The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

PK Model: Assessing the Marginal Impact of Covariates on Drug Exposure

Here we illustrate the varying one covariate at a time approach, keeping all the others at the reference value or category. A two-compartment pharmacokinetic (PK) model defined with ordinary differential equations (ODEs) is used. Covariates Weight, Albumin and Sex had effects on the Clearance (CL) model parameter while Weight and Sex had effects on the Volume of distribution (V) model parameter. For simplicity, there were no included covariates effects on other PK parameters such as peripheral clearance or volume. The approach is general and can be easily extended to any other ODEs model with multiple covariate effects on multiple model parameters.

Specifying a PK Model using mrgsolve

codepkmodelcov <- '
$PARAM @annotated
KA    : 0.5   : Absorption rate constant Ka (1/h)
CL    : 4     : Clearance CL (L/h)
V     : 10    : Central volume Vc (L)
Vp    : 50    : Peripheral volume Vp (L)
Qp    : 10    : Intercompartmental clearance Q (L/h)
CLALB : -0.8  : Ablumin on CL (ref. 45 g/L)
CLSEX : 0.2   : Sex on CL (ref. Female)
CLWT  : 1     : Weight on CL (ref. 85 kg)
VSEX  : 0.07  : Sex on Vc (ref. Female)
VWT   : 1     : Weight on Vc (ref. 85 kg)

$PARAM @annotated // reference values for covariate
WT    : 85    : Weight (kg)
SEX   : 0     : Sex (0=Female, 1=Male)
ALB   : 45    : Albumin (g/L)

$PKMODEL cmt="GUT CENT PER", depot=TRUE, trans=11

$MAIN
double CLi = CL *
    pow((ALB/45.0), CLALB)*
    (SEX == 1.0 ? (1.0+CLSEX) : 1.0)*
    pow((WT/85.0), CLWT)*exp(nCL); 
double V2i = V *
    (SEX == 1.0 ? (1.0+VSEX) : 1.0)*
    pow((WT/85.0), VWT)*exp(nVC);  

double KAi = KA;
double V3i = Vp *pow((WT/85.0),    1);
double Qi = Qp *pow((WT/85.0), 0.75);

$OMEGA @annotated @block
nCL : 0.09       : ETA on CL
nVC : 0.01 0.09  : ETA on Vc

$TABLE
double CP   = CENT/V2i;

$CAPTURE CP KAi CLi V2i V3i Qi WT SEX ALB
'
modcovsim <- mcode("codepkmodelcov", codepkmodelcov)

partab <- setDT(modcovsim@annot$data)[block=="PARAM", .(name, descr, unit)]
partab <- merge(partab, melt(setDT(modcovsim@param@data), meas=patterns("*"), var="name"))
knitr::kable(partab)
name descr unit value
ALB Albumin g/L 45.00
CL Clearance CL L/h 4.00
CLALB Ablumin on CL ref. 45 g/L -0.80
CLSEX Sex on CL ref. Female 0.20
CLWT Weight on CL ref. 85 kg 1.00
KA Absorption rate constant Ka 1/h 0.50
Qp Intercompartmental clearance Q L/h 10.00
SEX Sex 0=Female, 1=Male 0.00
V Central volume Vc L 10.00
VSEX Sex on Vc ref. Female 0.07
VWT Weight on Vc ref. 85 kg 1.00
Vp Peripheral volume Vp L 50.00
WT Weight kg 85.00

Simulate a Reference Subjects with BSV

We simulate the reference subject having the reference covariate values defined in the model which are:
Weight = 85 kg, Sex = Female and Albumin = 45 g/L. We also keep the between subject variability (BSV) to illustrate its effects on the concentration-time profiles on linear and log linear scales.

idata <- data.table(ID=1:nbsvsubjects, WT=85, SEX=0, ALB=45)

ev1 <- ev(time = 0, amt = 100, cmt = 1)
data.dose <- ev(ev1)
data.dose <- setDT(as.data.frame(data.dose))
data.all <- data.table(idata, data.dose)

outputsim <- modcovsim %>%
  data_set(data.all) %>%
  mrgsim(end = 24, delta = 0.25) %>%
  as.data.frame %>%
  as.data.table

outputsim$SEX <- factor(outputsim$SEX, labels="Female")

# Only plot a random sample of N=500
set.seed(678549)
plotdata <- outputsim[ID %in% sample(unique(ID), 500)]

# New facet label names for dose variable
albumin.labs <- c("albumin: 45 ng/mL")
names(albumin.labs) <- c("45")
wt.labs <- c("weight: 85 kg")
names(wt.labs) <- c("85")


p1 <- ggplot(plotdata, aes(time, CP, group = ID)) +
  geom_line(alpha = 0.2, size = 0.1) +
  facet_grid(~ WT + ALB + SEX,
             labeller =  labeller(ALB = albumin.labs,
                                  WT = wt.labs)) +
  labs(y = "Plasma Concentrations", x = "Time (h)")

p2 <- ggplot(plotdata, aes(time, CP, group = ID)) +
  geom_line(alpha = 0.2, size = 0.1) +
  facet_grid(~ WT + ALB + SEX,
             labeller =  labeller(ALB = albumin.labs,
                                  WT = wt.labs)) +
  scale_y_log10() +
  labs(y = "Plasma~Concentrations\n(logarithmic scale)", x = "Time (h)")
  #labs(y = expression(Log[10]~Plasma~Concentrations), x = "Time (h)")+



egg::ggarrange(p1, p2, ncol = 2)

