NGLVieweR

The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

NGLVieweR

Installation

NGLVieweR is available through GitHub

install.packages("remotes")
remotes::install_github("nvelden/NGLVieweR")

Loading PDB files

You can load a PDB (or and other supported format) directly or use a PDB code of a structure on RCSB.org. The below minimal example loads the PDB file and displays the structure in a “cartoon” representation.

#Load local pdb file
NGLVieweR("C:/7CID.pdb") %>%
addRepresentation("cartoon")
#Load protein by PDB code
NGLVieweR("7CID") %>%
addRepresentation("cartoon")

Note: Use mouse for selection (left-click), rotate/move (left/right-click hold) and zooming (scroll wheel).

You can view a “basic” NGLVieweR Shiny application by running the below code. Use “API” for an example using API calls or any of the function names (e.g “addSelection”") for function specific examples.

library(NGLVieweR)
library(shiny)
NGLVieweR_example("basic")

Loading other structural files

This package has been developed and tested using PDB files but supports loading of any of the following structural files: .mmcif, .cif, .mcif, .ent, .pqr, .gro, .sdf, .sd, .mol2 and .mmtf.

By default NGLVieweR guesses the file format from the file extension. Use the format parameter in case no or the wrong file extension is provided.

#Note that line formatting needs to be exact when reading from console!
benz <- "
702
  -OEChem-02271511112D
  9  8  0     0  0  0  0  0  0999 V2000
    0.5369    0.9749    0.0000 O   0  0  0  0  0  0  0  0  0  0  0  0
    1.4030    0.4749    0.0000 C   0  0  0  0  0  0  0  0  0  0  0  0
    2.2690    0.9749    0.0000 C   0  0  0  0  0  0  0  0  0  0  0  0
    1.8015    0.0000    0.0000 H   0  0  0  0  0  0  0  0  0  0  0  0
    1.0044    0.0000    0.0000 H   0  0  0  0  0  0  0  0  0  0  0  0
    1.9590    1.5118    0.0000 H   0  0  0  0  0  0  0  0  0  0  0  0
    2.8059    1.2849    0.0000 H   0  0  0  0  0  0  0  0  0  0  0  0
    2.5790    0.4380    0.0000 H   0  0  0  0  0  0  0  0  0  0  0  0
    0.0000    0.6649    0.0000 H   0  0  0  0  0  0  0  0  0  0  0  0
  1  2  1  0  0  0  0
  1  9  1  0  0  0  0
  2  3  1  0  0  0  0
  2  4  1  0  0  0  0
  2  5  1  0  0  0  0
  3  6  1  0  0  0  0
  3  7  1  0  0  0  0
  3  8  1  0  0  0  0
M  END
> <ID>
00001
> <DESCRIPTION>
Solvent produced by yeast-based fermentation of sugars.
$$$$
"
NGLVieweR(benz, format="sdf") %>%
  addRepresentation("ball+stick")

Representations

You can load the structure as a “cartoon”, “ball+stick”, “line”, “surface”, “ribbon”, or any other representation listed in the NGL.js manual under “StructureRepresentation”. Multiple representations of the same structure can be overlaid by chaining the addSelection() function. Also see the “structure” tab in the demo app for a list of possible representations.

NGLVieweR("7CID") %>%
addRepresentation("cartoon") %>%
addRepresentation("ball+stick")

You can alter the appearance of select residues using the param argument. For a full list of options see the NGL.js “RepresentationParameters” and the “Selection language” section.

NGLVieweR("7CID") %>%
  addRepresentation("cartoon",
    param = list(colorScheme = "residueindex")
  ) %>%
  addRepresentation("ball+stick",
    param = list(
      sele = "233-248",
      colorValue = "red",
      colorScheme = "element"
    )
  ) %>%
  addRepresentation("surface",
    param = list(
      colorValue = "white",
      opacity = 0.1
    )
  )

Stage

You can alter the background color or set the zoom or rotation speed using the stageParameters() function. For a full list of options, see the “StageParameters” method in the official NGL.js manual. In additions there are specific functions to set:

Animation: setRock() or setSpin()
Focus: setFocus()
Quality: setQuality()

Note: Changes in background color are not visible in the RStudio viewer.

