The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
This document illustrates the use of the package TPD for calculating several aspects of the functional diversity of biological communities. The functions included in TPD are based on the the trait probability densities of populations and species (TPDs), and its extension to communities (TPDc). These methods allow estimating several components of functional diversity and to partition it across scales. This collection of methods constitutes a unified framework that incorporates the underlying probabilistic nature of trait distributions in a uni- or multivariate trait space.
##The probabilistic nature of functional diversity
The collection of species that compose a community display a variety of trait values that conform a multivariate distribution of traits. As early as 1957, Hutchinson proposed his concept of niche, which is the multidimensional hypervolume in which a species can maintain a population. Hutchinsonian hypervolumes are generally conceived as uniform features, and all the points contained within them are assigned an equal probability of persistence of the species. Conseuquently, these hypervolumes can be characterised by their boundaries.
Nevertheless, this is not a totally satisfying conception, because some parts of the niche of a species present better conditions for subsistence than others. In correspondence, niches of species are usually described, conceived and represented as probability density functions. The same representation is generally applied to the trait distributions of species, reflecting the fact that individuals of a given species have some degree of variability in their trait values, and that some trait values (or combinations of trait values in the case of multiple traits) are more likely than others, just as it is more likely to find a 1.70 m tall person than a 2.10 m tall one.
Despite this, most methods analysing the functional diversity of communities are based on the consideration of a single value for each species and trait (the average values of each species for each trait), most species display non-negligible differences in the traits of their individuals. Probability density functions can be used to reflect the unequal probabilities of different trait values. Throughout this vignette, and in the TPD package, we will refer to these functions as Trait Probability Density (TPD).
Consider for instance the dataset trees, contained in the package datasets of R. It contains 31 observations of the girth, height and volume of black cherry trees. Let us calculate the TPD of the height for this population of cherry trees:
The plot shows clearly that heights around 75 ft are much more likely than heights higher than 90 ft.
Because TPD’s are probability density functions, they integrate to 1, which means that the area under the plotted curve equals 1. To calculate this integral, we first expand a bit the range of traits of the database –we consider values between 50 and 100 ft; we want to be sure that our interval encompasses all the distribution–, and divide the trait axis into equal-length intervals. Although it is best to use a high number of intervals, in this example, for the sake of visibility, we have divided it into 50 intervals:
grid <- seq(from = 50, to = 100, length.out = 50)
edge_length <- grid[2] - grid[1]
#Each interval has this size (in trait units):
edge_length
#> [1] 1.020408Now, let us evaluate the TPD function in each point of the grid.
kde_height <- density(trees$Height, from = 50, to = 100, n = 50)
plot(kde_height, main = "TPD height")
points(kde_height$x, kde_height$y, pch = 16, col = 2 , cex=0.6)
abline(v = grid, col = "grey50", lwd = 0.3)
The sum of the areas of all the rectangles with base edge_length = 1.02, and height equal to the value of the TPD function evaluated in each point of the grid is:
Which is roughly 1! The TPD package uses kernel density estimations procedures to calculate the TPD of populations (when trait information of species is available at different locations, eg. different habitats) or species (when trait information of species is available at different points, and we assume a single TPD for the species regardless of location). We refer to these functions as TPDs. Because of the multidimensional nature of traits, the package allows estimating TPDs for single or multiple traits, with the function TPDs, which makes use of the kernel density estimation functions of the package ks. TPDs estimates a TPDs for each species or population included in the data.