Compute PK Parameters, Plot and Summarize BSV

In this section we compute the PK parameters of interest, provide a plot of the parameters as well as of the standardized ones. We also summarize and report the BSV as ranges of 50 and 90% of patients for each PK parameter. Later on we might choose to include these ranges in the coveffectsplot or not.

derive.exposure <- function(time, CP) {
  n <- length(time)
  x <- c(
    Cmax = max(CP),
    Clast = CP[n],
    AUC = sum(diff(time) * (CP[-1] + CP[-n])) / 2
  )
  data.table(paramname=names(x), paramvalue=x)
}
refbsv <- outputsim[, derive.exposure(time, CP), by=.(ID, WT, SEX, ALB)]

p3 <- ggplot(refbsv, aes(
        x      = paramvalue,
        y      = paramname,
        fill   = factor(..quantile..),
        height = ..ndensity..)) +
  facet_wrap(~ paramname, scales="free", ncol=1) +
  stat_density_ridges(
    geom="density_ridges_gradient", calc_ecdf=TRUE,
    quantile_lines=TRUE, rel_min_height=0.001, scale=0.9,
    quantiles=c(0.05, 0.25, 0.5, 0.75, 0.95)) +
  scale_fill_manual(
    name   = "Probability",
    values = c("white", "#FF000050", "#FF0000A0", "#FF0000A0", "#FF000050", "white"),
    labels = c("(0, 0.05]", "(0.05, 0.25]",
               "(0.25, 0.5]", "(0.5, 0.75]",
               "(0.75, 0.95]", "(0.95, 1]")) +
  theme_bw() +
  theme(
    legend.position = "none",
    axis.text.y     = element_blank(),
    axis.ticks.y    = element_blank(),
    axis.title.y    = element_blank()) +
  labs(x="PK Parameters", y="") +
  scale_x_log10() +
  coord_cartesian(expand=FALSE)

# Obtain the standardized parameter value by dividing by the median.
refbsv[, stdparamvalue := paramvalue/median(paramvalue), by=paramname]

p4 <- ggplot(refbsv, aes(
        x      = stdparamvalue,
        y      = paramname,
        fill   = factor(..quantile..),
        height = ..ndensity..)) +
  facet_wrap(~ paramname, scales="free", ncol=1) +
  stat_density_ridges(
    geom="density_ridges_gradient", calc_ecdf=TRUE,
    quantile_lines=TRUE, rel_min_height=0.001, scale=0.9,
    quantiles=c(0.05, 0.25, 0.5, 0.75, 0.95)) +
  scale_fill_manual(
    name="Probability",
    values=c("white", "#FF000050", "#FF0000A0", "#FF0000A0", "#FF000050", "white"),
    labels = c("(0, 0.05]", "(0.05, 0.25]",
             "(0.25, 0.5]", "(0.5, 0.75]",
             "(0.75, 0.95]", "(0.95, 1]")) +
  theme_bw() +
  theme(
    legend.position = "none",
    axis.text.y     = element_blank(),
    axis.ticks.y    = element_blank(),
    axis.title.y    = element_blank()) +
  labs(x="Standardized PK Parameters", y="") +
  scale_x_log10() +
  coord_cartesian(expand=FALSE, xlim = c(0.3,3))

p3+p4

Ranges of BSV for each PK Parameter:

bsvranges <- refbsv[,list(
    P05 = quantile(stdparamvalue, 0.05),
    P25 = quantile(stdparamvalue, 0.25),
    P50 = quantile(stdparamvalue, 0.5),
    P75 = quantile(stdparamvalue, 0.75),
    P95 = quantile(stdparamvalue, 0.95)), by = paramname]
bsvranges
paramname P05 P25 P50 P75 P95
Cmax 0.7918743 0.9184431 1 1.077698 1.185392
Clast 0.4752010 0.7899361 1 1.286067 1.735681
AUC 0.7063883 0.8917846 1 1.123854 1.313933

Generate and Simulate at Combinations of Covariate of Interest

Based on our observed covariate data, we compute percentiles of interest that we will use to simulate data at. Common practice is to compute the 5,25,75,95 percentiles (the median being the reference). In some cases, we might want to explore the min, max or other extreme case scenarios. Care should be taken as this approach might generate unrealistic combination of covariates that can never appear in a real patient. The utility function expand.modelframe (written by Benjamin Rich) is defined in the setup section of the vignette and can be found in the source code. It facilitates the creation of a set of covariate values varying one at a time.

