The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
SADISA contains three user-level functions, SADISA_loglik, SADISA_ML and SADISA_test. SADISA_loglik calculates the loglikelihood (sampling formula) of a set of abundances given a mainland-island community model, i.e. a model for the mainland (metacommunity) and the island (local community) that is connected to it via dispersal, and SADISA_ML finds the parameters that maximizes that loglikelihood. Tests that replicate the analyses in Haegema & Etienne (2016) are provided in SADISA_test. The model makes the Independent-Species (IS) assumption, and therefore differs from the sampling formulae that have been derived within the context of neutral theory, which all assume that individuals of species interact, but all in the same way (zero-sum constraint). Mathematically, the sampling formula is different, but in many cases the loglikelihood is practically indistinguishable from that obtained earlier, and so are the maximum likelihood parameters. The IS approach allows for a much wider set of data and models than the zero-sum constraint.
The package contains a fourth documented function, integral_peak, which is a numerical procedure for evaluating the integrals needed in the IS approach. The function is exported for use in other packages, but does not need to be called independently for the purposes of SADISA.
We represent the data, \(\mathcal{D}\), of a single community sample as abundance frequencies \(s_{k}\) (number of species that are observed \(k\) times in the sample). The sampling formula is given by a product of Poisson samples with parameters \(\lambda _{k}\)
\(\mathbb{P}(\mathcal{D})=\mathrm{e}^{-\Lambda }\prod_{k\mid s_{k}>0}\frac{\lambda _{k}^{s_{k}}}{s_{k}!}\)
with \(\lambda_{k}\) the expected number of observed species with abundance \(k\),
\(\lambda _{k} = \mathbb{E}s_{k}=\int_0^{\infty} \mathbb{P}(k|x)\,\rho (x)\,\mathrm{d}x\)
and \(\Lambda\) the expected number of observed species,
\(\Lambda = \sum_{k>0}\mathbb{E}s_{k}=\int \mathbb{P}(\text{obs}|x)\,\rho (x)\,\mathrm{d}x\)
where \(\mathbb{P}(\text{obs}|x)\) the probability that a species with relative abundance x in the metacommunity is present in the data,
\(\mathbb{P}(\text{obs}|x)=1-\mathbb{P}(0|x)\)
First clear memory and load the package:
rm(list = ls())
library(SADISA)
Then, choose an abundance data set.
For a single sample, you can use:
abund <- c(1717,1681,983,788,755,724,681,644,617,381,379,376,364,346,345,325,322,294,289,
288,285,264,248,244,236,236,229,218,203,201,188,184,177,167,164,163,156,149,147,
143,121,118,111,101,100,99,98,98,98,93,92,92,88,87,85,85,82,81,80,78,76,70,68,68,
67,67,64,63,63,61,58,55,55,55,54,52,52,51,50,49,47,45,45,43,43,41,40,39,39,38,38,
36,33,33,33,33,33,32,31,30,29,29,28,28,28,27,27,27,26,26,26,26,25,25,25,25,23,23,
23,23,22,22,22,21,21,21,21,20,19,18,17,16,16,16,15,15,15,14,14,14,13,13,13,13,13,
12,12,12,12,12,12,12,10,10,10,10,10,10,10,9,9,8,8,8,7,7,7,7,7,7,6,5,5,5,5,5,5,5,5,
4,4,4,4,4,3,3,3,3,3,3,3,3,3,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1)
This is one of the censuses of the 50 ha Barro Colorado Island forest plot in Panama.
Then, provide the model that you want the loglikelihood for. For instance, if we want a metacommunity that is neutral with point speciation, and a local community that is neutral but with limited dispersal from the metacommunity, the model is:
model <- c('pm','dl')
with 'pm' for point mutation and 'dl' for dispersal limitation.
Then choose values for the model parameters. These are \(\theta\), the fundamental biodiversity parameter, and \(I\), the fundamental dispersal parameter. Let us choose:
pars <- c(4.793930230665386e+01, 2.174825700126286e+03)
Let us now calculate the loglikelihood and store it in 'result':
result <- SADISA_loglik(abund = abund,pars = pars,model = model)
result
## [1] -317.7003
Have a look at the test file SADISA_test.R included in the package for further examples of SADISA_loglik.
Let us now try to find the maximum likelihood parameters for this model and this data set. We need to initialize the optimization by setting initial parameter values and indicating which parameters need to be optimized, for example:
initpars <- c(40,2000)
idpars <- c(1,1)
Here we are optimizing both parameters, because idpars has a 1 in each element. If we just wanted to optimize one parameter, we would use
initpars <- c(40,2000)
idpars <- c(0,1)
So here we only optinmize I and give it an initial value of 2000. We must also specify whether some parameters are set equal to others or not. In this example, it does not make much sense to set the parameters equal, but we still show how to do this. We store this information in the variable 'labelpars'. In this case we use
labelpars <- c(1,2)
which means that we are considering two parameter values (out of two) with labels 1 and 2. The 1 corresponds to the first parameter in initpars and idpars and the 2 to the second.
