Beta-binomial distribution
The beta-binomial distribution is useful when we wish to incorporate
additional variation into the probability parameter of the binomial
distribution, \(p\). It accomplishes
this by drawing \(p\) from a beta
distribution. The parameters of the beta-binomial are the number of
trials, \(n\), and the shape parameters
of the beta distribution, \(\alpha\)
and \(\beta\).
The likelihood of the beta-binomial can be described as follows:
\[P(x | n, \alpha, \beta) = \frac{\Gamma(n +
1)}{\Gamma(x + 1)\Gamma(n - x + 1)}
\frac{\Gamma(x + \alpha) \Gamma(n - x + \beta)}{\Gamma(n + \alpha +
\beta)}
\frac{\Gamma(\alpha + \beta)}{\Gamma(\alpha) \Gamma(\beta)},\]
where \(x\) is a natural number \(≤ n\), \(\alpha\) and \(\beta\) are \(>0\), and where \(\Gamma()\) represents the gamma
function.
The log-likelihood is:
\[\log(P(x | n, \alpha, \beta)) =
\log(\Gamma(n + 1)) - \log(\Gamma(x + 1)) - \log(\Gamma(n - x + 1)) +
\log(\Gamma(x + \alpha)) + \\ \log(\Gamma(n - x + \beta)) -
\log(\Gamma(n + \alpha + \beta)) +
\log(\Gamma(\alpha + \beta)) - \log(\Gamma(\alpha)) -
\log(\Gamma(\beta)).\]
The expected value of the beta-binomial distribution is \(n \cdot \frac{\alpha}{\alpha + \beta}\).
This is the same as the expected value of the binomial distribution
(\(n \cdot p\)), with the \(p\) replaced by the expected value of the
beta distribution, \(\frac{\alpha}{\alpha +
\beta}\).
A parameterization frequently used for the beta-binomial distribution
uses this expected probability (\(p\))
as a parameter, with a dispersion parameter (\(\theta\)) that specifies the variance in
the probability. Our particular parameterization of \(\theta\) is slightly unconventional, but
has useful properties when modelling. When \(\theta = 0\), the beta-binomial reverts to
the binomial distribution. When \(\theta =
1\) and \(p = 0.5\), the
parameters of the beta distribution become \(\alpha = 1\) and \(\beta = 1\), which correspond to a uniform
distribution for the beta-binomial probability parameter.
The relationships between \(p\) and
\(\theta\) and \(\alpha\) and \(\beta\) are defined as follows:
\[p = \frac{\alpha}{\alpha + \beta}\]
\[\theta = \frac{2}{\alpha +
\beta}\]
\[\alpha = 2\cdot\frac{p}{\theta}\]
\[\beta = 2\cdot\frac{1 -
p}{\theta}\]
Deviance:
Recall that the likelihood of a model is the probability of the data
set given the model (\(P(\text{data}|\text{model})\)). The
deviance of a model, \(D\), is
defined by: \[D(\text{model},\text{data}) =
2(\log(P(\text{data}|\text{saturated model})) -
\log(P(\text{data}|\text{fitted model}))),\] where the saturated
model is the model that perfectly fits the data.
The saturated model usually uses the value of \(x\) in place of the mean parameter, thereby
fitting through the data points. For example, calculating the saturated
log-likelihood of the normal distribution involves using the \(x\) value(s) in place of the mean parameter
\(\mu\) in the log-likelihood. Recall
from above that the expected value of the binomial distribution is \(n \cdot p\). Since \(n\) is fixed in the binomial distribution,
\(p = \frac{x}{n}\) is used to
calculate the saturated log-likelihood.
In the case of the beta-binomial distribution, there is some
confusion about what should be used as the saturated model. One
suggested approach is to use the saturated log-likelihood of the
binomial distribution, as described above, effectively setting the \(\theta\) dispersion term to 0. A second
suggested approach is to use the same method as described for the
binomial distribution (i.e., replacing \(p\) with \(\frac{x}{n}\)), and holding the \(\theta\) value constant. Both of these
approaches have issues.
The problem with the first approach is that likelihood profile of the
beta-binomial becomes increasingly dispersed relative to the binomial as
\(\theta\) increases (Fig. 1).
Consequently, increasing \(\theta\)
increases the deviance even if the expected value of the fitted model is
the same as the saturated binomial model.
Fig. 1: Beta-binomial likelihood profile for
\(x = 1\) and \(n = 5\), for different values of \(\theta\). \(\theta = 0\) corresponds to the binomial
case.