Generate a Dataset Holding Combinations of Covariates:

reference.values <- data.frame(WT = 85, ALB = 45, SEX = 0)   

covcomb <- expand.modelframe( #defined at the top and now expand_modelframe was added
  WT  = c(56, 72, 98, 128), # P05, P25, P50, P75, P95
  ALB = c(40, 50),          # P05, P50, P95
  SEX = c(1),               # Reference is for SEX=0 (female)
  rv = reference.values)

# Add the reference
covcomb <- rbind(covcomb, data.table(reference.values, covname="REF"))

covcomb$ID <- 1:nrow(covcomb)

covcomb
WT ALB SEX covname ID
56 45 0 WT 1
72 45 0 WT 2
98 45 0 WT 3
128 45 0 WT 4
85 40 0 ALB 5
85 50 0 ALB 6
85 45 1 SEX 7
85 45 0 REF 8

Simulation at Unique Combinations of Covariates

As a first step, we simulate without uncertainty and without BSV using zero_re() at unique combination of covariates and provide a plot to visualize the effects.

idata <- data.table::copy(covcomb)
idata$covname <-  NULL
ev1 <- ev(time=0, amt=100, cmt=1)
data.dose <- as.data.frame(ev1)
data.all <- data.table(idata, data.dose)

outcovcomb<- modcovsim %>%
  data_set(data.all) %>%
  zero_re() %>% 
  mrgsim(end=24, delta=0.25) %>%
  as.data.frame %>%
  as.data.table

outcovcomb$SEX <- factor(outcovcomb$SEX, labels=c("Female", "Male"))

albumin.labs <- c("albumin: 40 ng/mL","albumin: 45 ng/mL","albumin: 50 ng/mL")
names(albumin.labs) <- c("40","45","50")
wt.labs <- c("weight: 56 kg","weight: 72 kg","weight: 85 kg","weight: 98 kg","weight: 128 kg")
names(wt.labs) <- c("56","72","85","98","128")

pkprofiletypical <- ggplot(outcovcomb, aes(x=time, y=CP, col=factor(WT), linetype=SEX)) +
  geom_line(aes(group=ID), alpha = 1, linewidth = 1) +
  facet_nested(ALB + SEX ~ WT,
               labeller= labeller(ALB = albumin.labs, WT = wt.labs, SEX = label_value),
             switch = "y") +
  labs(
    x        = "Time (h)",
    y        = "Plasma Concentrations",
    linetype = "Sex",
    colour   = "Weight",
    caption  = "Simulation without Uncertainty and without BSV") +
  coord_cartesian(ylim=c(0,4))

pkprofiletypical <- pkprofiletypical +theme_bw(base_size = 13)+
  theme(axis.title.y = element_text(size=15))+
  guides(colour   = guide_legend(override.aes = list(alpha = 1, linewidth = 1)),
         linetype = guide_legend(override.aes = list(linewidth = 1), order = 1))+
  coord_cartesian(ylim=c(0,4))
pkprofiletypical

Adding Uncertainty from a Varcov Matrix

First, we will invent a varcov matrix by assuming 25% relative standard errors and correlations of 0.2 across the board. We then simulate a 100 set of parameters using a multivariate normal (kept at 100 for the vignette, use more replicates for a real project). Also, unless the model was written in a way to allow unconstrained parameter values, care should be taken to make sure the simulated parameters are valid and make sense. In a real modeling applications, the software used to fit the model will provide a variance covariance matrix, if possible. Otherwise, the user can rely on set of parameters generated from bootstrap replicates or SIR run.

Variance Covariance Matrix of fixed effects:

theta <- unclass(as.list(param(modcovsim)))
theta[c("WT", "SEX", "ALB")] <- NULL
theta <- unlist(theta)
as.data.frame(t(theta))
KA CL V Vp Qp CLALB CLSEX CLWT VSEX VWT
0.5 4 10 50 10 -0.8 0.2 1 0.07 1

#note that from RsNLME or NONMEM or Monolix the software will give you the varcov just read it it in.
# example NONMEM  read in your run .cov
# varcov <- read.csv(paste("runxyz",".cov",sep=""), header=TRUE, skip=1, sep="")

varcov <- cor2cov(
  matrix(0.2, nrow=length(theta), ncol=length(theta)),
  sd=theta*0.25)
rownames(varcov) <- colnames(varcov) <- names(theta)
as.data.frame(varcov)
KA CL V Vp Qp CLALB CLSEX CLWT VSEX VWT
KA 0.0156250 0.0250 0.06250 0.31250 0.06250 -5e-03 0.001250 0.006250 0.0004375 0.006250
CL 0.0250000 1.0000 0.50000 2.50000 0.50000 -4e-02 0.010000 0.050000 0.0035000 0.050000
V 0.0625000 0.5000 6.25000 6.25000 1.25000 -1e-01 0.025000 0.125000 0.0087500 0.125000
Vp 0.3125000 2.5000 6.25000 156.25000 6.25000 -5e-01 0.125000 0.625000 0.0437500 0.625000
Qp 0.0625000 0.5000 1.25000 6.25000 6.25000 -1e-01 0.025000 0.125000 0.0087500 0.125000
CLALB -0.0050000 -0.0400 -0.10000 -0.50000 -0.10000 4e-02 -0.002000 -0.010000 -0.0007000 -0.010000
CLSEX 0.0012500 0.0100 0.02500 0.12500 0.02500 -2e-03 0.002500 0.002500 0.0001750 0.002500
CLWT 0.0062500 0.0500 0.12500 0.62500 0.12500 -1e-02 0.002500 0.062500 0.0008750 0.012500
VSEX 0.0004375 0.0035 0.00875 0.04375 0.00875 -7e-04 0.000175 0.000875 0.0003063 0.000875
VWT 0.0062500 0.0500 0.12500 0.62500 0.12500 -1e-02 0.002500 0.012500 0.0008750 0.062500

Generating Sets of Parameters with Uncertainty

Second, we generate the sim_parameters dataset using mvrnorm and then incorporate the uncertainty by simulating using a different set of parameters (row) for each replicate.

