The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
Package Functions
Installation
To install the package, please use:
library(devtools)
install_github("doomlab/ViSe")
This installation will give you the latest version of the package,
regardless of status on CRAN.
library(ViSe)
library(cowplot)
library(ggplot2)
library(plotly)
#>
#> Attaching package: 'plotly'
#> The following object is masked from 'package:ggplot2':
#>
#> last_plot
#> The following object is masked from 'package:stats':
#>
#> filter
#> The following object is masked from 'package:graphics':
#>
#> layout
Example
To demonstrate the use of visual sensitivity analysis, we use the
effect of child maltreatment on the extent of mental health problems in
terms of internalising and externalising behaviour. The study of Kisely
and colleagues (Kisely et al., 2018) was based on a general population
sample in Brisbane, Australia, and compared 3554 mother-child pairs
without ‘substantiated child maltreatment’ to, for example, 73 pairs
with child neglect. Note that the results vary across different types of
maltreatment assessed, we choose child neglect because its results (a
smaller but still considerable l after adjustment) are particularly
suited to illustrating sensitivity analysis. Maltreatment was assessed
‘by linkage to state child protection agency data’. Internalising and
externalising behaviours were measured using the Youth Self-Report (YSR)
scale (Achenbach & Rescorla, 2001) at around the age of 21. The
study reports unadjusted mean differences and mean differences adjusted
for ‘gender, parental ethnicity, maternal age, family income, maternal
relationship status, maternal education, youth income level, youth
education level, youth marital status’ (e.g., likely based on ordinary
least squares regression, but the paper does not specify).
See supplemental document at https://static.cambridge.org/content/id/urn:cambridge.org:id:article:S0007125018002076/resource/name/S0007125018002076sup001.docx
Calculate effect size
To obtain the estimates and two-tailed 95% confidence intervals on
the effect size d scale (via d = \(M_{difference}\) / \(SD_{Total}\), similar to Glass’ \(\Delta\)), we divided the reported
unadjusted and adjusted mean differences for internalising and
externalising by the respective standard deviations of the total
sample.
internal_unadjusted <- list(
mean_diff = 3.68,
lower_diff = 1.73,
upper_diff = 5.62,
sd = 8.29
)
internal_adjusted <- list(
mean_diff = 2.73,
lower_diff = 0.77,
upper_diff = 4.69,
sd = 8.28
)
external_unadjusted <- list(
mean_diff = 3.72,
lower_diff = 2.13,
upper_diff = 5.32,
sd = 6.81
)
external_adjusted <- list(
mean_diff = 3.10,
lower_diff = 1.49,
upper_diff = 4.71,
sd = 6.81
)
list_values <- list(internal_unadjusted, internal_adjusted,
external_unadjusted, external_adjusted)
list_names <- c("internal_unadjusted", "internal_adjusted",
"external_unadjusted", "external_adjusted")
names(list_values) <- list_names
for (i in list_names){
list_values[[i]][["d"]] <- list_values[[i]][["mean_diff"]] / list_values[[i]][["sd"]]
list_values[[i]][["lower_d"]] <- list_values[[i]][["lower_diff"]] / list_values[[i]][["sd"]]
list_values[[i]][["upper_d"]] <- list_values[[i]][["upper_diff"]] / list_values[[i]][["sd"]]
}
unlist(list_values)
#> internal_unadjusted.mean_diff internal_unadjusted.lower_diff
#> 3.68000000 1.73000000
#> internal_unadjusted.upper_diff internal_unadjusted.sd
#> 5.62000000 8.29000000
#> internal_unadjusted.d internal_unadjusted.lower_d
#> 0.44390832 0.20868516
#> internal_unadjusted.upper_d internal_adjusted.mean_diff
#> 0.67792521 2.73000000
#> internal_adjusted.lower_diff internal_adjusted.upper_diff
#> 0.77000000 4.69000000
#> internal_adjusted.sd internal_adjusted.d
#> 8.28000000 0.32971014
#> internal_adjusted.lower_d internal_adjusted.upper_d
#> 0.09299517 0.56642512
#> external_unadjusted.mean_diff external_unadjusted.lower_diff
#> 3.72000000 2.13000000
#> external_unadjusted.upper_diff external_unadjusted.sd
#> 5.32000000 6.81000000
#> external_unadjusted.d external_unadjusted.lower_d
#> 0.54625551 0.31277533
#> external_unadjusted.upper_d external_adjusted.mean_diff
#> 0.78120411 3.10000000
#> external_adjusted.lower_diff external_adjusted.upper_diff
#> 1.49000000 4.71000000
#> external_adjusted.sd external_adjusted.d
#> 6.81000000 0.45521292
#> external_adjusted.lower_d external_adjusted.upper_d
#> 0.21879589 0.69162996
Calculate d and Confidence Interval
To visualise the lower level confidence interval l, we must
obtain the lower bound of the confidence interval for our proposed
effect size. ViSe includes a function calculate_d() that
calculates from t.test() output, dataframes, individual
vectors of data, sample statistics (M, SD, n
for group), t-test values, or a pre-calculated
d-value.