##The TPDs function
To illustrate the use of TPDs, we are going to use the database iris, which contains measurements (in cm) of the sepal length and width and petal length and width, for 50 flowers from each of 3 species of Iris (I. setosa, I. versicolor, and I. virginica)
head(iris)
#> Sepal.Length Sepal.Width Petal.Length Petal.Width Species
#> 1 5.1 3.5 1.4 0.2 setosa
#> 2 4.9 3.0 1.4 0.2 setosa
#> 3 4.7 3.2 1.3 0.2 setosa
#> 4 4.6 3.1 1.5 0.2 setosa
#> 5 5.0 3.6 1.4 0.2 setosa
#> 6 5.4 3.9 1.7 0.4 setosaSuposse that we want to calculate the TPDs of each species considering Sepal.Length and Sepal.Width. Estimating these TPDs’s is very simple:
traits_iris <- iris[, c("Sepal.Length", "Sepal.Width")]
sp_iris <- iris$Species
TPDs_iris <- TPDs(species = sp_iris, traits_iris)
#> -------Calculating densities for One population_Multiple species-----------After a few seconds of calculations, the object TPDs_iris is created. This object, of class TPDsp contains, along with other information, the grid of cells in which the function was evaluated, contained in TPDs_iris$data$evaluation_grid, and the probability associated to each of those cells, contained in a list TPDs_iris$TPDs with one element for each species:
head(TPDs_iris$data$evaluation_grid)
#> Sepal.Length Sepal.Width
#> 1 3.760000 1.64
#> 2 3.783518 1.64
#> 3 3.807035 1.64
#> 4 3.830553 1.64
#> 5 3.854070 1.64
#> 6 3.877588 1.64
nrow(TPDs_iris$data$evaluation_grid)
#> [1] 40000
names(TPDs_iris$TPDs)
#> [1] "setosa" "versicolor" "virginica"
head(sort(TPDs_iris$TPDs$setosa, decreasing = TRUE))
#> 22455 22255 22655 22054 22254
#> 0.0006073417 0.0006067314 0.0006064457 0.0006051767 0.0006050836
#> 22055
#> 0.0006045352
sum(TPDs_iris$TPDs$setosa)
#> [1] 1There are a lot of cells in the grid, resulting from dividing each axis into 200 equal intervals. This number could be modified with the argument n_divisions of TPDs, which defaults to 200 for 2 dimensions, but increasing it results in higher computation times (because the number of cells increases exponentially with dimensions), with rather insignificant improvements in accuracy. Most importantly, TPDs_iris contains the TPDs of the three species (in TPDs$TPDs), which are vectors containing the probability associated to each point of the evaluation grid:
summary(TPDs_iris$TPDs)
#> Length Class Mode
#> setosa 40000 -none- numeric
#> versicolor 40000 -none- numeric
#> virginica 40000 -none- numeric
# The sum of all the elements in each TPDs is equal to 1:
sapply(TPDs_iris$TPDs, sum)
#> setosa versicolor virginica
#> 1 1 1The function plotTPD can be used to visualize the resulting TPDs’s. Note that it can only handle 1 or 2-dimensional data, and that in the case of 2 dimensional plots, the packages gridExtra and ggplot2 must be installed.
plotTPD(TPD = TPDs_iris, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
Now that we are able to visualize TPD’s, we are going to show an important aspect of their construction: alpha. The parameter alpha determines the proportion of the probability density function of each species or population that will be included in the resulting TPD (Blonder et al. 20114; Swanson et al. 2015). This means that setting alpha = 1 will include the whole function, whereas alpha = 0.5 will include only a 50%. It is important to remarks that in the cases in which alpha is set to a value smaller than 1, the TPD function rescales the probabilities so that they add up to 1. By default, alpha is set to 0.95; thus TPDs is not too sensitive to outliers. Let us visualize the effect of alpha in the calculation of a 1-dimensional TPD. First, lets set alpha = 1:
traits_iris_d1 <- iris[, c("Sepal.Length")]
sp_iris <- iris$Species
TPDs_iris_d1_a1 <- TPDs(species = sp_iris, traits = traits_iris_d1, alpha=1)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDs_iris_d1_a1, nRowCol = c(1,3)) 
Now, alpha = 0.95, the default value:
TPDs_iris_d1_a095 <- TPDs(species = sp_iris, traits = traits_iris_d1, alpha=0.95)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDs_iris_d1_a095, nRowCol = c(1,3)) 
And this is how alpha = 0.5 looks like:
TPDs_iris_d1_a05 <- TPDs(species = sp_iris, traits = traits_iris_d1, alpha=0.5)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDs_iris_d1_a05, nRowCol = c(1,3)) 
Indeed, the same logic applies for higher dimensions:
TPDs_iris_a95 <- TPDs(species = sp_iris, traits = traits_iris, alpha=0.95)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDs_iris_a95, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
TPDs_iris_a75 <- TPDs(species = sp_iris, traits = traits_iris, alpha=0.75)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDs_iris_a75, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
(NOTE: Be careful when making 2 dimensional plots. If you try to plot too many species or populations at the same time, it can take quite a long time. We recommend to use the argument whichPlot in PlotTPD to control for this.)
As we mentioned above, sometimes there is trait information at the popolation level. Imagine that we have measured traits on individuals of each species in two different environments. The argument samples of TPDs allows us to calculate a separate TPDs for each population of each species. For example, suppose that the first 25 observation of each species belong to “Site.1” and the other 25 belong to “Site.2”.
pops_iris <- rep(c(rep("Site.1", 25), rep("Site.2", 25)), 3)
TPDs_pops_iris <- TPDs (species = sp_iris, traits = traits_iris, samples = pops_iris)
#> -------Calculating densities for Multiple populations_Multiple species-----------
plotTPD(TPD = TPDs_pops_iris, nRowCol = c(3,2))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
Because the assignment of individuals to sites in this example is somewhat random, there are not important differences in the TPDs of populations of the same species. However, in real conditions, differences in the functional traits between conspecifics living under different conditions can be substantial, and therefore it is important to take this aspect into account (Carmona et al. 2015).