To run the optimization we type:
result <- SADISA_ML(abund = abund,initpars = initpars,idpars = idpars, labelpars = labelpars,model = model)
The result is:
The loglikelihood for the initial parameter values is -320.9138.
Parameters after likelihood maximization: [1] 40.000 4016.133
Maximum loglikelihood: -319.1055
Let us look at an example with multiple samples. We load the available data sets:
data(datasets)
dataset$dset2.abunvec contains various data sets with multiple samples. Let us select the first one:
abund <- datasets$dset2.abunvec[[1]]
Because this data set contains three samples we need to specify parameters for three samples, which we take from the file fitresult.RData provided with the package:
data(fitresults)
pars <- fitresults$fit4.parsopt[[1]]
Note that we have named the parameters. Let us fix \(theta\) and optimize the the \(I\) parameters assuming they are all equal. This can be coded in labelpars, initpars and idpars as follows:
labelpars <- list(c(1,2),c(1,2),c(1,2))
initpars <- c(pars[[1]][1],pars[[1]][2])
idpars <- c(0,1)
Because the parameters to be optimized, I, are all assumed equal, they all receive a 2. The initial value of I will then be in initpars[2]. All $\theta$s are equal (but there is of course only one \(\theta\)), so they all receive a 1. Its fixed value is in initpars[1].
Now we run the optimization by adding the option mult = 'ms':
result <- SADISA_ML(abund = abund,initpars = initpars,idpars = idpars, labelpars = labelpars,model = model,mult = 'ms')
The result is:
The loglikelihood for the initial parameter values is -1116.12.
Parameters after likelihood maximization: [[1]] [1] 259.42034 44.45759
[[2]] [1] 259.42034 44.45759
[[3]] [1] 259.42034 44.45759
Maximum loglikelihood: -1116.12
We observe that the starting values were indeed the optimal values.
Now we show an example where we no longer assume that all the I values are the same. We then use;
labelpars <- list(c(1,2),c(1,3),c(1,4))
initpars <- c(pars[[1]][1],pars[[1]][2],pars[[2]][2],pars[[3]][2])
idpars <- c(0,1,1,1)
We run again the optimization by adding the option mult = 'ms':
result <- SADISA_ML(abund = abund,initpars = initpars,idpars = idpars, labelpars = labelpars,model = model,mult = 'ms')
The result is:
The loglikelihood for the initial parameter values is -1116.12.
Parameters after likelihood maximization: [[1]] [1] 259.42034 63.43168
[[2]] [1] 259.4203 31.5572
[[3]] [1] 259.42034 35.50356
Maximum loglikelihood: -1100.448
Assume now that the three samples actually represent three different guilds. Again we want to optimize the I parameters, but we keep \(\theta\) fixed. We use the same structure:
labelpars <- list(c(1,2),c(1,3),c(1,4))
initpars <- c(pars[[1]][1],pars[[1]][2],pars[[2]][2],pars[[3]][2])
idpars <- c(0,1,1,1)
and run the optimization, but with the option mult = 'mg':
result <- SADISA_ML(abund = abund,initpars = initpars,idpars = idpars, labelpars = labelpars,model = model,mult = 'mg')
The result is:
The loglikelihood for the initial parameter values is -530.6148.
Parameters after likelihood maximization: [[1]] [1] 259.4203 61.4082
[[2]] [1] 259.42034 32.55765
[[3]] [1] 259.42034 36.77088
Maximum loglikelihood: -522.001
Finally, for a combination of multiple samples and multiple guilds, we set parameters as follows:
abund1a <- abund[[1]]
abund1b <- abund[[2]]
abund1c <- abund[[3]]
abund2 <- list(list(abund1a,abund1a),list(abund1b,abund1b),list(abund1c,abund1c))
labelpars <- list(list(c(1,2),c(1,3)),list(c(1,2),c(1,3)),list(c(1,2),c(1,3)))
initpars <- c(pars[[1]][1],pars[[1]][2],pars[[2]][2])
idpars <- c(0,1,1)
Here we just made up a data set where the two guilds have identical species abundances. We set the I parameters for the two guilds to be different, but they are equal across samples. We fix \(\theta\), but optimize these two I values. We now simply run the same script as before, but with option mult = 'both':
result <- SADISA_ML(abund = abund2,initpars = initpars,idpars = idpars, labelpars = labelpars,model = model,mult = 'both')
The result is:
The loglikelihood for the initial parameter values is -2232.24.
Parameters after likelihood maximization: [[1]] [[1]][[1]] [1] 259.42034 44.45759
[[1]][[2]] [1] 259.42034 44.45759
[[2]] [[2]][[1]] [1] 259.42034 44.45759
[[2]][[2]] [1] 259.42034 44.45759
[[3]] [[3]][[1]] [1] 259.42034 44.45759
[[3]][[2]] [1] 259.42034 44.45759
Maximum loglikelihood: -2232.24
Have fun with SADISA!
Haegeman, B. & Etienne, R.S. (2016). A general sampling formula for community abundance data. Methods in Ecology & Evolution 8: 1506-1519.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.