In this example, we have our d value from the original
research, along with sample sizes from the study which can be used to
calculate the two-tailed dlow_central or one-tailed
done_low_central lower confidence interval. The package
vignette shows all possible ways to calculate values from data and
includes the non-centralized confidence intervals for effect size
d as well (below).
internal_unadj_output <- calculate_d(
d = list_values$internal_adjusted$d, # d value
a = .05, # alpha for confidence interval
lower = TRUE, # you expect d to be positive
n1 = 71, # sample size group 1
n2 = 3653 # sample size group 2
)
internal_unadj_output$dlow_central
#> [1] 0.09465985
internal_unadj_output$done_low_central
#> [1] 0.1324648
# note, the program also provide noncentral t confidence intervals
# in this case, they are unusable because d has been calculated from
# mean difference / control rather than mean difference / spooled
# therefore the approximation of t and the noncentral
# limits is not appropriate
Other Examples of calculate_d
# from dataframe
calculate_d(
df = mtcars,
x_col = "am",
y_col = "hp",
a = .05,
lower = TRUE
)
#> $d
#> [1] -0.501465
#>
#> $dlow
#> [1] -1.2067
#>
#> $dhigh
#> [1] 0.2260463
#>
#> $dlow_central
#> [1] -1.247618
#>
#> $dhigh_central
#> [1] 0.2446883
#>
#> $done_low
#> [1] -1.091478
#>
#> $done_low_central
#> [1] -1.121567
#>
#> $M1
#> [1] 126.8462
#>
#> $sd1
#> [1] 84.06232
#>
#> $se1
#> [1] 23.31469
#>
#> $M1low
#> [1] 76.0478
#>
#> $M1high
#> [1] 177.6445
#>
#> $M2
#> [1] 160.2632
#>
#> $sd2
#> [1] 53.9082
#>
#> $se2
#> [1] 19.28522
#>
#> $M2low
#> [1] 119.7464
#>
#> $M2high
#> [1] 200.7799
#>
#> $spooled
#> [1] 67.60359
#>
#> $sepooled
#> [1] 24.33304
#>
#> $n1
#> [1] 13
#>
#> $n2
#> [1] 19
#>
#> $df
#> [1] 30
#>
#> $t
#> [1] -1.373318
#>
#> $p
#> [1] 0.1798309
#>
#> $estimate
#> [1] "$d_s$ = -0.50, 95\\% CI [-1.21, 0.23]"
#>
#> $statistic
#> [1] "$t$(30) = -1.37, $p$ = .180"
# from two columns
x <- mtcars$am
y <- mtcars$hp
calculate_d(
x_col = x,
y_col = y,
a = .05,
lower = TRUE
)
#> $d
#> [1] -0.501465
#>
#> $dlow
#> [1] -1.2067
#>
#> $dhigh
#> [1] 0.2260463
#>
#> $dlow_central
#> [1] -1.247618
#>
#> $dhigh_central
#> [1] 0.2446883
#>
#> $done_low
#> [1] -1.091478
#>
#> $done_low_central
#> [1] -1.121567
#>
#> $M1
#> [1] 126.8462
#>
#> $sd1
#> [1] 84.06232
#>
#> $se1
#> [1] 23.31469
#>
#> $M1low
#> [1] 76.0478
#>
#> $M1high
#> [1] 177.6445
#>
#> $M2
#> [1] 160.2632
#>
#> $sd2
#> [1] 53.9082
#>
#> $se2
#> [1] 19.28522
#>
#> $M2low
#> [1] 119.7464
#>
#> $M2high
#> [1] 200.7799
#>
#> $spooled
#> [1] 67.60359
#>
#> $sepooled
#> [1] 24.33304
#>
#> $n1
#> [1] 13
#>
#> $n2
#> [1] 19
#>
#> $df
#> [1] 30
#>
#> $t
#> [1] -1.373318
#>
#> $p
#> [1] 0.1798309
#>
#> $estimate
#> [1] "$d_s$ = -0.50, 95\\% CI [-1.21, 0.23]"
#>
#> $statistic
#> [1] "$t$(30) = -1.37, $p$ = .180"
# from summary statistics
calculate_d(m1 = 14.37, # neglect mean
sd1 = 10.716, # neglect sd
n1 = 71, # neglect n
m2 = 10.69, # none mean
