The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

R-CMD-check CRAN version Codecov test coverage

IxPopDyMod: A framework for Ixodidae Population Dynamics Models

This package is designed to help the user specify, run, and then visualize and analyze the results of Ixodidae (hard-bodied ticks) population dynamics models. Such models exist in the literature, but the source code to run them is not always available. We wanted to provide an easy way for these models to be written and shared.

Installation

Install the package from CRAN with:

install.packages("IxPopDyMod")

Examples

Here we provide a series of examples to help others see how models are specified and better understand the structure of the package. The examples highlight:

  1. Basic package use with a simple model configuration
  2. How tick transitions can be temperature-dependent
  3. How to include the host community into a model
  4. How to include tick-borne disease infection dynamics into a model
  5. How to include host-host density dependent tick mortality

These examples all use and modify preset model configurations. If you wish to create a custom model configuration, see ?config().

Simple example

We start with config_ex_1, a simple model configuration that doesn’t consider infection, and that has four life stages: egg, larva, nymph, and adult. This config is already loaded with the package, but as an example here is how the config is specified in R.

# library(IxPopDyMod)
devtools::load_all()
config_ex_1 <- config(
  cycle = life_cycle(
    transition("egg", "larva", function(a) a, transition_type = "probability", parameters = c(a = 1)),
    transition("egg", NULL, function(a) a, transition_type = "probability", mortality_type = "per_day", parameters = c(a = 0)),
    transition("larva", "nymph", function(a) a, transition_type = "probability", parameters = c(a = 0.01)),
    transition("larva", NULL, function(a) a, transition_type = "probability", mortality_type = "per_day", parameters = c(a = 0.99)),
    transition("nymph", "adult", function(a) a, transition_type = "probability", parameters = c(a = 0.1)),
    transition("nymph", NULL, function(a) a, transition_type = "probability", mortality_type = "per_day", parameters = c(a = 0.9)),
    transition("adult", "egg", function(a) a, transition_type = "probability", parameters = c(a = 1000)),
    transition("adult", NULL, function(a) a, transition_type = "probability", mortality_type = "per_day", parameters = c(a = 0))
  ),
  initial_population = c("adult" = 1000),
  steps = 29L
)

Here each transition is a probability rather than duration (see below) and there are not predictors (like temperature or the host community). All eggs hatch to larvae, 1% of larvae make it to nymphs, 10% of nymphs become adults, and than each adult lays 1000 eggs. The model starts with 1000 adults and runs for 29 time steps.

Vary a parameter in the model

We give a new range of parameter values for number of eggs laid.

cfg1 <- config_ex_1
cfg2 <- config_ex_1
cfg3 <- config_ex_1

cfg1$cycle[[7]]$parameters[['a']] <- 800
cfg2$cycle[[7]]$parameters[['a']] <- 1000
cfg3$cycle[[7]]$parameters[['a']] <- 1200

modified_configs <- list(cfg1, cfg2, cfg3)

This gives us a list of three modified model configs, which differ only in the number of eggs laid.

Run the model with each new parameter value

outputs <- lapply(modified_configs, run)

The model output is a data frame where the column day indicates Julian date, stage indicates tick life stage, and pop is population size.

Calculate growth rate for each of the model outputs

sapply(outputs, growth_rate)
#> [1] 0.9457416 1.0000000 1.0466351

growth_rate() calculates the multiplicative growth rate for a model output. The population is stable with 1000 eggs laid, as indicated by the growth rate 1. The population decreases with 800 eggs laid, and increases with 1200 eggs laid.