First Few Rows of a Dataset Containing Simulated Fixed Effects with Uncertainty:

set.seed(678549)
# mvtnorm::rmvnorm is another option that can be explored
# if you have run a bootstrap just use the parameters data generated using all replicates
sim_parameters <- MASS::mvrnorm(nsim, theta, varcov, empirical=T) %>% as.data.table
head(sim_parameters)
KA CL V Vp Qp CLALB CLSEX CLWT VSEX VWT
0.3525490 3.200401 7.920479 35.80060 9.154611 -0.7968278 0.1469476 0.4792149 0.0656564 1.0745008
0.5249089 3.677540 6.911500 45.37793 7.117828 -0.3630370 0.0905770 0.8847586 0.0607989 0.3047879
0.4832810 4.066721 9.170236 51.89540 8.947875 -1.0678602 0.1873986 1.1481026 0.0657778 1.1339100
0.5278150 2.346888 6.033332 44.26334 7.974338 -0.6485870 0.1496622 0.6216810 0.0488802 0.7770958
0.4710727 4.065682 10.607099 38.29416 9.425221 -0.4660593 0.3043478 0.8386740 0.0629995 0.8784929
0.7963261 5.041540 13.192930 43.99648 10.936419 -0.6903318 0.1440387 1.0514400 0.0560966 1.1710921

Iterative Simulations to Apply the Uncertainty

Third, we illustrate how you can iterate over a set of parameters value using a for loop. We then overlay the previous simulation results without uncertainty on the one with uncertainty to visualize the effect of adding it.

idata <- data.table::copy(covcomb)
idata$covname <-  NULL
ev1       <- ev(time=0, amt=100, cmt=1)
data.dose <- as.data.frame(ev1)
iter_sims <- NULL
for(i in 1:nsim) {
  data.all  <- data.table(idata, data.dose, sim_parameters[i])
  out <- modcovsim %>%
    data_set(data.all) %>%
    zero_re() %>% 
    mrgsim(start=0, end=24, delta=0.25) %>%
    as.data.frame %>%
    as.data.table
  out[, rep := i]
  iter_sims <- rbind(iter_sims, out)
}
iter_sims$SEX <- factor(iter_sims$SEX, labels = c("Female", "Male"))


summary_conc <- function(CP) {
  x <- c(
    Cmed = median(CP),
    Clow = quantile(CP, probs = 0.05),
    Cup =  quantile(CP, probs = 0.95)
  )
  data.table(paramname=names(x), paramvalue=x)
}

iter_sims_sum <- iter_sims[, summary_conc(CP), by=.( time, WT, SEX, ALB)]
iter_sims_sum <- spread(iter_sims_sum,paramname,paramvalue)
iter_sims_sum <- as.data.frame(iter_sims_sum)

albumin.labs <- c("albumin: 40 ng/mL","albumin: 45 ng/mL","albumin: 50 ng/mL")
names(albumin.labs) <- c("40","45","50")
wt.labs <- c("weight: 56 kg","weight: 72 kg","weight: 85 kg","weight: 98 kg","weight: 128 kg")
names(wt.labs) <- c("56","72","85","98","128")

pkprofileuncertainty_sum <- ggplot(iter_sims_sum, aes(x=time, col=factor(WT),
                      fill=factor(WT),
                      linetype=SEX)) +
  geom_ribbon((aes(ymin= `Clow.5%` ,ymax=`Cup.95%`)), alpha = 0.4, linetype = 0)+
  geom_line(aes(y=Cmed),alpha=1 , color ="black" , linewidth = 1)+
  facet_nested(ALB +SEX ~ WT,
             labeller= labeller(ALB = albumin.labs,
                                WT = wt.labs,
                                SEX = label_value),switch = "y") +
  labs(
    x        = "Time (h)",
    y        = "Plasma Concentrations",
    linetype = "Sex",
    colour   = "Uncertainty\n5-95%\nWeight",
    fill   = "Uncertainty\n5-95%\nWeight",
    caption  = "Simulation with Uncertainty, without BSV") +
  theme_bw(base_size = 13)+
  theme(axis.title.y = element_text(size=15))+
  guides(fill     = guide_legend(override.aes = list(alpha = 0.4, size = 0.4)),
         linetype = guide_legend(override.aes = list(linewidth = 1), order = 1))+
  coord_cartesian(ylim=c(0,4))

pkprofileuncertainty_sum

Compute PK Parameters and Boxplots

Similar to an earlier section, we compute the PK parameters by patient and by replicate standardize by the computed median for reference subject and provide a plot. We add some data manipulation to construct more informative labels that will help in the plotting.