The TPDs function requires a high quantity of information to work: one measurement per individual and trait cosidered, and all the traits must be measured in all individuals in order to place them in the multidimensional space. In addition, several individuals are required to estimate reliable TPDs’s. In many occasions, we do not have access to such a high-quality information. The TPDsMean function is designed for those cases. TPDsMean performs the same task as TPDs, but it estimates the probabilities by calculating a multivariate normal distribution for each species or population, rather than using kernel density estimations. Hence, the only information required is the mean and standard deviation of each trait considered for each species or population. Let us imagine that we only have the means and standard deviations of the iris species:
names_iris <- unique(iris$Species)
mt1 <- tapply(iris[, "Sepal.Length"], iris$Species, mean)
mt2 <- tapply(iris[, "Sepal.Width"], iris$Species, mean)
means_iris <- matrix(c(mt1, mt2), ncol=2)
st1 <- tapply(iris[, "Sepal.Length"], iris$Species, sd)
st2 <- tapply(iris[, "Sepal.Width"], iris$Species, sd)
sds_iris <- matrix(c(st1, st2), ncol=2)
TPDsMean_iris<- TPDsMean(species = names_iris, means = means_iris, sds = sds_iris)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDsMean_iris, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
TPDc: from species to communitiesOne interesting feature of TPD’s is that the concept presented above for species or pupulations can be easily scaled up to express the functional structure of communities. This is the goal of the function TPDc. TPDc combines the information contained in the TPDs of the species in the community with information about their abundances, resulting in the Trait Probabiity Density of the community (which we called TPDc). The rationales is very simple: for each cell of the grid in which the functional space is divided, TPDc is the result of summing the probability of each of the species present in the community,weighted by their relative abundances.
We can illustrate this concept with the iris example. Let us imagine three different communities containing different abundances of each species:
abundances_comm_iris <- matrix(c(c(0.5, 0.4, 0), #I. virginica absent
c(0.0, 0.9, 0.1 ), #I. versic. dominates; setosa absent
c(0.0, 0.1, 0.9 )), #I. virg. dominates; setosa absent
ncol = 3, byrow = TRUE, dimnames = list(paste0("Comm.",1:3),
unique(iris$Species))) To calculate the TPDc’s of a group of communities, we first have to calculate the TPDs of all the species present in each community. (This step is important: if you do not have the TPDs of all the species or populations, you cannot estimate the TPDc of the community, and TPDc will end with an error).
TPDs_iris <- TPDs(species = sp_iris, traits_iris)
#> -------Calculating densities for One population_Multiple species-----------
TPDc_iris <- TPDc(TPDs = TPDs_iris, sampUnit = abundances_comm_iris )The resulting object (TPDc_iris) is an object of class TPDcomm, containing several pieces of information inherited from TPDs_iris, such as the coordinates of the evaluation grid (in TPDc_iris$data$evaluation_grid).
What is new in this object is the information contained in its component $TPDc. Specifically, we are interested in the element TPDc_iris$TPDc$TPDc, which is a list with an element for each community (length(TPDc_iris$TPDc$TPDc) = 3), each one containing the probability associated to each cell of the grid in each community. In fact, the TPDc of a community reflects the probability of observing a given trait value when extracting a random individual from the community. Because TPDc’s are probability density functions, they integrate to 1:
(NOTE: the probabilities contained in a TPDc will always sum 1, regardless of the values of abundance provided to the TPDc function, which are automatically transformed to relative abundances)
Similar to what we did with TPDs’s, plotTPD can be used to provide a graphical representation of TPDc’s of 1 or 2 dimensions. Let us examine the three communities:
plotTPD(TPD = TPDc_iris, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
The plots clearly reflect our expectations when we created the communities: the part of the functional space occupied by I. setosa is empty in Comm.2 and Comm.3, where that species is not present. In addition, Comm.2 and Comm.3, which share the same two species (I. versicolor and I. virginica), occupy the same part of the functional space. However, because of the different abundances of their species, the TPDc’s of these communities differ, reflecting the higher abundance of I. versicolor in Comm. 2 and of I. virginica in Comm.1.
TPDs’s and TPDc’s are powerful tools for studying the functional diversity of biological communities. The TPD package includes several functions that estimate different indices reflecting complimentary aspects of functional diversity. With the aim to help users to select for the most adequate method depending on specific questions, we divide these methods into four different categories attending to two independent criteria.