Temperature-dependent transitions

temp_example_config$cycle
#> ** A life cycle
#> ** Number of transitions: 15
#> ** Unique life stages: __e, q_l, e_l, q_n, e_n, q_a, e_a, r_a
#> 1. __e -> q_l 
#> 2. __e -> mortality 
#> 3. q_l -> e_l 
#> 4. q_l -> mortality 
#> 5. e_l -> q_n 
#> 6. e_l -> mortality 
#> 7. q_n -> e_n 
#> 8. q_n -> mortality 
#> 9. e_n -> q_a 
#> 10. e_n -> mortality 
#> ... and 5 more transitions

Calling the life_cycle element in a config gives a summary of the life cycle. Here we see the life stages, how many transitions between life stages there are, and the first 10 transitions are shown. Each transition is stored in the life_cycle as a list, so they can be called using list indexing.

temp_example_config$cycle[[1]]
#> ** A transition
#> ** __e -> q_l 
#> Transition type: duration
#> Predictors: x = list(pred = "temp", first_day_only = FALSE)
#> Parameters: a = 2.92e-05, b = 2.27
#> Function: (x, a, b) ifelse(x > 0, a * x^b, 0)

Here is the first transition from __e, eggs, to q_l, questing larvae. This transition is a duration, so we interpret the output as the rate at which it happens on the probability with which it happens. It has a predictor, temperature. So the time to transition from egg to questing larva is a temperature dependent function. The parameters and function show this rate is 2.92e-05 * temp^2.27.

Compare two temperature scenarios

Here we highlight how this temperature dependence affects the output of the model. We make a second config in which the daily temperature is one degree warmer.

output <- run(temp_example_config)

# Predictor data for this example config is the temperature data from the Ogden config
# (host density data is dropped).
temp_pred2 <- readr::read_csv("./data-raw/ogden2005/predictors.csv") %>% dplyr::filter(pred == "temp")

temp_pred2$value <- temp_pred2$value + 1

temp_example_config2 <- temp_example_config
temp_example_config2$preds <- temp_pred2

output2 <- run(temp_example_config2)

Finally, we compare the outputs for a commonly measured aspect of tick populations, the number of questing nymphs.

output_qn <- subset(output, stage == 'q_n')
output2_qn <- subset(output2, stage == 'q_n')

plot(output2_qn$day, output2_qn$pop, type = 'l', col = 'red', lwd = 2, xlab = 'Day', ylab='Questing nymphs')
lines(output_qn$day, output_qn$pop, type = 'l', col = 'blue', lwd = 2)

Here you can see nymphs start questing earlier and reach a higher population in the warmer climate.

Host community

In the previous example there was no host community explicitly stated and ticks had a constant probability of transition between life stages (e.g., from larva to nymph). It is possible to instead model these probabilities based on host community composition. Here transition from questing larvae, q_l, to engorged larvae, e_l, depends on the host_den, which is how the host community is included in the transition.

host_example_config$cycle[[3]]
#> ** A transition
#> ** q_l -> e_l 
#> Transition type: probability
#> Predictors: x = list(pred = "host_den", first_day_only = TRUE)
#> Parameters: a = 0.01, pref = c(deer = 0.25, mouse = 1, squirrel = 0.25), feed_success = c(deer = 0.49, mouse = 0.49, squirrel = 0.17)
#> Function: (x, a, pref, feed_success) {    if (length(pref)%%length(x) != 0) {        print(paste("error in find_n_feed, x:", length(x), "pref:",             length(pref)))    }    (1 - (1 - a)^(sum(x * pref)/sum(pref))) * sum(x * pref *         feed_success/sum(x * pref))}

This transition from questing larvae to engorged larvae depends on host_den, host densities. Here some parameters in the transition function have different values for each host species. Here pref is larval preference for different host species and feed_success is the probability an attached larva feeds to completion on each host species.

In this example the temperature and host community are constant through time, but the package also supports variable temperature and host community data to see how seasonal or year-to-year variation in affects tick populations.