The problem with the second approach is that for some combinations of
\(p\) and \(\theta\), the resultant deviance values are
negative. This is an issue for two reasons. Firstly, it is nonsensical
because by definition the saturated model should be the best possible
fit to the data. Secondly, it is computationally problematic, because
calculating deviance residuals, as we will do in the next section,
involves taking the square root of the deviance.
Here is an example of a case where the deviance is negative. Using
\(x = 1\), \(n = 5\), \(p =
0.3\), and \(\theta = 0.5\), we
calculate the saturated log-likelihood:
\[\alpha_{sat} = \frac{2
(\frac{x}{n})}{\theta} = \frac{2(0.3)}{0.5} = 0.8\] \[\beta_{sat} = \frac{2 (1 - \frac{x}{n})}{\theta}
= \frac{2 (1 - 0.3)}{0.5} = 3.2\]
\[ \log(P(x|n, p_{sat}, \theta_{sat}) =
-1.355106,\]
the fitted log-likelihood:
\[\alpha_{fit} = \frac{2 (p)}{\theta} =
\frac{2(0.3)}{0.5} = 1.2\] \[\beta_{fit} = \frac{2 (1 - p)}{\theta} = \frac{2
(1 - 0.3}{0.5} = 2.8\]
\[\log(P(x|n, p_{fit}, \theta_{fit})) =
-1.32999,\]
and finally, the deviance:
\[\begin{aligned}
D(n, p, \theta, x) &= 2(\log(P(x|n, p_{sat}, \theta_{sat})) -
\log(P(x|n, p_{fit}, \theta_{fit}))) \\
&= 2(-1.355106 - -1.32999) \\
&= -0.050232.
\end{aligned}\]
In summary, the deviance is negative because the likelihood at the
expected value, \(p = \frac{x}{n}\) is
less than the likelihood of the observed value (Fig. 2).
The solution to the problem appears to be to choose the value of
\(p\) that maximizes the likelihood.
However, the beta-binomial distribution has closed-form solutions only
for certain values of \(\alpha\) and
\(\beta\). Thus, we must generally
search for the value of \(p\) that
maximizes the likelihood for each data point in order to calculate the
saturated log-likelihood. We will refer to the optimized \(p\) value for the \(i^{th}\) data point as \(p_i^*\), and generally as \(p^*\). We use \(p^*\) to calculate the saturated
log-likelihood that produces deviances that are (a) strictly positive,
and (b) relative to the value of \(\theta\). The value of \(p_i^*\) for the example case with \(x = 1\), \(n =
5\), and \(\theta = 0.5\) is
shown in Figure 2.
Fig. 2: Beta-binomial likelihood profile for
\(x = 1\), \(n = 5\), and \(\theta = 0.5\). The dashed vertical line
shows the likelihood at the expected value of the beta-binomial
distribution (\(n \cdot p\)) where
\(p = \frac{x}{n} = \frac{1}{5} =
0.2\). As you can see, this is not the \(p\) for which the likelihood is maximized.
The solid vertical line shows the likelihood at its maximum point. In
this case, \(p^* = 0.26\).
Deviance residuals
The unit deviance, \(d_i\) refers to
the deviance for the \(i^{th}\) data
point, \(x_i\):
\[d_i = 2(\log(P(x_i|n, p_i^*, \theta)) -
\log(P(x_i|n, p, \theta))).\] The deviance residual is
the signed squared root of the unit deviance,
\[r_i = \text{sign}(x_i - (n p_i^*))
\sqrt{d_i}.\] The following plot shows histograms of deviance
residuals for 10,000 randomly generated data points with \(n = 50\) and various values of \(p\) and \(\theta\).
Fig. 4: Histograms of deviance residuals for
10,000 beta-binomial data points simulated with \(n = 50\), \(p =
\{0.3, 0.5, 0.9 \}\), and \(\theta =
\{0.0, 0.1, 0.5, 1.0 \}\). The percentages within each panel
(i.e., each combination of \(p\) and
\(\theta\)) sum to 100%.
Recall that \(\theta = 0\) refers to
the binomial case. When \(p = 0.5\) and
\(\theta > 0\), deviance residuals
close to 0 become less common; as \(\theta\) increases, the distribution of
deviance residuals becomes less continuous (Fig. 4). When \(p\) deviates from \(0.5\) and \(\theta > 0\), the distribution of the
deviance residuals becomes increasingly skewed and discontinuous (Fig.
4).
Due to the skewed and discontinuous nature of the distribution of the
deviance residuals, the goodness of fit of a beta-binomial model cannot
be assessed from the deviance residuals alone but must be evaluated
using posterior predictive checking.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.