The first criteria is whether the identity or number of species is or not of primary concern. In some cases (1), we are only interested on the aggregated probability distribution, that is, the TPD of the studied entity (which can be species, populations or communities). For example, if we are interested on how does the ammount of functional volume occupied by communities vary across environmental gradients, we only need to know the TPDc’s of communities. In such case, it would have been correct to sample and measure traits from random individuals in each community, constructing the TPDC’s without having identified any species. By contrast (2), sometimes the interest is not only on the TPD of the community, but on how the different species that compose it are organised in the functional space. This includes the study of functional diversity in terms of the functional dissimilarity of species, or the study of functional redundancy.
These two groups can be further divided according to whether (a) we are interested in studying properties only at the within-unit level (units can be species, populations or communities), or (b) we are interested in analysing the differences between these units, for which we have to consider more than one unit simultaneously.
The next table shows the methods that compose the framework, classified according to the above-stated criteria, along with the associated specific functions included in the TPD package:
| (1) Interest is only on the aggregated probability distribution | (2) Interest is not only on the aggregated probability distribution | |
|---|---|---|
| (a) Within units | Functional Richness, Evenness and Divergence (REND) |
Functional redundancy (redundancy) |
Traits sampling (tSamp) |
Species dissimilarity (dissim) |
|
| (b) Between units | Overlap-based dissimilarity (dissim) |
Partition of functional diversity with Rao (dissim + Rao) |
Dissimilarity decomposition (dissim) |
## 1. Species are not of primary concern
### 1.a. Indices for single units
The methods included in this category are intended for cases in which we are purely interested in some feature of the functional structure of individual populations, species or communities. This means that the results yielded for each unit of analysis is totally independent from the rest of units. The methods included here, and the associated functions are:
####Functional Richness, Evenness and Divergence (REND)
These three indices of functional diversity were originally described by Mason et al. (2005). Because a deeper study of their biological significance is out of the scope of this document, we refer readers to that reference for further details.
Functional richness (FRic) is the amount of functional volume occupied by the analysed unit (species/population/community). Therefore, a species with great variability in traits between their individuals will display a higher FRic value than a species with less variability.
Functional evenness (FEve) reflects the evenness of the abundance of the different trait values in the analysed unit. Imagine two communities with the same functional richness (the same degree of variability in traits between their individuals). Suppose that some traits are much more abundant than others in the first species, whereas all the traits have a similar abundance in the second species: FEve for the second species should be higher than FEve for the first one.
Functional divergence (FDiv) reflects the distribution of abundances within the functional trait volume occupied by the analysed unit. A species in which the most abundant trait values are away from the center of gravity of the functional space –eg. individuals are either very small, or very big– will display high FDiv, whereas a species in which the most abundant trait values are similar –eg. most individuals having intermediate size– will have low FDiv .
The function REND calculates these three indices using the TPDs’s and TPDc’s of populations/species and communities, respectively. The function works with one or more dimensions, thus expanding the framework presented in Mason et al. (2005) to multiple traits without modifying its original rationale, based on probabilities. Let us start with species with one and two dimensions:
TPDs_iris_d1 <- TPDs(species = sp_iris, traits_iris_d1)
#> -------Calculating densities for One population_Multiple species-----------
RED_d1 <- REND(TPDs = TPDs_iris_d1)
#> Calculating FRichness of species
#> Calculating FEvenness of species
#> Calculating FDivergence of species
TPDs_iris_d2 <- TPDs(species = sp_iris, traits_iris)
#> -------Calculating densities for One population_Multiple species-----------
RED_d2 <- REND(TPDs = TPDs_iris_d2)
#> Calculating FRichness of species
#> Calculating FEvenness of species
#> Calculating FDivergence of speciesRED_d1 and RED_d2 contain the FRic, FEve and FDiv values of the three species considering one and 2 traits simultaneously. We can plot the respective TPDs’s, along with their FRich values:
plotTPD(TPD = TPDs_iris_d1, nRowCol = c(1, 3), leg.text = paste0(names(RED_d1$species$FRichnes),
"; FRic=", round(RED_d1$species$FRichnes, 3)))
plotTPD(TPD = TPDs_iris_d2, nRowCol = c(1, 3), leg.text = paste0(names(RED_d2$species$FRichnes),
"; FRic=", round(RED_d2$species$FRichnes, 3)))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
The first thing to underscore is that FRic is given in the original trait units, which means that in the one-dimensional case (Sepal.Length), FRic is expressed in cm and in the two dimensional case (Sepal.Length and Sepal.Width) it is expressed in cm2. I. virginica is the species that occupies the biggest proportion of the functional space, both for one and two traits, and I. setosa the one occupying the smallest proportion.