sd2 = 8.219, # none sd
n2 = 3653, # none n
a = .05, # alpha/confidence interval
lower = TRUE) # lower or upper bound
#> $d
#> [1] 0.4448249
#>
#> $dlow
#> [1] 0.2097233
#>
#> $dhigh
#> [1] 0.6798669
#>
#> $dlow_central
#> [1] 0.2096767
#>
#> $dhigh_central
#> [1] 0.6799731
#>
#> $done_low
#> [1] 0.2475166
#>
#> $done_low_central
#> [1] 0.2474974
#>
#> $M1
#> [1] 14.37
#>
#> $sd1
#> [1] 10.716
#>
#> $se1
#> [1] 1.271755
#>
#> $M1low
#> [1] 11.83356
#>
#> $M1high
#> [1] 16.90644
#>
#> $M2
#> [1] 10.69
#>
#> $sd2
#> [1] 8.219
#>
#> $se2
#> [1] 0.135986
#>
#> $M2low
#> [1] 10.42338
#>
#> $M2high
#> [1] 10.95662
#>
#> $spooled
#> [1] 8.272918
#>
#> $sepooled
#> [1] 0.9913101
#>
#> $n1
#> [1] 71
#>
#> $n2
#> [1] 3653
#>
#> $df
#> [1] 3722
#>
#> $t
#> [1] 3.712259
#>
#> $p
#> [1] 0.0002084243
#>
#> $estimate
#> [1] "$d_s$ = 0.44, 95\\% CI [0.21, 0.68]"
#>
#> $statistic
#> [1] "$t$(3722) = 3.71, $p$ < .001"
# from t-test model
output <- t.test(mtcars$hp ~ mtcars$am, var.equal = TRUE)
n_values <- tapply(mtcars$hp, mtcars$am, length)
calculate_d(
model = output,
n1 = unname(n_values[1]),
n2 = unname(n_values[2]),
a = .05,
lower = TRUE
)
#> $d
#> [1] 0.501465
#>
#> $dlow
#> [1] -0.2260463
#>
#> $dhigh
#> [1] 1.2067
#>
#> $dlow_central
#> [1] -0.2446883
#>
#> $dhigh_central
#> [1] 1.247618
#>
#> $done_low
#> [1] -0.1109204
#>
#> $done_low_central
#> [1] -0.1186368
#>
#> $M1
#> NULL
#>
#> $sd1
#> NULL
#>
#> $se1
#> NULL
#>
#> $M1low
#> NULL
#>
#> $M1high
#> NULL
#>
#> $M2
#> NULL
#>
#> $sd2
#> NULL
#>
#> $se2
#> NULL
#>
#> $M2low
#> NULL
#>
#> $M2high
#> NULL
#>
#> $spooled
#> NULL
#>
#> $sepooled
#> NULL
#>
#> $n1
#> [1] 19
#>
#> $n2
#> [1] 13
#>
#> $df
#> [1] 30
#>
#> $t
#> [1] 1.373318
#>
#> $p
#> [1] 0.1798309
#>
#> $estimate
#> [1] "$d_s$ = 0.50, 95\\% CI [-0.23, 1.21]"
#>
#> $statistic
#> [1] "$t$(30) = 1.37, $p$ = .180"
# from t-values
calculate_d(
t = 1.37,
n1 = unname(n_values[1]),
n2 = unname(n_values[2]),
a = .05,
lower = TRUE
)
#> $d
#> [1] 0.5002533
#>
#> $dlow
#> [1] -0.2271793
#>
#> $dhigh
#> [1] 1.205462
#>
#> $dlow_central
#> [1] -0.2458469
#>
#> $dhigh_central
#> [1] 1.246353
#>
#> $done_low
#> [1] -0.1120615
#>
#> $done_low_central
#> [1] -0.1198044
#>
#> $M1
#> NULL
#>
#> $sd1
#> NULL
#>
#> $se1
#> NULL
#>
#> $M1low
#> NULL
#>
#> $M1high
#> NULL
#>
#> $M2
#> NULL
#>
#> $sd2
#> NULL
#>
#> $se2
#> NULL
#>
#> $M2low
#> NULL
#>
#> $M2high
#> NULL
#>
#> $spooled
#> NULL
#>
#> $sepooled
#> NULL
#>
#> $n1
#> [1] 19
#>
#> $n2
#> [1] 13
#>
#> $df
#> [1] 30
#>
#> $t
#> [1] 1.37
#>
#> $p
#> [1] 0.1808537
#>
#> $estimate
#> [1] "$d_s$ = 0.50, 95\\% CI [-0.23, 1.21]"
#>
#> $statistic
#> [1] "$t$(30) = 1.37, $p$ = .181"
Convert between effect sizes (specification plot)
Not all research studies use d as the effect size of
interest, and ViSe provides functionality to convert
between effect sizes. The other_to_d() function can be used
to convert effect sizes f, \(f^2\), NNT, r, probability of
superiority, U1, U2, U3, and proportional overlap into d.
