Introduction to caRecall

The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

Introduction

The caRecall package is an API wrapper for the Government of Canada Vehicle Recalls Database (VRD) used by the Defect Investigations and Recalls Division for vehicles, tires, and child car seats. The API wrapper provides access to recall summary information searched using make, model, and year range, as well as detailed recall information searched using recall number.

This vignette provides an overview of the functions available in caRecall and provides a demonstration of using the package to extract information from the VRD. In addition to caRecall, this vignette makes use of the dplyr and ggplot2 packages.

library(caRecall)
library(dplyr)
library(ggplot2)

API Access Key

An API key is required to run the functions in caRecall and query the Vehicle Recalls Database. The key can be acquired at https://tc.api.canada.ca/en/detail?api=VRDB. The API key can be set in the environment using Sys.setenv(VRD_API = 'your_API_key_here'). Alternatively, instead of setting the API key in the environment, the key can be passed into the caRecall functions as an argument.

`caRecall` Functions

The caRecall package focuses on querying data from the Vehicle Recalls Database and functions fall into the following categories:

Recall summary information
Recall counts
Detailed recall information

Recall Summary Information

The recall_by_make(), recall_by_model(), recall_by_years(), and recall_by_number() functions all retrieve recall summary information from the VRD based on user search terms. An overview of the search terms and function arguments includes:

make or model: List of make, manufacturer, or model depending on the function used to search on. Note that the search terms are not case sensitive.
recall_number: List of recall numbers to search on (however, this is typically unknown unless previous searches have been conducted).
start_year and end_year: The year range of the search can be specified and is based on the manufactured year and not the year a recall occurred. If the argument(s) are left empty, the search will include the start and end of the data available, respectively. Note that a vehicle year is typically a year later than the manufactured year (for example, a 2009 Ford would be entered in the database as being manufactured in 2008). This also means that a recall date may occur prior to the year of a vehicle.
limit: The VRD API default number of items to return for a query is 25. There does not a appear to be a maximum limit associated with the API but all functions in caRecall also default to a limit of 25.
partial: The caRecall functions allow the user to specify if partial matches on the search terms are used or not (for example, “Su” would return “Suzuki”, and “Subaru” matches). Note that if partial = FALSE is used, the number of entries returned by the functions may be less than the count provided by the count functions described in the following section which return counts for all partial matches (and is the default behavior of the VRD API).
api_key: If an API key is not set in the environment, an access key can be passed directly into a function.

An example of using recall_by_model() to search for the first five recalls by ‘Ford’ in 1998 would be as follows:

recall_by_make("Ford", start_year = 1998, limit = 5)
#> # A tibble: 5 x 6
#>   `Recall number` `Manufacturer Name` `Model name` `Make name`  Year `Recall date`
#>   <chr>           <chr>               <chr>        <chr>       <int> <date>       
#> 1 1997118         FORD                WINDSTAR     FORD         1998 1997-06-16   
#> 2 1997119         FORD                B SERIES     FORD         1998 1997-06-17   
#> 3 1997124         FORD                WINDSTAR     FORD         1998 1997-06-23   
#> 4 1997165         FORD                MUSTANG      FORD         1998 1997-09-30   
#> 5 1997165         FORD                WINDSTAR     FORD         1998 1997-09-30

Or if a user wanted to search by manufactured year and return the first 10 entries between 1999 and 2001, recall_by_years() could be used:

recall_by_years(start_year = 1999, end_year = 2001, limit = 10)
#> # A tibble: 10 x 6
#>    `Recall number` `Manufacturer Name` `Model name`     `Make name`    Year `Recall date`
#>    <chr>           <chr>               <chr>            <chr>         <int> <date>       
#>  1 1993076         MERCEDES-BENZ       300              MERCEDES-BENZ  2000 1993-05-31   
#>  2 1998048         FORD                F-350 SUPER DUTY FORD           1999 1998-03-25   
#>  3 1998049         FORD                F-350 SUPER DUTY FORD           1999 1998-03-26   
#>  4 1998067         MAZDA               MIATA            MAZDA          1999 1998-04-08   
#>  5 1998069         FORD                SUPER DUTY       FORD           1999 1998-04-08   
#>  6 1998104         FORD                F-350 SUPER DUTY FORD           1999 1998-05-25   
#>  7 1998105         FORD                F-250            FORD           1999 1998-05-25   
#>  8 1998105         FORD                F-350 SUPER DUTY FORD           1999 1998-05-25   
#>  9 1998105         FORD                F-450 SUPER DUTY FORD           1999 1998-05-25   
#> 10 1998105         FORD                F-550 SUPER DUTY FORD           1999 1998-05-25

Recall Counts

The count_recall_by_make(), count_recall_by_model(), and count_recall_by_years() all return the number of recalls available in the VRD based on the search terms. It can be used to quickly get a count of recalls prior to making a query for summary information.