The plots also reveal that I. setosa occupies a portion of the functional space that is distinct from the ones occupied by the other two species, which are more similar –with I. versicolor occupying a slightly more central position than I. virginica. We are going to take advantage of this observation to show the calculation of FDiv, and its application to communities. Let us create three communities, with different abundances of each species:
abundances_comm_iris_divergence <- matrix(c(c(0.45, 0.1, 0.45), # Different species are more abundant
c(0.05, 0.9, 0.05 ), # Different species are less abundant
c(0.9, 0.05, 0.05 )), # A species with extreme trait values is very abundant
ncol = 3, byrow = TRUE, dimnames = list(paste0("Comm.",1:3),
unique(iris$Species)))
TPDc_iris_divergence_d1 <- TPDc(TPDs = TPDs_iris_d1, sampUnit = abundances_comm_iris_divergence)
RED_comm_d1 <- REND(TPDc = TPDc_iris_divergence_d1)
#> Calculating FRichness of communities
#> Calculating FEvenness of communities
#> Calculating FDivergence of communities
plotTPD(TPD = TPDc_iris_divergence_d1, nRowCol = c(1, 3),
leg.text = paste0(names(RED_comm_d1$communities$FDivergence),
"; FDiv=", round(RED_comm_d1$communities$FDivergence, 3)))
TPDc_iris_divergence_d2 <- TPDc(TPDs = TPDs_iris_d2, sampUnit = abundances_comm_iris_divergence)
RED_comm_d2 <- REND(TPDc = TPDc_iris_divergence_d2)
#> Calculating FRichness of communities
#> Calculating FEvenness of communities
#> Calculating FDivergence of communities
plotTPD(TPD = TPDc_iris_divergence_d2, nRowCol = c(1, 3),
leg.text = paste0(names(RED_comm_d2$communities$FDivergence),
"; FDiv=", round(RED_comm_d2$communities$FDivergence, 3)))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
Comm.3, with a great proportion of their TPDc being away from the center, displays the highest FDiv value, followed by Comm.1. By contrast, Comm.2, where I. versicolor dominates, has the lowest FDiv value. Interestingly, given that the three communities are composed of the same species, they have the same value of FRic, which is independent of species abundances:
RED_comm_d1$communities$FRichness
#> Comm.1 Comm.2 Comm.3
#> 3.738378 3.738378 3.738378
RED_comm_d2$communities$FRichness
#> Comm.1 Comm.2 Comm.3
#> 6.331625 6.331625 6.331625To show the use of functional evenness, we are going to create an artificial set composed of two groups of four species each. Species in each group have the same mean trait value, but different variances. For the sake of visibility, we are going to present a one-dimensional example, but the same applies for higher dimensions.
set.seed(1)
sp_means <- rep(seq(0, 8, length.out = 4), 2)
sp_sds <- rep(c(0.5, 1), each=4)
sp_trait <- numeric()
n_indiv <- 50
for (i in 1:length(sp_means)) {
sp_trait <- c(sp_trait, rnorm(n_indiv, sp_means[i], sp_sds[i]))
}
sp_names <- rep(paste0("SP.", 1:length(sp_means)), each=n_indiv)
TPDs_sp <- TPDs(species = sp_names, traits = sp_trait, alpha = 0.99)
#> -------Calculating densities for One population_Multiple species-----------
plotTPD(TPD = TPDs_sp, nRowCol = c(2,4))
Now, lets create four communities, two with the species in the first group, and two with the species in the second group, and examine their FEve values:
comm_abundances <- matrix(c( c(0.25, 0.25, 0.25, 0.25, 0, 0, 0, 0), #Comm1, goup 1, equal abundances
c(0, 0, 0, 0, 0.25, 0.25, 0.25, 0.25), #Comm2, goup 2, equal abundances
c(0.85, 0.05, 0.05, 0.05, 0, 0, 0, 0), #Comm3, goup 1, unequal abundances
c(0, 0, 0, 0, 0.85, 0.05, 0.05, 0.05)), #Comm4, goup 2, unequal abundances
ncol = 8, byrow = TRUE, dimnames = list(paste0("Comm.",1:4),
unique(sp_names)))
TPDc_sp <- TPDc(TPDs = TPDs_sp, sampUnit = comm_abundances)
RED_sp <- REND(TPDc_sp)
#> Calculating FRichness of communities
#> Calculating FEvenness of communities
#> Calculating FDivergence of communities
plotTPD(TPDc_sp, nRowCol = c(2,2), leg.text = paste0(names(RED_sp$communities$FEvenness),
"; FEve=", round(RED_sp$communities$FEvenness, 3)))
The difference between Comm.1 and Comm.2 reflecs the effect of the evenness in the distribution of probabilities within the species that compose the communities. The probabilities associated to the trait values are generally more even in the species of Comm2 than in those of Comm1, hence the higher value of FEve (0.818 vs 0.706). Comm.3 and Comm.4 are composed of the same species than Comm1. and Comm.2, but with uneven relative abundances, thus reflecting the effect of the evenness in the abundance of species.
