The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

FuzzyResampling

The goal of FuzzyResampling, a library written in R, is to provide additional resampling procedures, apart from the classical bootstrap (i.e. Efron’s approach, see (Efron and Tibshirani 1994)), for fuzzy data. In the classical approach, secondary samples are drawing with replacement from the initial sample. Therefore most of these bootstrap samples contain repeated values. Moreover, if the size of the primary sample is small then all secondary samples consist of only a few distinct values, which is a serious disadvantage.

To overcome this problem, special resampling algorithms for fuzzy data were introduced (see (Grzegorzewski, Hryniewicz, and Romaniuk 2019, 2020a, 2020b; Grzegorzewski and Romaniuk 2022; M. Romaniuk and Hryniewicz 2019; Maciej Romaniuk and Grzegorzewski 2023)). These methods randomly create values that are “similar” to values from the initial sample, but not exactly the same. During the creation process, some of the characteristics of the initial fuzzy values are kept (e.g., the value, the width, etc.). It was shown that these algorithms provide serious advantages in some statistical areas (like standard error estimation or hypothesis testing) if they are compared with the classical approach. For detailed information concerning the theoretical foundations and practical applications of these resampling methods please see the above-mentioned references.

The initial sample (in the form of a vector or a matrix) should consist of triangular or trapezoidal fuzzy numbers.

Some additional procedures related to these resampling methods are also provided, like calculation of the Bertoluzza et al.’s distance (aka the mid/spread distance, see (Bertoluzza, Corral, and Salas 1995)), estimation of the p-value of the one-sample bootstrapped test for the mean (see (Lubiano et al. 2016)), and estimation of the standard error or the mean-squared error for the mean (see (Grzegorzewski and Romaniuk 2021)). Additionally, there are procedures which randomly generate trapezoidal fuzzy numbers using some well-known statistical distributions (see (Grzegorzewski, Hryniewicz, and Romaniuk 2020a)).

The following procedures are available in the library:

Installation

You can install the latest development version of FuzzyResampling with:

library(devtools)
install_github("mroman-ibs/FuzzyResampling")

You can install the latest stable version from CRAN with:

install.packages("FuzzyResampling")

Examples

# set seed

set.seed(12345)

# load library

library(FuzzyResampling)

# prepare some fuzzy numbers

fuzzyValues <- matrix(c(0.25,0.5,1,1.25,0.75,1,1.5,2.2,-1,0,0,2),ncol = 4,byrow = TRUE)

fuzzyValues
#>       [,1] [,2] [,3] [,4]
#> [1,]  0.25  0.5  1.0 1.25
#> [2,]  0.75  1.0  1.5 2.20
#> [3,] -1.00  0.0  0.0 2.00

# seed PRNG

set.seed(12345)

# generate the secondary sample using the classical approach

ClassicalBootstrap(fuzzyValues)
#>       [,1] [,2] [,3] [,4]
#> [1,]  0.75    1  1.5  2.2
#> [2,] -1.00    0  0.0  2.0
#> [3,]  0.75    1  1.5  2.2


# generate the secondary sample using the VA method

VAMethod(fuzzyValues)
#>            [,1]       [,2]       [,3]     [,4]
#> [1,]  0.9141124  0.9179438  1.7262290 1.747542
#> [2,] -0.5303703  0.8901852  0.9132088 1.423582
#> [3,] -0.3356065 -0.3321967 -0.3321967 2.664393


# generate the secondary sample (6 fuzzy numbers) using the d-method

DMethod(fuzzyValues, b = 6)
#>       [,1] [,2] [,3] [,4]
#> [1,]  0.75  1.0  1.5 3.50
#> [2,]  0.00  1.0  1.5 1.75
#> [3,]  0.25  0.5  1.0 1.25
#> [4,]  0.75  1.0  1.0 3.00
#> [5,] -0.25  0.0  0.5 1.20
#> [6,] -0.50  0.5  1.0 1.25


# calculate the mid/spread distance between the first value
# (from the first row) and the second one (from the second row)

BertoluzzaDistance(fuzzyValues[1,],fuzzyValues[2,])
#> [1] 0.6204837


# seed PRNG

set.seed(1234)

# calculate the p-value using the classical (i.e. Efron's) bootstrap
# for the one-sample test for the mean

OneSampleCTest(fuzzyValues, mu_0 = c(0,0.5,1,1.5))
#> [1] 0.82

# calculate the p-value using the VA resampling method

OneSampleCTest(fuzzyValues, mu_0 = c(0,0.5,1,1.5),resamplingMethod = "VAMethod")
#> [1] 0.91

# seed PRNG

set.seed(1234)

# calculate the p-value using the classical (i.e. Efron's) bootstrap
# for the two-sample test for the mean

TwoSampleCTest(fuzzyValues, fuzzyValues+0.1)
#> [1] 0.86

# calculate the p-value using the VA resampling method

TwoSampleCTest(fuzzyValues, fuzzyValues+0.1,resamplingMethod = "VAMethod")
#> [1] 0.95



# seed PRNG

set.seed(1234)