NGLVieweR("7CID") %>%
  stageParameters(backgroundColor = "white", zoomSpeed = 1) %>%
  addRepresentation("cartoon",
    param = list(name = "cartoon", colorScheme = "residueindex")
  ) %>%
  setSpin()

Labels

Labels can be added by setting the addRepresentation() type parameter to “label”. For a full list of of options, see the LabelRepresentationParameters section in the NGL.js manual. Also see the “label” tab in the demo app for possible label settings.

NGLVieweR("7CID") %>%
  addRepresentation("cartoon") %>%
  addRepresentation("ball+stick", param = list(
    colorScheme = "element",
    colorValue = "yellow",
    sele = "20"
  )) %>%
  addRepresentation("label",
    param = list(
      sele = "20",
      labelType = "format",
      labelFormat = "[%(resname)s]%(resno)s", # or enter custom text
      labelGrouping = "residue", # or "atom" (eg. sele = "20:A.CB")
      color = "white",
      fontFamiliy = "sans-serif",
      xOffset = 1,
      yOffset = 0,
      zOffset = 0,
      fixedSize = TRUE,
      radiusType = 1,
      radiusSize = 1.5, # Label size
      showBackground = FALSE
      # backgroundColor="black",
      # backgroundOpacity=0.5
    )
  )

Zoom

You can zoom into specific residues using the ZoomMove() function.

NGLVieweR("7CID") %>%
  addRepresentation("cartoon") %>%
  addRepresentation("ball+stick",
    param = list(
      colorScheme = "element",
      colorValue = "yellow",
      sele = "20"
    )
  ) %>%
  addRepresentation("label",
    param = list(
      sele = "20",
      labelType = "format",
      labelFormat = "[%(resname)s]%(resno)s", # or enter custom text
      labelGrouping = "residue", # or "atom" (eg. sele = "20:A.CB")
      color = "white",
      xOffset = 1,
      fixedSize = TRUE,
      radiusType = 1,
      radiusSize = 1.5
    ) # Label size
  ) %>%
  zoomMove(
    center = "20",
    zoom = "20",
    duration = 0, # animation time in ms
    z_offSet = -20
  )

Contact

Contacts between residues can be added by setting the addRepresentation() type parameter to “contact”. Using the sele parameter contacts for specific residues can be selected. The filterSele parameter can be used to only show contacts between two selections. In the below example Biotin and residues 23, 27, 43, 45, and 128 are selected sele="5001 or 23 or 27 or 43 or 45 or 128" and contacts are only shown between the residues and biotin filterSele=list("23 or 27 or 43 or 45 or 128", "5001"). This prevents the display of contacts between residues or water molecules.

NGLVieweR("3RY2") %>%
  addRepresentation("cartoon") %>%
  addRepresentation("ball+stick",
    param = list(
      name = "biotin",
      colorvalue = "grey",
      colorScheme = "element",
      sele = "5001"
    )
  ) %>%
  addRepresentation("ball+stick",
    param = list(
      name = "interacting",
      colorScheme = "element",
      colorValue = "green",
      sele = "23 or 27 or 43 or 45 or 128"
    )
  ) %>%
  zoomMove(
    center = "27:B",
    zoom = "27:B",
    z_offSet = -20
  ) %>%
  addRepresentation("contact",
    param = list(
      name = "contact",
      sele = "5001 or 23 or 27 or 43 or 45 or 128",
      filterSele = list("23 or 27 or 45 or 128", "5001"),
      labelVisible = TRUE,
      labelFixedSize = FALSE,
      labelUnit = "angstrom", # "", "angstrom", "nm"
      labelSize = 2
      # hydrogenBond=TRUE,
      # weakHydrogenBond=FALSE,
      # waterHydrogenBond=FALSE,
      # backboneHydrogenBond=TRUE,
      # hydrophobic=FALSE,
      # halogenBond=TRUE,
      # ionicInteraction=TRUE,
      # metalCoordination=TRUE,
      # cationPi=TRUE,
      # piStacking=TRUE,
      # maxHydrophobicDist= 4.0,
      # maxHbondDist= 3.5,
      # maxHbondSulfurDist= 4.1,
      # maxHbondAccAngle= 45,
      # maxHbondDonAngle= 45,
      # maxHbondAccPlaneAngle= 90,
      # maxHbondDonPlaneAngle= 30,
      # maxPiStackingDist= 5.5,
      # maxPiStackingOffset= 2.0,
      # maxPiStackingAngle= 30,
      # maxCationPiDist= 6.0,
      # maxCationPiOffset= 2.0,
      # maxIonicDist= 5.0,
      # maxHalogenBondDist= 3.5,
      # maxHalogenBondAngle= 30,
      # maxMetalDist= 3.0,
      # refineSaltBridges= TRUE,
      # masterModelIndex= -1,
      # lineOfSightDistFactor= 1
    )
  )