####Traits sampling (tSamp)
Some applications based on the traits of species require simulating trait values that could be found in a given population, species or community. The function tSamp performs this task. Lets say that we want to simulate 1,000 trait values from each Iris species:
Iris_samp contains three groups of 1,000 simulated trait values, one for each species. As usual, visualizing the results can be useful:
plotTPD(TPDs_iris, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
par(mfrow=c(1,3))
for (i in 1:3){
plot(Iris_samp$species_samples[[i]], pch = 16, cex = 0.6,
xlim = range(TPDs_iris$data$evaluation_grid[[1]]),
ylim = range(TPDs_iris$data$evaluation_grid[[2]]))
}
Indeed, tSamp also works with TPDc’s, simulating trait values that could have been drawn from a community. We can recover the object TPDc_iris that we created above, draw 1,000 trait values from each community, and plot them:
Iris_comm_samp <- tSamp(TPDc = TPDc_iris, size = 1000)
plotTPD(TPDc_iris, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
par(mfrow=c(1,3))
for (i in 1:3){
plot(Iris_comm_samp$communities_samples[[i]], pch = 16, cex = 0.6,
xlim = range(TPDc_iris$data$evaluation_grid[[1]]),
ylim = range(TPDc_iris$data$evaluation_grid[[2]]))
}
### 1.b. Indices for multiple units
Sometimes one can be interested in the difference in the functional diversity between different units (once again, these can be populations, species or communities), or \(\beta\) diversity, rather than on diversity at the single unit scale or \(\alpha\) diversity. Differences between pairs of units can be used to answer a lot of interesting ecological questions. The methods included in this section are useful for that purpose.
#### Overlap-based functional dissimilarity, and its decomposition (dissim)
When two species, populations or communities share some part of the functional volume that they occupy, their respectives TPD’s must overlap up to some degree. We recommend reading Mouillot et al. (2005), Leps et al. (2006), Geange et al. (2012) or de Bello et al. (2013) as useful references to understand this concept and the related technical, mathematical and ecological details behind the concept of overlap. We are going to rely once again in the iris database to illustrate this method. Remember that the object TPDs_iris_d1 contains the TPDs of the three species for the trait Sepal.Length. We are going to plot the three TPDs together:
par(mfrow=c(1,1))
plot(TPDs_iris_d1$data$evaluation_grid, TPDs_iris_d1$TPDs[[1]], type="n",
ylim = c(0,max(sapply(TPDs_iris_d1$TPDs, max))))
for (i in 1:length(TPDs_iris_d1$TPDs)){
lines(TPDs_iris_d1$data$evaluation_grid, TPDs_iris_d1$TPDs[[i]], lwd=2, col=i)
}
legend("topright", bty = "n", lwd = 2, col = 1:length(TPDs_iris_d1$TPDs),
legend = names(TPDs_iris_d1$TPDs))
As we already knew, I. versicolor and I. virginica are functionally rather similar, as shown by the relatively high overlap between their TPDs’s. On the other hand, I. virginica and I. setosa are very different, with only a very small proportion of their TPDs’s overlapping. We can use dissim to accurately estimate these differences:
dissim_iris_d1 <- dissim(TPDs_iris_d1)
#> Calculating dissimilarities between 3 populations. It might take some time
dissim_iris_d1$populations$dissimilarity
#> setosa versicolor virginica
#> setosa 0.0000000 0.7183746 0.9439597
#> versicolor 0.7183746 0.0000000 0.4252430
#> virginica 0.9439597 0.4252430 0.0000000The dissimilarity matrix quantifies our previous intuitions: I. virginica and I. setosa have a functional dissimilarity of 0.944 (with 1 being the maximum possible value for dissimilarity), whereas the dissimilarity between I. versicolor and I. virginica is 0.425. The function works in a similar way for communities and higher dimensions. We can recreate the object TPDc_iris:
abundances_comm_iris <- matrix(c(c(0.9, 0.1, 0), #I. setosa dominates; virg. absent
c(0.0, 0.9, 0.1 ), #I. Versic. dominates; setosa absent
c(0.0, 0.0, 1 )), #Only I. virg. present
ncol = 3, byrow = TRUE, dimnames = list(paste0("Comm.",1:3),
unique(iris$Species)))
TPDc_iris <- TPDc( TPDs = TPDs_iris, sampUnit = abundances_comm_iris)
plotTPD(TPDc_iris, nRowCol = c(1,3))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
dissim_iris_comm <- dissim(TPDc_iris)
#> Calculating dissimilarities between 3 communities. It might take some time
dissim_iris_comm$communities$dissimilarity
#> Comm.1 Comm.2 Comm.3
#> Comm.1 0.0000000 0.8985651 0.9095471
#> Comm.2 0.8985651 0.0000000 0.3750567
#> Comm.3 0.9095471 0.3750567 0.0000000Comm.1 is very dissimilar to the other two communities, which in turn are rather similar between them. Note, however, that Comm.2 and Comm.3 have a dissimilarity of 0.375, in spite of occupying exactly the same region of the functional space. Therefore, the dissimilarity between these communities is entirely due to differences in the evennes of the distribution of traits between the communities, rather than to differences in the parts of the functional space occupied by each community. The other two elements of the dissim_iris_comm object reflect this fact: dissimilarity between two TPD’s can be decomposed into two complementary components. The first component is due to dissimilarities in the relative abundances of traits shared by the communities (as in the example between Comm.2 and Comm.3), whereas the other is due to the sections of the functional space that are exclusively occupied by one of the communities, but not by the other.