Compare host communities of different densities

We now compare how different host densities affect tick populations. Here we vary the deer density.

cfg_lowdeer <- host_example_config
cfg_highdeer <- host_example_config

cfg_lowdeer$preds$value[cfg_lowdeer$preds$pred_subcategory == 'deer'] <- 0.1
cfg_highdeer$preds$value[cfg_highdeer$preds$pred_subcategory == 'deer'] <- 5

output_lowdeer <- run(cfg_lowdeer)
output_middeer <- run(host_example_config)
output_highdeer <- run(cfg_highdeer)

output_lowdeer_qn <- subset(output_lowdeer, stage == 'q_n')
output_middeer_qn <- subset(output_middeer, stage == 'q_n')
output_highdeer_qn <- subset(output_highdeer, stage == 'q_n')


plot(output_highdeer_qn$day, log10(output_highdeer_qn$pop), type = 'l', lwd = 2, col = '#1b9e77', yaxt = 'n', ylab ='Questing nymphs', xlab = 'Day', ylim = c(2,5))
lines(output_middeer_qn$day, log10(output_middeer_qn$pop), col = '#d95f02', lwd = 2)
lines(output_lowdeer_qn$day, log10(output_lowdeer_qn$pop), col = '#7570b3', lwd = 2)
text(x = 25, y = c(4.25,4,3.75), labels = c('High deer den.', 'Mid deer den.', 'Low deer den.'), col = c('#1b9e77', '#d95f02', '#7570b3'))
axis(side = 2, at = 2:5, labels = c(expression(10^2),expression(10^3),expression(10^4),expression(10^5)))

Tick-borne pathogen infection dynamics

In the examples above we modeled a tick population without a tick-borne pathogen Here we give an example of how the package can be used to also include infection dynamics.

So far all examples have used transition functions loaded into the package, here we show how to define our own.

find_host <- function(x, y, a, pref) {
  1 - (1 - a)^sum(x * pref)
}
infect_example_config$cycle
#> ** A life cycle
#> ** Number of transitions: 33
#> ** Unique life stages: __e, q_l, f_l, eil, eul, qin, qun, fun, fin, ein, eun, qia, qua, fua, fia, eia, eua, r_a
#> 1. __e -> q_l 
#> 2. __e -> mortality 
#> 3. q_l -> f_l 
#> 4. q_l -> mortality 
#> 5. f_l -> eil 
#> 6. f_l -> eul 
#> 7. eil -> qin 
#> 8. eil -> mortality 
#> 9. eul -> qun 
#> 10. eul -> mortality 
#> ... and 23 more transitions

Here we use the middle character of the life-stage key. It is either i for infected or u for uninfected. We assume no transovarial infection so questing larvae are uninfected. But after they feed, f_l, they can either become engorged infected, eil, or engorged uninfected, eul, larvae. This is based on infect_fun, which as above has host species-specific parameters of pref and host_rc (reservoir competence).

Effect of deer density

Deer are important to the blacklegged tick as the main host of adult ticks. As such they are thought to increase tick populations (see above). But deer can also serve as hosts for juvenile tick life stages, and deer are poor reservoirs for Borrelia burgdorferi. So increased deer density may also decrease the proportion of bloodmeals juvenile ticks take from more competent reservoirs life mice. We use this simple model to illustrate this possibility.

deer_den <- c(0.1, 0.25, 0.5, 0.75, 1)
results_df <- data.frame(deer = deer_den, nymph_den = 0, nip = 0)

for (i in 1:5)
{
  cfg_mod <- infect_example_config
  cfg_mod$preds[1, 4] <- deer_den[i]
  out <- run(cfg_mod)



  results_df$nip[i] <- sum(out[out$stage=='qin','pop'])/(sum(out[out$stage=='qin','pop']) + sum(out[out$stage=='qun','pop']))

  results_df$nymph_den[i] <- sum(out[out$stage=='qin','pop']) + sum(out[out$stage=='qun','pop'])
}

plot(results_df$deer,results_df$nymph_den, xlab = 'Deer density', ylab = 'Number of questing nymphs')


plot(results_df$deer,results_df$nip, xlab = 'Deer density', ylab = 'Nymph infection rate')

Here we see that as deer density increases the number of nymphs increases, but the nymph infection prevalence (NIP) goes down.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.