The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

Exploratory and Descriptive Statistics and Plots

To start, load the package.

library(JWileymisc)
library(ggplot2)
library(data.table)

Descriptive Statistics

The egltable() function calculates basic descriptive statistics.


egltable(c("mpg", "hp", "qsec", "wt", "vs"),
         data = mtcars)
Example descriptive statistics table.
  M (SD)
mpg 20.09 (6.03)
hp 146.69 (68.56)
qsec 17.85 (1.79)
wt 3.22 (0.98)
vs 0.44 (0.50)

The strict argument can be used if variables are categorical but are not coded as factors. In this case, vs has two levels: 0 and 1 and the frequency and percentage of each are shown instead of the mean and standard deviation.


egltable(c("mpg", "hp", "qsec", "wt", "vs"),
         data = mtcars, strict=FALSE)
Example descriptive statistics table with automatic categorical variables.
  M (SD)/N (%)
mpg 20.09 (6.03)
hp 146.69 (68.56)
qsec 17.85 (1.79)
wt 3.22 (0.98)
vs
0 18 (56.2%)
1 14 (43.8%)

egltable() also allows descriptive statistics to be broken down by another variable by using the g argument. This not only separates results by group but also calculates bivariate tests of the differences between groups and effect sizes. For example, t-tests for continuous variables and two groups or chi-square tests for categorical variables. For more than two groups, ANOVAs are used.


egltable(c("mpg", "hp", "qsec", "wt", "vs"), 
  g = "am", data = mtcars, strict = FALSE)
Example descriptive statistics table by group.
  0 M (SD)/N (%) 1 M (SD)/N (%) Test
mpg 17.15 (3.83) 24.39 (6.17) t(df=30) = -4.11, p < .001, d = 1.48
hp 160.26 (53.91) 126.85 (84.06) t(df=30) = 1.37, p = .180, d = 0.49
qsec 18.18 (1.75) 17.36 (1.79) t(df=30) = 1.29, p = .206, d = 0.47
wt 3.77 (0.78) 2.41 (0.62) t(df=30) = 5.26, p < .001, d = 1.89
vs Chi-square = 0.91, df = 1, p = .341, Phi = 0.17
0 12 (63.2%) 6 (46.2%)
1 7 (36.8%) 7 (53.8%)

For very skewed continuous variables, non-parametric statistics and tests may be more appropriate. These can be generated using the parametric argument. For chi-square tests with small cell sizes, simulated p-values also can be generated.


egltable(c("mpg", "hp", "qsec", "wt", "vs"), 
         g = "am", data = mtcars, strict = FALSE,
         parametric = FALSE)
Example descriptive statistics table by group.
  0 Mdn (IQR)/N (%) 1 Mdn (IQR)/N (%) Test
mpg 17.30 (4.25) 22.80 (9.40) KW chi-square = 9.79, df = 1, p = .002
hp 175.00 (76.00) 109.00 (47.00) KW chi-square = 4.07, df = 1, p = .044
qsec 17.82 (2.00) 17.02 (2.15) KW chi-square = 1.28, df = 1, p = .258
wt 3.52 (0.41) 2.32 (0.84) KW chi-square = 16.87, df = 1, p < .001
vs Chi-square = 0.91, df = 1, p = .341, Phi = 0.17
0 12 (63.2%) 6 (46.2%)
1 7 (36.8%) 7 (53.8%)

Paired Data

We have already seen how to compare descriptives across groups when the groups were independent. egltable() also supports using groups to test paired samples. To use this, the variable passed to the grouping argument, g must have exactly two levels and you must also pass a variable that is a unique ID per unit and specify paired = TRUE.

By default for continuous, paired data, mean and standard deviations are presented and a paired samples t-test is used. A pseudo Cohen’s d effect size is calculated as the mean of the change score divided by the standard deviation of the change score. If there are missing data, its possible that the mean difference will be different than the difference in means as the means are calculated on all available data, but the effect size can only be calculated on complete cases.