dissim_iris_comm$communities$P_shared
#> Comm.1 Comm.2 Comm.3
#> Comm.1 NA 0.9508338 0.6009773
#> Comm.2 0.9508338 NA 1.0000000
#> Comm.3 0.6009773 1.0000000 NA
dissim_iris_comm$communities$P_non_shared
#> Comm.1 Comm.2 Comm.3
#> Comm.1 NA 0.04916617 0.3990227
#> Comm.2 0.04916617 NA 0.0000000
#> Comm.3 0.39902267 0.00000000 NAAs we expected, $P_shared accounts for all the dissimilarity between Comm.2 and Comm.3. This is because all the species present in Comm.3 are present in Comm.2. Therefore the functional volume occupied by Comm.3 is completely contained (nested) within the functional volume occupied by Comm.2. Because the functional volume occupied by Comm.3 is a subset of the functional volume of Comm.2, $P_shared is equal to 1. Similarly, the dissimilarity between Comm.1 and Comm.2 is mostly accounted by $P_shared, because the most abundant species in Comm.2 is also present in Comm.1, leading to a high level of nestedness. By contrast, the only species present in Comm.3 is not in Comm.1, resulting in a lower (but still substantial) value of $P_shared.
## 2. Species are of primary concern
### 2.a. Indices for single units
In this group we include two methods. The first one is functional redundancy. The second one is the calculation of the dissimilarity between the species that compose a community. These dissimilarities can be used afterwards in indices to calculate alpha functional diversity. The calculation of dissimilarities between species has been explained above, so there is no need for further details. Now, we will focus on redundancy.
redundancy)We consider that two species are redundant in a community when they occupy the same functional volume, which means that they have the same traits. Accordingly, if there are two species that are totally redundant in a community, the loss of one of them will not reduce the functional volume occupied by the community (which is indicated by functional richness. In reality, communities are usually composed of more than two species, and therefore the concept of redundancy involves the simultaneous consideration of the funcional volumes occupied by each species.
The method that we implement in the function (redundancy), evaluates the number of species that occupy each cell of the grid defining the functional space occupied by the community. Afterwards, it performs a weighted mean for the whole community, using the probability associated to each cell (which are contained in TPDc) as the weighting factor. This gives the average number of species that are present in each cell; if we substract 1 to this number, we get the average number of redundant species in the community as a whole, that is, the average number of species that could be lost without in the community without reducing its functional volume.
Now that we are familiarized with the iris dataset (remember: I. setosa is functionally different from I. versicolor and I. virginica, which are similar), we are going to use it to explore the use of redundancy. Let us build a set of communities with different abundances of each species:
TPDs_iris <- TPDs(species = sp_iris, traits_iris)
#> -------Calculating densities for One population_Multiple species-----------
abundances_comm_iris <- matrix(c(c(0.9, 0.05, 0.05), #I. setosa dominates
c(0.0, 0.5, 0.5 ), #I. setosa absent
c(0.33, 0.33, 0.33), #Equal abundances
c(0.1, 0.45, 0.45), #Versicolor and virginica dominate
c(0.5, 0, 0.5)), #versicolor absent
ncol = 3, byrow = TRUE, dimnames = list(paste0("Comm.",1:5),
unique(iris$Species)))
TPDc_iris <- TPDc( TPDs = TPDs_iris, sampUnit = abundances_comm_iris) Communities dominated by I. setosa should have a lower redundancy (because that species occupies a portion of the functional space that is not occupied by the other two), whereas communities in which I. setosa is absent should present a higher degree of redundancy. Finally, communities in which I. setosa is present, but in low abundances, should display intermediate values of redundancy.