out.df.univariatecov.nca <- iter_sims[, derive.exposure(time, CP), by=.(rep, ID, WT, SEX, ALB)]

refvalues <- out.df.univariatecov.nca[
  ALB==45 & WT==85 & SEX=="Female",
  .(medparam = median(paramvalue)), by= .(rep,paramname) ]
head(data.frame(refvalues))
rep paramname medparam
1 Cmax 2.0237077
1 Clast 0.4285660
1 AUC 23.9392632
2 Cmax 2.8913245
2 Clast 0.3178367
2 AUC 20.7979014

Median Parameter Values for the Reference:

covcomb$covvalue[covcomb$covname=="WT"] <- paste(covcomb$WT[covcomb$covname=="WT"],"kg")
covcomb$covvalue[covcomb$covname=="ALB"] <- paste(covcomb$ALB[covcomb$covname=="ALB"],"g/L")                   
covcomb$covvalue[covcomb$covname=="SEX"] <- "Male"
covcomb$covvalue[covcomb$covname=="REF"] <- "85 kg\nFemale\n45 g/L"
#covcomb[covname=="REF", covvalue := "85 kg Female 45 g/L"]
covcomb <- as.data.table(covcomb)

out.df.univariatecov.nca <- merge(
  out.df.univariatecov.nca,
  covcomb[, list(ID, covname, covvalue)]
)

setkey(out.df.univariatecov.nca, paramname,rep)

out.df.univariatecov.nca <- merge(
  out.df.univariatecov.nca,
  refvalues)

out.df.univariatecov.nca[, paramvaluestd := paramvalue/medparam]


boxplotdat <- out.df.univariatecov.nca[covname!="REF"]
boxplotdat[covname=="WT",  covname2 := "Weight"]
boxplotdat[covname=="ALB", covname2 := "Albumin"]
boxplotdat[covname=="SEX", covname2 := "Sex"]

boxplotdatREFWT <- out.df.univariatecov.nca[covname=="REF"]
boxplotdatREFWT[, covname2 := "Weight"]
boxplotdatREFWT[, covvalue := covcomb[covname=="REF", covvalue]]

boxplotdatREFSEX <- out.df.univariatecov.nca[covname=="REF"]
boxplotdatREFSEX[, covname2 := "Sex"]
boxplotdatREFSEX[, covvalue := covcomb[covname=="REF", covvalue]]

boxplotdatREFALB <- out.df.univariatecov.nca[covname=="REF"]
boxplotdatREFALB[, covname2 := "Albumin"]
boxplotdatREFALB[, covvalue := covcomb[covname=="REF", covvalue]]

boxplotdat <- rbind(
  boxplotdat,
  boxplotdatREFWT,
  boxplotdatREFSEX,
  boxplotdatREFALB)

boxplotdat[paramname=="AUC",   paramname2 := "AUC"]
boxplotdat[paramname=="Clast", paramname2 := "C[last]"]
boxplotdat[paramname=="Cmax",  paramname2 := "C[max]"]

boxplotdat[, covname2 := factor(covname2, levels=unique(covname2))]
#boxplotdat[, covvalue := factor(covvalue, levels=unique(covvalue))]
boxplotdat[, covvalue := factor(covvalue,
  levels=c("56 kg", "72 kg", "40 g/L", "Male", "85 kg\nFemale\n45 g/L", "98 kg", "128 kg", "50 g/L"))]

pkparametersboxplot<- ggplot(boxplotdat, aes(x=covvalue, y=paramvalue))+
  facet_grid(paramname2 ~ covname2, scales="free", labeller=label_parsed,
             switch="both") +
  geom_boxplot() +
  labs(y="Parameter Values") +
  theme(axis.title=element_blank(),
        strip.placement = "outside")
pkparametersboxplot

Alternative View of the Data: Distributions and Intervals

Here we provide an alternative visual summary of the standardized PK parameters. It shows the distribution, quantiles of interest. It isolates each covariate effects in one panel keeping the reference on its own. It is exactly the same data as the boxplots. Which visual presentation do you prefer? Which one enables you to clearly see and compare the covariate effects?

out.df.univariatecov.nca[covname=="WT",      covname2 := "Weight"]
out.df.univariatecov.nca[covname=="ALB",     covname2 := "Albumin"]
out.df.univariatecov.nca[covname=="SEX",     covname2 := "Sex"]
out.df.univariatecov.nca[covname=="REF",     covname2 := "Reference"]
out.df.univariatecov.nca[paramname=="AUC",   paramname2 := "AUC"]
out.df.univariatecov.nca[paramname=="Clast", paramname2 := "C[last]"]
out.df.univariatecov.nca[paramname=="Cmax",  paramname2 := "C[max]"]

out.df.univariatecov.nca[, covvalue   := factor(covvalue, levels=unique(covvalue))]
out.df.univariatecov.nca[, covname2   := factor(covname2, levels=unique(covname2))]
out.df.univariatecov.nca[, paramname2 := factor(paramname2, levels=unique(paramname2))]