For example, if a user is interesting in first determining the total number of recalls by the manufacturer ‘GOODBABY’ for all products manufactured up to 2008, the count_recall_by_make() could be used.

count_recall_by_make("GOODBABY", manufacturer = TRUE, end_year = 1998)
#> # A tibble: 1 x 1
#>   `Result Count`
#>            <int>
#> 1             47

Detailed Recall Information

The recall_details() function provides detailed recall information for a specified recall number. The information includes details of what the recall is for (for example, ‘Seats and Restraints’) as well as a description on the reason for the recall. This function can only use a recall number search term and therefore likely requires prior searching using the summary recall functions to determine recall numbers of interest.

Note that each recall number provided to the function results in a separate API call. Accordingly, the rate of API calls is limited to one call per second to stay within the API limit. For example, providing a list of 60 recall numbers to the function would take approximately 1 minute to complete.

For example, if a Ford Windstar with recall number of 1997118 was of interest:

recall_windstar <- recall_details(1997118)
tibble(t(recall_windstar)) # transpose for readability
#> # A tibble: 15 x 1
#>    `t(recall_windstar)`[,1]                                                                                                            
#>    <chr>                                                                                                                               
#>  1 "1997118"                                                                                                                           
#>  2 "97S69"                                                                                                                             
#>  3 "Light Truck & Van"                                                                                                                 
#>  4 "Camionnette et fourgonnette"                                                                                                       
#>  5 "WINDSTAR"                                                                                                                          
#>  6 "FORD"                                                                                                                              
#>  7 "27"                                                                                                                                
#>  8 "Seats And Restraints"                                                                                                              
#>  9 "Sièges et dispositifs de retenue"                                                                                                  
#> 10 "Safety Mfr"                                                                                                                        
#> 11 "Sécurité - fabricant"                                                                                                              
#> 12 "NOTE: VEHICLES EQUIPPED WITH SECOND ROW BENCH SEATS AND INTEGRATED CHILD SEAT (ICS). ALL VEHICLES IN THIS RECALL HAVE BEEN CORRECT~
#> 13 "NOTA : Vise les véhicules équipés d’une seconde banquette et du siège intégré pour enfant. Tous les véhicules visés par le présent~
#> 14 "1998"                                                                                                                              
#> 15 "1997-06-16"

Example

In this section, several examples will be shown using caRecall to extract and visualize information of interest.

Setup API key

After getting an API access key from https://tc.api.canada.ca/en/detail?api=VRDB, the key needs to either be set in the environment (as VRD_API) or passed as an argument into each caRecall function.

To check if the VRD API key is in the environment, the following caRecall function can be used:

get_vrd_key()

If the key is in the environment as VRD_API it will return the key value. If not, the function will return an error that the key is not set. The key can be set in the environment using Sys.setenv(VRD_API = "YOUR KEY HERE"). Once it is set, you should be able to leave the api_key argument empty in a caRecall function call.

Getting Data from the VRD

Lets say we want to look in the VRD for the companies that had the most recalls with the items they manufactured in the year 2000. Fist we could see how many items manufactured in 2000 were recalled in the database.

count_recall_by_years(start_year = 2000, end_year = 2000)
#> # A tibble: 1 x 1
#>   `Result Count`
#>            <int>
#> 1           2422

We could then query the database for the summary information associated with these recalls.

recall_summary_2000 <- recall_by_years(start_year = 2000, end_year = 2000, limit = 3000)
recall_summary_2000
#> # A tibble: 2,422 x 6
#>    `Recall number` `Manufacturer Name`       `Model name` `Make name`    Year `Recall date`
#>    <chr>           <chr>                     <chr>        <chr>         <int> <date>       
#>  1 1993076         MERCEDES-BENZ             300          MERCEDES-BENZ  2000 1993-05-31   
#>  2 1999056         FIAT CHRYSLER AUTOMOBILES NEON         CHRYSLER       2000 1999-04-14   
#>  3 1999108         FIAT CHRYSLER AUTOMOBILES NEON         CHRYSLER       2000 1999-06-07   
#>  4 1999111         FLEETWOOD                 TIOGA        FLEETWOOD      2000 1999-06-08   
#>  5 1999137         POLARIS                   SNOWMOBILE   POLARIS        2000 1999-07-26   
#>  6 1999138         MAZDA                     MPV          MAZDA          2000 1999-07-27   
#>  7 1999147         MAZDA                     MPV          MAZDA          2000 1999-07-30   
#>  8 1999151         GENERAL MOTORS            S10          CHEVROLET      2000 1999-08-16   
#>  9 1999151         GENERAL MOTORS            SONOMA       GMC            2000 1999-08-16   
#> 10 1999155         GENERAL MOTORS            SUNFIRE      PONTIAC        2000 1999-08-19   
#> # ... with 2,412 more rows

Note that we also could have also just set the limit argument to a high enough value that all entries in the database would likely be included in the summary information query; however, this could also result in returning a very large dataset if the number of available entries is very high.