other_to_d(nnt = 35)
#> [1] 0.051
All options of other_to_d():
f = NULL,
f2 = NULL,
nnt = NULL,
r = NULL,
prob = NULL,
prop_u1 = NULL,
prop_u2 = NULL,
prop_u3 = NULL,
prop_overlap = NULL
The effect size d value can then be used to visualize all
effects and their conversions at once in the
visualize_effects() function. You can use the percent,
color, and font family options to adjust the resulting graph for
readability and color scheme.
visualize_effects(d = list_values$internal_adjusted$d,
circle_color = "lightblue",
circle_fill = "gray",
percent_color = "darkblue",
percent_size = 10,
text_color = "black",
font_family = "Times")
#> $graph
# note graphs look better scaled, try saving them
# ggsave(filename = "visualize_effects.png")
# you can make very ugly graphs if you want
visualize_effects(d = .2,
circle_color = "green",
circle_fill = "orange",
percent_color = "pink",
percent_size = 20,
text_color = "purple",
font_family = "Arial")
#> $graph
This package uses the following conversion functions that can be
implemented separately as well:
d_to_r(d = list_values$internal_adjusted$d)
#> [1] 0.1626596
d_to_f2(d = list_values$internal_adjusted$d)
#> $f
#> [1] 0.1648551
#>
#> $f2
#> [1] 0.02717719
d_to_nnt(d = list_values$internal_adjusted$d)
#> [1] 5.424537
probability_superiority(d = list_values$internal_adjusted$d)
#> [1] 0.5921738
proportion_overlap(d = list_values$internal_adjusted$d)
#> $u1
#> [1] 0.2315626
#>
#> $u2
#> [1] 0.565471
#>
#> $u3
#> [1] 0.6291905
#>
#> $p_o
#> [1] 0.8690581
Visualization of sensitivity of effect size to bias
Now that we have an idea of our d value, the lower
confidence limit l, and other potential effect sizes, we can
create a sensitivity plot of the effect size to bias. To visualize
different d values and their representation of the distribution
overlap, use estimate_d() to examine different effect
sizes:
estimate_d(d = .09,
fill_1 = "red",
fill_2 = "blue",
text_color = "black")$graph
Similarly, estimate_r() shows a scatterplot of the
entered correlation coefficient to visualize the relation between two
variables:
estimate_r(r = .30)$graph
You can then use the two estimation functions to create a graph that
shows you which combinations of effect size and r would
indicate a causal effect. You can enter any effect size from our
conversion options, and these will be converted to d with
labels for inspection. The shaded area represents an area that would be
considered the effect, and the points represent the entered combination
of r and effect size. Points in the shaded area would be considered
sensitive to bias.
You can use the plotly library to hover over those dots
to see their values (also embedded in our shiny app). Note: Not
run to make this package CRAN compatible (plotly makes html files
large).
visual_c_mapped <-
# your lower confidence limit required
visualize_c_map(dlow = list_values$internal_adjusted$lower_d,
# correlation values required
r_values = c(.1, .4, .3),
# other effect sizes you want to plot
d_values = c(.2, .8),
nnt_values = c(60),
# if you think d will be positive
lower = TRUE,
# as many values as the max number effects
point_colors = c("red", "green", "blue"),
# a size for the shapes
size = 2,
# shape 1
shape_1 = 2,
# shape 2, make these the same number if you
# want the shapes overlapping
# we think two different ones helps readability
shape_2 = 3,
# color of the background highlighted area
ribbon_color = "lightblue"
)
visual_c_mapped$graph
ggsave(filename = "visualize_c_map.png", width = 8,
height = 6, dpi = 300)
# ggplotly(visual_c_mapped$graph)
All options for the graph, including their defaults:
visualize_c_map(
dlow,
r_values,
d_values = NULL,
f_values = NULL,
f2_values = NULL,
nnt_values = NULL,
prob_values = NULL,
prop_u1_values = NULL,
prop_u2_values = NULL,
prop_u3_values = NULL,
prop_overlap_values = NULL,
lower = TRUE,
point_colors = c("red", "green", "blue"),
size = 2,
shape_1 = 2,
shape_2 = 3,
ribbon_color = "lightblue"
)
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.