ggplot(out.df.univariatecov.nca[out.df.univariatecov.nca$covname!="REF",], aes(
    x      = paramvaluestd,
    y      = covvalue,
    fill   = factor(..quantile..),
    height = ..ndensity..)) +
  facet_grid(covname2 ~ paramname2,
    scales   = "free_y",
    space    = "free",
    labeller = label_parsed)+
  annotate("rect",
    xmin  = 0.8,
    xmax  = 1.25,
    ymin  = -Inf,
    ymax  = Inf,
    fill  = "gray",
    alpha = 0.4) +
  stat_density_ridges(
    geom           = "density_ridges_gradient",
    calc_ecdf      = TRUE,
    quantile_lines = TRUE,
    rel_min_height = 0.001,
    scale          = 0.9,
    quantiles      = c(0.05,0.5, 0.95)) +
  scale_x_continuous(
    breaks = c(0.25, 0.5, 0.8, 1/0.8, 1/0.5, 1/0.25),
    trans  = "log") +
  scale_fill_manual(
    name   = "Probability",
    values = c("white", "#0000FFA0", "#0000FFA0", "white"),
    labels = c("(0, 0.05]", "(0.05, 0.5]","(0.5, 0.95]", "(0.95, 1]")) +
  geom_vline(aes(xintercept=1), size=1) +
  theme_bw() +
  labs(x="Effects Relative to Parameter Reference Value", y="")+
  scale_x_continuous(breaks=c(0.25,0.5,0.8,1,1/0.8,1/0.5,1/0.25),
                     labels=c("1/4","1/2","0.8","1","1.25","2","4"),
                     trans ="log" )

Adding the BSV Ranges and Putting it all Together Using forest_plot

To contrast the covariate effects with random unexplained variability we add to the data the BSV intervals computed in an earlier section. We then do some data manipulation and formatting to produce a plot from the package function forest_plot. To simplify we will only keep AUC before revisiting more than one parameter plots at the end. The user can also compute an show the BSV for all presented effects not just for the reference. Refer to the approach that incorporate BSV and full covariate distributions presented in another vignette.

fpdata <- out.df.univariatecov.nca[,
  setNames(as.list(quantile(paramvaluestd, probs=c(0.5, 0.05, 0.95))), c("mid", "lower", "upper")),
  by=.(paramname2, covname2, covvalue)]

bsvranges[paramname=="AUC",   paramname2 := "AUC"]
bsvranges[paramname=="Clast", paramname2 := "C[last]"]
bsvranges[paramname=="Cmax",  paramname2 := "C[max]"]
setkey(bsvranges, paramname2)

fpdataBSV50 <- fpdata[covname2 == "Reference"]
fpdataBSV50$covname2 <- "BSV"
fpdataBSV50$covvalue <- "50% of patients"
setkey(fpdataBSV50, paramname2)

fpdataBSV50$lower    <- bsvranges[,"P25"]
fpdataBSV50$upper    <- bsvranges[,"P75"]

fpdataBSV90 <- fpdata[covname2 == "Reference"]
fpdataBSV90$covname2 <- "BSV"
fpdataBSV90$covvalue <- "90% of patients"
setkey(fpdataBSV90, paramname2)

fpdataBSV90$lower    <- bsvranges[,"P05"]
fpdataBSV90$upper    <- bsvranges[,"P95"]

fpdata <- rbind(fpdata, fpdataBSV90, fpdataBSV50)

fpdata[, LABEL := sprintf("%s [%s, %s]",
  round_pad(mid, 2),
  round_pad(lower, 2),
  round_pad(upper, 2)) ]

setnames(fpdata, "paramname2", "paramname")
setnames(fpdata, "covname2", "covname")
setnames(fpdata, "covvalue", "label")

fpdata[, label := factor(label, levels=unique(label))]

interval_legend_text <- "Median (points)\n90% CI (horizontal lines)"
interval_bsv_text    <- "BSV (points)\nPrediction Intervals (horizontal lines)"
ref_legend_text      <- "Reference (vertical line)\nClinically relevant limits\n(gray area)"
area_legend_text     <- "Reference (vertical line)\nClinically relevant limits\n(gray area)"

png("./Figure4_6.png",width =9 ,height = 6,units = "in",res=72)
coveffectsplot::forest_plot(fpdata[paramname=="AUC" & 
                                     covname!="Reference" &
                                     covname!="BSV",],
                            ref_area               = c(0.8, 1/0.8),
                            x_range                = c(0.5, 2),
                            strip_placement        = "inside",
                            base_size              = 18,
                            y_label_text_size      = 12,
                            y_facet_text_angle     = 0,
                            xlabel                 = "Fold Change Relative to Reference",
                            ref_legend_text        = ref_legend_text,
                            area_legend_text       = area_legend_text,
                            interval_legend_text   = interval_legend_text,
                            interval_bsv_text      = interval_bsv_text,
                            plot_title             = "",
                            facet_formula          = "covname ~ paramname",
                            facet_switch           = "y",
                            facet_scales           = "free_y",
                            facet_space            = "free",
                            paramname_shape        = FALSE,
                            table_position         = "right",
                            table_text_size        = 4,
                            plot_table_ratio       = 3,
                            show_table_facet_strip = "none",
                            logxscale              = TRUE,
                            major_x_ticks          = c(0.5, 0.8,1, 1/0.8, 1/0.5),
                            major_x_labels         = c("1/2", "0.8","1", "1.25", "2"),
                            return_list            = FALSE)
dev.off()
#> png 
#>   2
Covariate Effects Plot With BSV.
Covariate Effects Plot With BSV.