We can count the number of recalls for each company by grouping on the Manufacturer name column and summarizing the count. We’ll only look at manufacturers with recall counts above 50.

counts_manu_2000 <- recall_summary_2000 %>%
  group_by(`Manufacturer Name`) %>%
  tally() %>%
  filter(n >= 50)
counts_manu_2000
#> # A tibble: 11 x 2
#>    `Manufacturer Name`      n
#>    <chr>                <int>
#>  1 COACHMEN                70
#>  2 DAIMLERCHRYSLER         66
#>  3 FLEETWOOD               53
#>  4 FORD                   151
#>  5 FREIGHTLINER           189
#>  6 GENERAL MOTORS         239
#>  7 GULF STREAM COACH       56
#>  8 INTERNATIONAL          170
#>  9 MONACO COACH            64
#> 10 PACCAR                  50
#> 11 WINNEBAGO INDUSTRIES    61

There are 11 manufacturers with greater than 50 recalls for products manufactured in 2000.

nb.cols <- 11
mycolors <- colorRampPalette(brewer.pal(8, "Set2"))(nb.cols)

counts_manu_2000 %>% 
  ggplot() + 
  aes(x=`Manufacturer Name`, y=n, fill=`Manufacturer Name`) +
  scale_fill_manual(values = mycolors) +
  geom_col() +
  geom_text(aes(label=n), vjust=-.5, size=3) +
  labs(y="Recall Count") +
  theme(axis.text.x = element_blank(),
        axis.ticks.x = element_blank(),
        axis.line = element_line(color = "black"),
        legend.title = element_text(size = 12),
        legend.text = element_text(size = 8),
        axis.title.x=element_blank()) +
  scale_y_continuous(expand = c(0,0),
                     limits = c(0,250)) +
  ggtitle("Manufacturers with Most Recalls in 2000")

plot of chunk plot1

We could also look at how many recalls two manufacturers have had compared with each other over the over the last 10 years (2011 to 2020).

We would start by querying the API for entries with the two manufacturers. This time, we’ll just set the limit to be reasonably high instead of checking the count available in the database first.

manu_comparison_list <- c("Ford", "Toyota")
recall_comparison <- recall_by_make(manu_comparison_list, start_year = 2011, end_year = 2020, limit = 10000)
recall_comparison
#> # A tibble: 1,266 x 6
#>    `Recall number` `Manufacturer Name` `Model name`     `Make name`  Year `Recall date`
#>    <chr>           <chr>               <chr>            <chr>       <int> <date>       
#>  1 2009290         TOYOTA              CAMRY            TOYOTA       2011 2009-10-07   
#>  2 2010366         FORD                EDGE             FORD         2011 2010-10-25   
#>  3 2010439         TOYOTA              SIENNA           TOYOTA       2011 2010-12-13   
#>  4 2010463         FORD                EDGE             FORD         2011 2010-12-23   
#>  5 2010463         FORD                F-150            FORD         2011 2010-12-23   
#>  6 2010463         FORD                F-250 SUPER DUTY FORD         2011 2010-12-23   
#>  7 2010463         FORD                F-350 SUPER DUTY FORD         2011 2010-12-23   
#>  8 2010463         FORD                F-450 SUPER DUTY FORD         2011 2010-12-23   
#>  9 2010463         FORD                F-550 SUPER DUTY FORD         2011 2010-12-23   
#> 10 2011046         FORD                EXPLORER         FORD         2011 2011-01-31   
#> # ... with 1,256 more rows

We can then plot the total amount of recalls for each year grouped by manufacturer.

recall_comparison %>%
  ggplot() +
  aes(x=`Year`, color = `Make name`) + 
  geom_point(stat='count', size=4) + 
  scale_x_continuous(breaks = seq(2010,2021,1)) +
  labs(title = 'Recall Count per Year',
       y = 'Annual Count', 
       color = 'Manufacturer') +
  theme(axis.title.x=element_blank())

plot of chunk plot2

The plot shows a much lower number of recalls in 2020 for both manufactures; however, this is likely because there has not been sufficient time for recalls to have occurred on more recent products.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.

Introduction to caRecall

Introduction

API Access Key

caRecall Functions

Recall Summary Information

Recall Counts

Detailed Recall Information

Example

Setup API key

Getting Data from the VRD

`caRecall` Functions