## example with paired data
egltable(
  vars = "extra",
  g = "group",
  data = sleep,
  idvar = "ID",
  paired = TRUE)
Example parametric descriptive statistics for paired data.
  1 M (SD) 2 M (SD) Test
extra 0.75 (1.79) 2.33 (2.00) t(df=9) = 4.06, p = .003, d = 1.28

If we do not want to make parametric assumptions with continuous variables, we can set parametric = FALSE. In this case the descriptives are medians and a paired Wilcoxon test is used. In this dataset there are ties and a warning is generated about ties and zeroes. This warning is generally ignorable, but if these were central hypothesis tests, it may warrant further testing using, for example, simulations which are more precise in the case of ties.

egltable(
  vars = "extra",
  g = "group",
  data = sleep,
  idvar = "ID",
  paired = TRUE,
  parametric = FALSE)
#> Warning in wilcox.test.default(widedat$dv2, widedat$dv1, paired = TRUE): cannot
#> compute exact p-value with ties
#> Warning in wilcox.test.default(widedat$dv2, widedat$dv1, paired = TRUE): cannot
#> compute exact p-value with zeroes
Example non parametric descriptive statistics for paired data.
  1 Mdn (IQR) 2 Mdn (IQR) Test
extra 0.35 (1.88) 1.75 (3.28) Wilcoxon Paired V = 45.00, p = .009

We can also work with categorical paired data. The following code creates a categorical variable, the tertiles of chick weights measured over time. The chick weight dataset has many time points, but we will just use two.


## paired categorical data example
## using data on chick weights to create categorical data
tmp <- subset(ChickWeight, Time %in% c(0, 20))
tmp$WeightTertile <- cut(tmp$weight,
  breaks = quantile(tmp$weight, c(0, 1/3, 2/3, 1), na.rm = TRUE),
  include.lowest = TRUE)

No special code is needed to work with categorical variables. egltable() recognises categorical variables and uses McNemar’s test, which is a chi-square of the off diagonals, which tests whether people (or chicks in this case) change groups equally over time or preferentially move one direction. In this case, a significant result suggests that over time chicks’ weights change preferentially one way and the descriptive statistics show us that there is an increase in weight tertile from time 0 to time 20.

egltable(c("weight", "WeightTertile"), g = "Time",
  data = tmp,
  idvar = "Chick", paired = TRUE)
Continuous and categorical paired data.
  0 M (SD)/N (%) 20 M (SD)/N (%) Test
weight 41.06 (1.13) 209.72 (66.51) t(df=45) = 17.10, p < .001, d = 2.52
WeightTertile McNemar’s Chi-square = 39.00, df = 3, p < .001
[39,41.7] 32 (64.0%) 0 (0.0%)
(41.7,169] 18 (36.0%) 14 (30.4%)
(169,361] 0 (0.0%) 32 (69.6%)

Correlation Summaries

For continuous variables, correlation matrices are commonly examined. This is especially true for structural equation models or path analyses.

The SEMSummary() function provides a simple way to generate these under various options. There is a formula interface, similar to lm() or other regression models. Missing data can be handled using listwise deletion, pairwise present data, or full information maximum likelihood (FIML). When assumptions are met, FIML is less biased and uses all available data, and is the default.


m <- SEMSummary(~ mpg + hp + qsec + wt, data = mtcars)

corTab <- APAStyler(m, type = "cor", stars = TRUE)
#>         N  M      SD    1.  2.       3.       4.      
#> 1. mpg  32  20.09  6.03  -  -0.78***  0.42*   -0.87***
#> 2. hp   32 146.69 68.56      -       -0.71***  0.66***
#> 3. qsec 32  17.85  1.79               -       -0.17   
#> 4. wt   32   3.22  0.98                        -      
#> 
#> Percentage of coverage for each pairwise covariance or correlation
#> 
#>      mpg hp qsec wt
#> mpg  1   1  1    1 
#> hp       1  1    1 
#> qsec        1    1 
#> wt               1

These correlations can be nicely formatted into a table.

Example correlation table.
  N M SD 1. 2. 3. 4.
1. mpg 32 20.09 6.03 - -0.78*** 0.42* -0.87***
2. hp 32 146.69 68.56 - -0.71*** 0.66***
3. qsec 32 17.85 1.79 - -0.17
4. wt 32 3.22 0.98 -

Plot methods exist for SEMSummary() objects. By default, above the diagonal are correlations and below the diagonal are p-values. However, the type argument can be set (see ?corplot) to get all values to be either correlations or p-values. By default, another useful feature is that hierarchical clustering is used to group similar variables together in clusters, provided a more useful sorting of the data than many “default” correlation matrices. If a specific order is desired, you can use the order = "asis" option to keep the variable order the same as written in SEMSummary().


plot(m) +
  ggtitle("Order by hierarchical clustering")


plot(m, order = "asis") +
  ggtitle("Order as written")


plot(m, type = "p") +
  ggtitle("Numbers are p-values")

Grouped Correlations

Correlations also can be broken down by group. Here results are separated by species which are automaticaly used as the title of each graph.


mg <- SEMSummary(~ Sepal.Length + Petal.Length +
                  Sepal.Width + Petal.Width | Species,
                 data = iris)

plot(mg)
#> $`1`

#> 
#> $`2`

#> 
#> attr(,"class")
#> [1] "list"      "ggarrange"

Likert Scale Plots

In much of psychological and consumer/market research, likert rating scales are used. For example, rating a question/item from “Strongly DISagree” to “Strongly Agree” or rating satisfaction from “Not at all” to “Very Satisfied” or adjectives that capture mood/affect from “Not at all” to “Extremely”. Likert plots aim to show these results clearly and aid interpretation by presenting the anchors as well.

