CRAN with this R command:
install.packages("ARTool")Or, you can install the latest development version from GitHub with these R commands:
install.packages("devtools")
devtools::install_github("mjskay/ARTool")The general approach to using ART is to transform your data using
art , verify the ART procedure is appropriate to the
dataset using summary , and then run an ANOVA on the
transformed data using anova .
First, let us load some example data:
library(ARTool)
data(Higgins1990Table5, package = "ARTool")Higgins1990Table5 is a data frame from an experiment in
which the effects of Moisture and Fertilizer
on DryMatter in peat pots was tested. Four pots were placed
on each Tray , with Moisture varied between
Tray s and Fertilizer varied within
Tray s. We can see the basic structure of the data:
str(Higgins1990Table5)## 'data.frame': 48 obs. of 4 variables:
## $ Tray : Factor w/ 12 levels "t1","t2","t3",..: 1 1 1 1 2 2 2 2 3 3 ...
## $ Moisture : Factor w/ 4 levels "m1","m2","m3",..: 1 1 1 1 1 1 1 1 1 1 ...
## $ Fertilizer: Factor w/ 4 levels "f1","f2","f3",..: 1 2 3 4 1 2 3 4 1 2 ...
## $ DryMatter : num 3.3 4.3 4.5 5.8 4 4.1 6.5 7.3 1.9 3.8 ...head(Higgins1990Table5, n=8)## Tray Moisture Fertilizer DryMatter
## 1 t1 m1 f1 3.3
## 2 t1 m1 f2 4.3
## 3 t1 m1 f3 4.5
## 4 t1 m1 f4 5.8
## 5 t2 m1 f1 4.0
## 6 t2 m1 f2 4.1
## 7 t2 m1 f3 6.5
## 8 t2 m1 f4 7.3To analyze this data using the aligned rank transform, we first
transform the data using art . We specify the response
variable (DryMatter ), the fixed effects and all of their
interactions (Moisture*Fertilizer, or equivalently
Moisture + Fertilizer + Moisture:Fertilizer), and any
grouping terms if present (here, (1|Tray) ).
While (1|Tray) has no effect on the results of the
aligned rank transformation, it will be used by anova to
determine the type of model to run: when grouping terms are present,
mixed effects models are run using lmer. If you wish to use
a repeated measures ANOVA instead of a mixed effects model, you can use
an Error term instead (see below for an example of this).
If you do not having repeated measures, do not include any grouping
terms or error terms.
m <- art(DryMatter ~ Moisture*Fertilizer + (1|Tray), data=Higgins1990Table5)To verify that the ART procedure was correctly applied and is
appropriate for this dataset, we can look at the output of
summary :
summary(m)## Aligned Rank Transform of Factorial Model
##
## Call:
## art(formula = DryMatter ~ Moisture * Fertilizer + (1 | Tray),
## data = Higgins1990Table5)
##
## Column sums of aligned responses (should all be ~0):
## Moisture Fertilizer Moisture:Fertilizer
## 0 0 0
##
## F values of ANOVAs on aligned responses not of interest (should all be ~0):
## Min. 1st Qu. Median Mean 3rd Qu. Max.
## 0 0 0 0 0 0We see that the columns sums of aligned responses and the F values of ANOVAs on aligned responses not of interest are all ~0, indicating that the alignment correctly “stripped out” effects not of interest. Thus, we can apply the ANOVA on the transformed data.
ARTool automatically selects the model to be used for the ANOVA.
Because we have included a grouping term, (1|Tray), ARTool
will fit mixed effects models using lmer and run the ANOVAs
on them:
anova(m)## Analysis of Variance of Aligned Rank Transformed Data
##
## Table Type: Analysis of Deviance Table (Type III Wald F tests with Kenward-Roger df)
## Model: Mixed Effects (lmer)
## Response: art(DryMatter)
##
## F Df Df.res Pr(>F)
## 1 Moisture 23.833 3 8 0.00024199 ***
## 2 Fertilizer 122.402 3 24 1.1124e-14 ***
## 3 Moisture:Fertilizer 5.118 9 24 0.00064665 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1This particular study could also be analyzed using a repeated
measures ANOVA, yielding the same results (note that repeated measures
ANOVAs and mixed effects models will not always yield the same results).
To instead run a repeated measures ANOVA, add an Error term
to the model as you might for a call to aov:
m <- art(DryMatter ~ Moisture*Fertilizer + Error(Tray), data=Higgins1990Table5)
anova(m)## Analysis of Variance of Aligned Rank Transformed Data
##
## Table Type: Repeated Measures Analysis of Variance Table (Type I)
## Model: Repeated Measures (aov)
## Response: art(DryMatter)
##
## Error Df Df.res F value Pr(>F)
## 1 Moisture Tray 3 8 23.833 0.00024199 ***
## 2 Fertilizer Withn 3 24 122.402 1.1124e-14 ***
## 3 Moisture:Fertilizer Withn 9 24 5.118 0.00064665 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1For an example of how to run contrast tests on an art
model, see this vignette:
vignette("art-contrasts")This vignette is also available here.
Should you encounter any bugs in this package, please file it here with minimal code to reproduce the issue.
Kay, M., Elkin, L. A., Higgins, J. J., and Wobbrock, J. O. (2021). ARTool: Aligned Rank Transform for Nonparametric Factorial ANOVAs. R package version 0.11.1, https://github.com/mjskay/ARTool. DOI: 10.5281/zenodo.594511.
For the ART procedure used by art() and
anova.art(), cite:
Wobbrock, J. O., Findlater, L., Gergle, D., and Higgins, J. J. (2011). The Aligned Rank Transform for Nonparametric Factorial Analyses Using Only ANOVA Procedures. Proceedings of the ACM Conference on Human Factors in Computing Systems (CHI 2011). Vancouver, British Columbia (May 7-12, 2011). New York: ACM Press, pp. 143-146. https://depts.washington.edu/acelab/proj/art/. DOI: 10.1145/1978942.1978963.
For the ART-C contrast testing procedure used by
art.con() and artlm.con(), cite:
Elkin, L. A., Kay, M, Higgins, J. J., and Wobbrock, J. O. (2021). An Aligned Rank Transform Procedure for Multifactor Contrast Tests. Proceedings of the ACM Symposium on User Interface Software and Technology (UIST 2021). Virtual Event (October 10-14, 2021). New York: ACM Press, pp. 754-768. DOI: 10.1145/3472749.3474784
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.