Customization of the Plots

In this section, we first show a forest_plot built-in theme, then how you return the ggplot objects as a list for further editing using regular ‘ggplot2’ code.

Using theme_benrich along Additional Options

This is achieved by setting theme_benrich = TRUE, specifying that you want no legend legend_position = "none".
With this theme active you can also control the table_title text and table_title_size arguments.

png("./coveffectsplot4.png",width =9 ,height = 6,units = "in",res=72)
coveffectsplot::forest_plot(fpdata[paramname=="AUC"],
                            ref_area = c(0.8, 1/0.8),
                            x_range = c(0.5,2),
                            xlabel = "Fold Change Relative to Reference",
                            x_label_text_size= 10,
                            y_facet_text_angle     = 0,
                            facet_formula = "covname~paramname",
                            theme_benrich = TRUE,
                            table_title_size = 15,
                            table_title = "Median [90% CI]",
                            interval_legend_text = interval_legend_text,
                            interval_bsv_text = interval_bsv_text,
                            legend_position = "none",
                            strip_placement = "outside",
                            base_size = 12,
                            facet_switch = "y",
                            facet_scales = "free_y",
                            facet_space = "free",
                            paramname_shape = FALSE,
                            table_position = "right",
                            table_text_size=4,
                            plot_table_ratio = 3,
                            show_table_facet_strip = "none",
                            logxscale = TRUE,
                            major_x_ticks =    c(0.25,0.5,0.8,1,1/0.8,1/0.5,1/0.25),
                            major_x_labels = c("1/4","1/2","0.8","1","1.25","2","4"),
                            return_list = FALSE)
dev.off()
#> png 
#>   2
Covariate Effects Plot Theme Ben Rich.
Covariate Effects Plot Theme Ben Rich.

Returning a List of ggplots

You can get the underlying ggplots as a list for further editing by setting return_list = TRUE and saving it into an object. The list will contain two objects the first being the main plot and the second the table. We illustrate how you can modify the look of the plots using regular ggplot code that modify the facet text color to gray and italic. Finally we recombine the plots using egg::ggarrange.

png("./coveffectsplot0.png",width = 9 ,height = 6,units = "in",res=72)
plotlists <- coveffectsplot::forest_plot(fpdata[paramname=="AUC"],
                            ref_area = c(0.8, 1/0.8),
                            xlabel = "Fold Change Relative to Reference",
                            ref_legend_text = "Reference (vertical line)\nClinically
                            relevant limits\n(gray area)",
                            area_legend_text = "Reference (vertical line)\nClinically
                            relevant limits\n(gray area)",
                            interval_legend_text = interval_legend_text,
                            plot_title             = "",
                            interval_bsv_text = interval_bsv_text,
                            facet_formula = "covname~paramname",
                            facet_switch = "y",
                            facet_scales = "free_y",
                            facet_space = "free",
                            paramname_shape = FALSE,
                            table_position = "right",
                            table_text_size=4,
                            plot_table_ratio = 4,
                            show_table_facet_strip = "none",
                            logxscale = TRUE,
                            major_x_ticks = c(0.25,0.5,0.8,1,1/0.8,1/0.5,1/0.25),
                            major_x_labels = c("1/4","1/2","0.8","1","1.25","2","4"),
                            return_list = TRUE)
plotlists
#> [[1]]
#> 
#> [[2]]
dev.off()
#> png 
#>   2
main_plot <- plotlists[[1]] + theme(
               panel.spacing=unit(10, "pt"),
               panel.grid=element_blank(),
               panel.grid.minor=element_blank(),
               legend.position="bottom",
               strip.placement.y="outside",
               strip.background.y=element_blank(),
               strip.text.y=element_text(
                   hjust=1,
                   vjust=1,
                   face="italic",color="gray",
                   size=rel(1)),
               legend.text = element_text(size=rel(0.5)),
               plot.margin = margin(t=0,r=0,b=0,l=5,unit="pt")) +
  scale_y_discrete(
breaks=c("90% of patients",
         "50% of patients",
         "85 kg\nFemale\n45 g/L",
         "40 g/L","50 g/L","Male",
         "56 kg","72 kg","98 kg","128 kg"
),
labels=c("90% of patients",
               "50% of patients",
               "85 kg-Female-45 g/L",
               "40 g/L","50 g/L","Male",
               "56 kg","72 kg","98 kg","128 kg"
)
  )

table_plot <- plotlists[[2]] + theme(
               panel.border=element_blank(),
               panel.spacing=unit(10, "pt"),
               strip.background.y=element_blank(),
               legend.text = element_text(size=rel(0.5)),
               plot.margin = margin(t=0,r=5,b=0,l=0,unit="pt"))

png("./coveffectsplot5.png",width =8.5 ,height = 6,units = "in",res=72)
egg::ggarrange(
  main_plot,
  table_plot,
  nrow = 1,
  widths = c(3, 1)
)
dev.off()
#> png 
#>   2
Customized Covariate Effects Plot.
Customized Covariate Effects Plot.

Plots with Multiple PK Parameters

You can also have plots with more than one PK parameter. You may want to facet by parameter, or to use different shape by parameter.