The following code creates some simulated data, summarizes it, adds the necessary labels/anchors, and creates a nice plot.


## simulate some likert style data
set.seed(1234)
d <- data.table(
  Happy = sample(1:5, 200, TRUE, c(.1, .2, .4, .2, .1)),
  Cheerful = sample(1:5, 200, TRUE, c(.1, .2, .2, .4, .1)),
  Peaceful = sample(1:5, 200, TRUE, c(.1, .1, .2, .4, .2)),
  Sad = sample(1:5, 200, TRUE, c(.1, .3, .3, .2, .1)),
  Hopeless = sample(1:5, 200, TRUE, c(.3, .3, .2, .2, 0)),  
  Angry = sample(1:5, 200, TRUE, c(.4, .3, .2, .08, .02)))

dmeans <- melt(d, measure.vars = names(d))[,
  .(Mean = mean(value, na.rm = TRUE)), by = variable]

dmeans[, Low := paste0(variable, "\nNot at all")]
dmeans[, High := paste0(variable, "\nExtremely")]
dmeans[, variable := as.integer(factor(variable))]

## view the summarised data
print(dmeans)
#>    variable  Mean                  Low                High
#> 1:        1 2.945    Happy\nNot at all    Happy\nExtremely
#> 2:        2 3.060 Cheerful\nNot at all Cheerful\nExtremely
#> 3:        3 3.555 Peaceful\nNot at all Peaceful\nExtremely
#> 4:        4 2.870      Sad\nNot at all      Sad\nExtremely
#> 5:        5 2.280 Hopeless\nNot at all Hopeless\nExtremely
#> 6:        6 1.880    Angry\nNot at all    Angry\nExtremely

gglikert("Mean", "variable", "Low", "High", data = dmeans,
         xlim = c(1, 5),
         title = "Average Affect Ratings")


## create a grouping variable
dg <- cbind(d, Group = ifelse(
                 d$Happy > mean(d$Happy, na.rm = TRUE),
                 "General Population", "Depressed"))

dgmeans <- melt(dg, measure.vars = names(d), id.vars = "Group")[,
  .(Mean = mean(value, na.rm = TRUE)), by = .(variable, Group)]

dgmeans[, Low := paste0(variable, "\nNot at all")]
dgmeans[, High := paste0(variable, "\nExtremely")]
dgmeans[, variable := as.integer(factor(variable))]

## view the summarised data
print(dgmeans)
#>     variable              Group     Mean                  Low
#>  1:        1 General Population 3.510791    Happy\nNot at all
#>  2:        1          Depressed 1.655738    Happy\nNot at all
#>  3:        2 General Population 3.043165 Cheerful\nNot at all
#>  4:        2          Depressed 3.098361 Cheerful\nNot at all
#>  5:        3 General Population 3.633094 Peaceful\nNot at all
#>  6:        3          Depressed 3.377049 Peaceful\nNot at all
#>  7:        4 General Population 2.906475      Sad\nNot at all
#>  8:        4          Depressed 2.786885      Sad\nNot at all
#>  9:        5 General Population 2.309353 Hopeless\nNot at all
#> 10:        5          Depressed 2.213115 Hopeless\nNot at all
#> 11:        6 General Population 1.834532    Angry\nNot at all
#> 12:        6          Depressed 1.983607    Angry\nNot at all
#>                    High
#>  1:    Happy\nExtremely
#>  2:    Happy\nExtremely
#>  3: Cheerful\nExtremely
#>  4: Cheerful\nExtremely
#>  5: Peaceful\nExtremely
#>  6: Peaceful\nExtremely
#>  7:      Sad\nExtremely
#>  8:      Sad\nExtremely
#>  9: Hopeless\nExtremely
#> 10: Hopeless\nExtremely
#> 11:    Angry\nExtremely
#> 12:    Angry\nExtremely

gglikert("Mean", "variable", "Low", "High",
         colour = "Group",
         data = dgmeans,
         xlim = c(1, 5),
         title = "Average Affect Ratings") +
  scale_colour_manual(
    values = c("Depressed" = "black",
               "General Population" = "grey70"))

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.