# calculate the SE of the mean using the classical (i.e. Efron's) bootstrap

SEResamplingMean(fuzzyValues)
#> $mean
#> [1] 0.0075000 0.5100000 0.8416667 1.8413333
#> 
#> $SE
#> [1] 0.05487521

# calculate the SE of the mean using the VA resampling method

SEResamplingMean(fuzzyValues, resamplingMethod = "VAMethod")
#> $mean
#> [1] -0.2846996  0.5985998  0.8490542  1.7328917
#> 
#> $SE
#> [1] 0.05504196

# calculate the MSE of the given mean using the classical (i.e. Efron's) bootstrap

SEResamplingMean(fuzzyValues, trueMean = c(0,0.5,1,2))
#> $mean
#> [1] 0.0 0.5 1.0 2.0
#> 
#> $SE
#> [1] 0.02721175

# calculate the MSE of the given mean using the VA resampling method

SEResamplingMean(fuzzyValues, resamplingMethod = "VAMethod", trueMean = c(0,0.5,1,2))
#> $mean
#> [1] 0.0 0.5 1.0 2.0
#> 
#> $SE
#> [1] 0.03119963

# seed PRNG

set.seed(1234)

# generate 10 trapezoidal fuzzy numbers using the normal and uniform distributions

GeneratorNU(10, 0,1,1,2)
#>             [,1]        [,2]        [,3]       [,4]
#>  [1,] -2.6303454 -1.52367820 -0.75097427 -0.6034145
#>  [2,] -1.3180763 -0.02526413  0.54261591  1.1619891
#>  [3,]  0.3017466  0.92539517  1.38911338  2.8236569
#>  [4,] -3.6293320 -2.38569362 -1.83839083 -0.8292990
#>  [5,] -0.4492152  0.21032515  0.61022090  0.9162188
#>  [6,] -1.3085376 -0.30454266  1.26572653  2.2735935
#>  [7,] -2.4546266 -1.10043751 -0.37349192  0.6144299
#>  [8,] -2.4312725 -1.46129002 -0.28782204  1.2145784
#>  [9,] -1.8836547 -1.39579705  0.42769842  0.7769981
#> [10,] -2.4667277 -0.93580809 -0.08268549  1.6140993


# calculate the ambiguity for the whole matrix

CalculateAmbiguity(fuzzyValues)
#> [1] 0.3333333 0.4083333 0.5000000
# help concerning the VA method

?VAMethod

References

Bertoluzza, Carlo, Norberto Corral, and Antonia Salas. 1995. “On a New Class of Distances Between Fuzzy Numbers.” Mathware and Soft Computing 2 (2): 71–84. https://eudml.org/doc/39054.
Efron, B., and R. J. Tibshirani. 1994. An Introduction to the Bootstrap. Chapman; Hall/CRC.
Grzegorzewski, P., O. Hryniewicz, and M. Romaniuk. 2019. “Flexible Bootstrap Based on the Canonical Representation of Fuzzy Numbers.” In Proceedings of EUSFLAT 2019. Atlantis Press. https://doi.org/10.2991/eusflat-19.2019.68.
———. 2020a. “Flexible Bootstrap for Fuzzy Data Based on the Canonical Representation.” International Journal of Computational Intelligence Systems 13: 1650–62. https://doi.org/10.2991/ijcis.d.201012.003.
———. 2020b. “Flexible Resampling for Fuzzy Data.” International Journal of Applied Mathematics and Computer Science 30: 281–97. https://doi.org/10.34768/amcs-2020-0022.
Grzegorzewski, P., and M. Romaniuk. 2021. “Epistemic Bootstrap for Fuzzy Data.” In Joint Proceedings of IFSA-EUSFLAT-AGOP 2021 Conferences, 538–45. Atlantis Press.
———. 2022. “Bootstrap Methods for Fuzzy Data.” In Uncertainty and Imprecision in Decision Making and Decision Support: New Advances, Challenges, and Perspectives, edited by Krassimir T. Atanassov, Vassia Atanassova, Janusz Kacprzyk, Andrzej Kałuszko, Maciej Krawczak, Jan W. Owsiński, Sotir S. Sotirov, Evdokia Sotirova, Eulalia Szmidt, and Sławomir Zadrożny, 28–47. Cham: Springer International Publishing.
Lubiano, M. A., M. Montenegro, B. Sinova, S. De la Rosa de Sáa, and M. A. Gil. 2016. “Hypothesis Testing for Means in Connection with Fuzzy Rating Scale-Based Data: Algorithms and Applications.” European Journal of Operational Research 251: 918–29. https://doi.org/10.1016/j.ejor.2015.11.016.
Romaniuk, Maciej, and Przemyslaw Grzegorzewski. 2023. “Resampling Fuzzy Numbers with Statistical Applications: FuzzyResampling Package.” The R Journal 15: 271–83. https://doi.org/10.32614/RJ-2023-036.
Romaniuk, M., and O. Hryniewicz. 2019. “Interval-Based, Nonparametric Approach for Resampling of Fuzzy Numbers.” Soft Computing 23: 5883–903. https://doi.org/10.1007/s00500-018-3251-5.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.