Facet by Parameter

This is achieved by setting paramname_shape = FALSE and facet_formula = "covname~paramname". We also suppress the table by using table_position = "none" and reduce the plot text sizes using base_size = 11.

png("./coveffectsplot6.png",width =9.5 ,height = 6,units = "in",res=72)
forest_plot(fpdata,
                            ref_area = c(0.8, 1/0.8),
                            x_range = c(0.5,2),
                            xlabel = "Fold Change Relative to Reference",
                            facet_formula = "covname~paramname",
                            interval_legend_text = interval_legend_text,
                            interval_bsv_text = interval_bsv_text,
                            facet_switch = "y",
                            facet_scales = "free_y",
                            facet_space = "free",
                            facet_labeller = "label_parsed",
                            paramname_shape = FALSE,
                            table_position = "none",
                            table_text_size=4,
                            base_size = 11,
                            plot_table_ratio = 4,
                            show_table_facet_strip = "none",
                            logxscale = TRUE,
                            major_x_ticks = c(0.5,0.8,1,1/0.8,1/0.5),
                            major_x_labels = c("1/2","0.8","1","1.25","2"),
                            x_label_text_size = 10,
                            return_list = FALSE)
dev.off()
#> png 
#>   2
Facet By Parameter Covariate Effects Plot.
Facet By Parameter Covariate Effects Plot.

Shape by Parameter

This is achieved by setting paramname_shape = TRUE we also illustrate how you can use legend_order to choose the legend ordering and few other options.

png("./coveffectsplot7.png",width =9.5 ,height = 6,units = "in",res=72)
forest_plot(fpdata[paramname!="AUC"],
                            ref_area = c(0.8, 1/0.8),
                            x_range = c(0.35,1/0.35),
                            xlabel = "Fold Change Relative to Reference",
            ref_legend_text = "Reference\nClinically relevant limits\n(0.8-1.25)",
            area_legend_text = "Reference\nClinically relevant limits\n(0.8-1.25)",
            interval_legend_text = "Median\n90% CI",
            interval_bsv_text = "BSV\nPrediction Intervals", 
                            facet_formula = "covname~.",
                            paramname_shape = TRUE,
            legend_order =c("shape","pointinterval","ref", "area"),
                            legend_shape_reverse = TRUE,
                            bsv_col = scales::muted("red"),
                            interval_col = scales::muted("blue"),
                            facet_switch = "y",
                            facet_scales = "free_y",
                            facet_space = "free",
                            table_position = "none",
                            table_text_size=4,
                            base_size = 9,
                            plot_table_ratio = 4,
                            show_table_facet_strip = "none",
                            logxscale = TRUE,
                            major_x_ticks = c(0.5,0.8,1,1/0.8,1/0.5),
                            major_x_labels = c("1/2","0.8","1","1.25","2"),
                            legend_space_x_mult = 0.01,
                            legend_position = "right",
                            return_list = FALSE)
dev.off()
#> png 
#>   2
Shape By Parameter Covariate Effects Plot.
Shape By Parameter Covariate Effects Plot.

Color by Parameter

This is achieved by setting paramname_color = TRUE (on top of paramname_shape = TRUE or not) and the the user can then pass a vector of colors in the interval_col argument

png("./coveffectsplot_color.png",width =9.5 ,height = 6,units = "in",res=72)
forest_plot(fpdata[paramname!="AUC" &
                     covname!="BSV"&
                     covname!="Reference",],
                            ref_area = c(0.8, 1/0.8),
                            x_range = c(0.35,1/0.35),
                            xlabel = "Fold Change Relative to Reference",
            ref_legend_text = "Reference\nClinically relevant limits\n(0.8-1.25)",
            area_legend_text = "Reference\nClinically relevant limits\n(0.8-1.25)",
                            facet_formula = "covname~.",
                            paramname_shape = TRUE,
                            paramname_color = TRUE,
            combine_interval_shape_legend = TRUE,
            legend_order =c("shape","pointinterval","ref", "area"),
                            legend_shape_reverse = TRUE,
                            bsv_col = scales::muted("red"),
                            facet_switch = "y",
                            facet_scales = "free_y",
                            facet_space = "free",
                            table_position = "none",
                            base_size = 12,
                            logxscale = TRUE,
                            major_x_ticks = c(0.5,0.8,1,1/0.8,1/0.5),
                            major_x_labels = c("1/2","0.8","1","1.25","2"),
                            legend_space_x_mult = 0.01,
                            legend_position = "right",
                            return_list = TRUE)[[1]]+
  scale_color_manual(labels = c(expression(C[last]),expression(C[max])),
                       values = c(scales::muted("blue"),scales::muted("red")))+
  scale_shape_discrete(labels = c(expression(C[last]),expression(C[max])))

dev.off()
#> png 
#>   2
Color By Parameter Covariate Effects Plot.
Color By Parameter Covariate Effects Plot.

While we covered varying one at a time covariate value (marginal effects), we can use observed or simulated distribution of correlated covariates and simulate joint covariate effects as illustrated in the Pediatric Application vignette.It can be misleading to show the BSV around the reference only as it operates at all levels of covariate as such we recommend to fully represent the intervals with BSV and Uncertainty at all levels / covariate splits (full Distribution PK example vignette.)

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.