Shiny

The NGLVieweROutput() and renderNGLVieweR() functions enable you to visualize PDB files within Shiny applications. See the NGLVieweR_example("basic") and “API” for live examples.

library(shiny)
library(NGLVieweR)
ui <- fluidPage(NGLVieweROutput("structure"))
server <- function(input, output) {
  output$structure <- renderNGLVieweR({
    NGLVieweR("7CID") %>%
      addRepresentation("cartoon",
        param = list(
          name = "cartoon", color =
            "residueindex"
        )
      ) %>%
      addRepresentation("ball+stick",
        param = list(
          name = "cartoon",
          sele = "1-20",
          colorScheme = "element"
        )
      ) %>%
      stageParameters(backgroundColor = "black") %>%
      setQuality("high") %>%
      setFocus(0) %>%
      setSpin(TRUE)
  })
}
shinyApp(ui, server)

API

In Shiny apps, you can manipulate the NGLVieweR widget after creation using specific “API” calls. You can for instance add or remove representations by referring to their name using the addSelection() or removeSelection() functions.

library(shiny)
library(NGLVieweR)
ui <- fluidPage(
  titlePanel("Viewer with API inputs"),
  sidebarLayout(
    sidebarPanel(
      textInput("selection", "Selection", "1-20"),
      selectInput("type", "Type", c("ball+stick", "cartoon", "backbone")),
      selectInput("color", "Color", c("orange", "grey", "white")),
      actionButton("add", "Add"),
      actionButton("remove", "Remove")
    ),
    mainPanel(
      NGLVieweROutput("structure")
    )
  )
)
server <- function(input, output) {
  output$structure <- renderNGLVieweR({
    NGLVieweR("7CID") %>%
      addRepresentation("cartoon",
        param = list(name = "cartoon", colorScheme = "residueindex")
      ) %>%
      stageParameters(backgroundColor = input$backgroundColor) %>%
      setQuality("high") %>%
      setFocus(0) %>%
      setSpin(TRUE)
  })
  observeEvent(input$add, {
    NGLVieweR_proxy("structure") %>%
      addSelection(isolate(input$type),
        param =
          list(
            name = "sel1",
            sele = isolate(input$selection),
            colorValue = isolate(input$color)
          )
      )
  })
  observeEvent(input$remove, {
    NGLVieweR_proxy("structure") %>%
      removeSelection("sel1")
  })
}
shinyApp(ui, server)

Possible API functions are:

addSelection()
removeSelection()
snapShot()
updateColor()
updateFocus()
updateFullscreen()
updateRepresentation()
updateRock()
updateSelection()
updateSpin()
updateStage()
updateVisibility()
updateZoomMove()

Retrieving data from the widget

In a Shiny application one can retrieve information from the widget as inputs based on the NGLVieweR outputID. Suppose the outputID is “structure”, then the following information can be retrieved:

input$structure_selection - Get details on the clicked residue.
input$structure_sequence - will return the sequence of the PDB file as a character vector.
input$structure_resno - will return all the sequence numbers as a numeric vector.
input$structure_chainname - will return the chainname of each amino acid as a character vector,
input$structure_rendering - will return TRUE if the widget is loading or FALSE when completed.
input$structure_PDB - will return the PDB file as a text string.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.