FRed_iris <- redundancy(TPDc = TPDc_iris)
plotTPD(TPD = TPDc_iris, leg.text = paste(names(FRed_iris$redundancy),
round(FRed_iris$redundancy, 3), sep="; FRed="))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
redundancy works as we expected; Comm.5, composed of two totally distinct species has no functional redundancy at all. Comm.1, dominated by a functionally unique species, and with low abundance of two similar species, has a very low value of redundancy (0.086. On the opposite extreme, Comm.2, composed by two similar species, has a rather high value of redundancy. Note that redundancy, as defined here, is bounded between 0 and the number of species that compose the community (indicated in FRed_iris$richness) minus 1.
### 2.b. Indices for multiple units ####Partition of functional diversity with Rao (dissim + Rao)
When the interest of the study lies on the spatial or temporal structure of functional diversity, it is often useful to partition the total diversity of all the considered communities (\(\gamma\) diversity) into its within-communities (\(\alpha\)) and between-communities (\(\beta\)) components. The Rao index of functional diversity is a very good alternative to perform this partition (see de Bello et al. 2010 for technical details regarding the definition of Rao as well as mathematical guidelines for correctly performing this partition). Here, it suffices to say that the Rao index requires a characterization of the functional dissimilarities between all the species/populations in the considered group of communities. As we have seen before, these dissimilarities can be easily estimated using the dissim function. This function returns an object of class OverlapDiss, which should be fed to the function Rao, along with the TPDc’s of the communities (calculated with the function TPDc). We are going to rely once again in the irisdataset to illustrate the use of Rao. Imagine a group of communities situated along an environmental gradient. Suppose that I. setosa dominates in the first part of the gradient, where individuals of I. virginica cannot survive, and the opposite happens in the other extreme of the gradient. I. versicolor, which have intermediate traits can live everywhere, but its abundance maximizes in the intermediate part of the gradient. Let us create 5 communities along that gradient:
TPDs_iris <- TPDs(species = sp_iris, traits_iris, alpha=0.95)
#> -------Calculating densities for One population_Multiple species-----------
abundances_comm_iris <- matrix(c(c(0.9, 0.1, 0), # setosa dominates
c(0.4, 0.5, 0.1 ),
c(0.15, 0.7, 0.15), #versicolor dominates
c(0.1, 0.5, 0.4),
c(0, 0.1, 0.9)), #virginica dominates
ncol = 3, byrow = TRUE, dimnames = list(paste0("Comm.",1:5),
unique(iris$Species)))
TPDc_iris <- TPDc( TPDs = TPDs_iris, sampUnit = abundances_comm_iris)
plotTPD(TPD = TPDc_iris, nRowCol = c(1,5))
#> Be patient, in the 2-dimensional case, plots can take some time.
#> If you think it takes too long, consider reducing the number of plots using 'whichPlot'
dissim_iris_sp <- dissim(TPDs_iris)
#> Calculating dissimilarities between 3 populations. It might take some timeOnce that TPDc_iris and dissim_iris_sp are defined, we can proceed to use Rao:
Rao_iris contains a few elements with interesting information about our communities. For instance, Rao_iris$alpha_eqv contains the alpha diversity of each community, expressed in equivalent numbers. Note that for a correct partition of gamma diversity into its beta and alpha components, these alpha values do not correspond exactly with the ones that would have been calculated if each community would have been considered as an isolated unit (see de Bello et al. 2010 for details on this). If we want to have alpha expressed that way, we need to set the argument ’regional = FALSE`:
Here (Rao_iris_noReg$alpha_eqv), we see that Comm.2 is the most diverse, with more than 2 equivalent species, whereas Comm.5, with only two very-similar species has the lowest alpha diversity.
The studied communities have a gamma diversity of Rao_iris$gamma_eqv= 2.108 equivalent species, and the beta diversity is Rao_iris$beta_prop= 32.9%. Rao_iris$pairwise$beta_prop is where we would have to look if we were interested in the differences between pairs of communities:
Rao_iris$pairwise$beta_prop
#> Comm.1 Comm.2 Comm.3 Comm.4 Comm.5
#> Comm.1 NA 0.3585872 0.70921893 0.77714415 0.9279824
#> Comm.2 0.3585872 NA 0.10245613 0.15889514 0.4181624
#> Comm.3 0.7092189 0.1024561 NA 0.03561324 0.2655448
#> Comm.4 0.7771441 0.1588951 0.03561324 NA 0.1183461
#> Comm.5 0.9279824 0.4181624 0.26554478 0.11834614 NAThis confirms that communities that are further away in the gradient from each other (e.g. Comm.1 and Comm.5) are more functionally dissimilar than communities that are in more similar environmental conditions (eg. Comm 4 and Comm.5).
This vignette has been built using R version 3.6.0 (2019-04-26) with the packages TPD 1.1.0, ggplot2 3.1.1, gridExtra 2.3, and ks 1.11.5 Version: [1] “2019-07-02 22:57:39 EEST”
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.