The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

farver

R-CMD-check CRAN_Status_Badge CRAN_Download_Badge Codecov test coverage

The goal of farver is to provide very fast, vectorised functions for conversion of colours between different colour spaces, colour comparisons (distance between colours), encoding/decoding, and channel manipulation in colour strings. To this end it provides an interface to a modified version of the ColorSpace C++ library developed by Berendea Nicolae.

Installation

farver can be installed from CRAN using install.packages('farver'). The development version can be installed from Github using devtools:

# install.packages('devtools')
devtools::install_github('thomasp85/farver')

Use

farver provides an alternative to the grDevices::rgb() and grDevices::col2rgb() for encoding and decoding colours strings. The farver functions are superficially equivalent but provides a uniform output format, and the option to encode and decode directly from/to other colour spaces.

library(farver)

codes <- rainbow(10)
codes
#>  [1] "#FF0000" "#FF9900" "#CCFF00" "#33FF00" "#00FF66" "#00FFFF" "#0066FF"
#>  [8] "#3300FF" "#CC00FF" "#FF0099"

spectrum <- decode_colour(codes)
spectrum
#>         r   g   b
#>  [1,] 255   0   0
#>  [2,] 255 153   0
#>  [3,] 204 255   0
#>  [4,]  51 255   0
#>  [5,]   0 255 102
#>  [6,]   0 255 255
#>  [7,]   0 102 255
#>  [8,]  51   0 255
#>  [9,] 204   0 255
#> [10,] 255   0 153

encode_colour(spectrum)
#>  [1] "#FF0000" "#FF9900" "#CCFF00" "#33FF00" "#00FF66" "#00FFFF" "#0066FF"
#>  [8] "#3300FF" "#CC00FF" "#FF0099"

It also provides an alternative to grDevices::convertColor() to switch between colours spaces. If the origin is a colour string it is possible to decode directly into the given colour space. Conversely, if the endpoint is a colour string it is also possible to encode directly from a given colour space.

spectrum_lab <- convert_colour(spectrum, 'rgb', 'lab')
spectrum_lab
#>              l         a          b
#>  [1,] 53.24079  80.09796   67.20432
#>  [2,] 72.26072  30.17136   77.22610
#>  [3,] 93.60533 -41.93879   90.27635
#>  [4,] 88.07403 -83.10282   83.59544
#>  [5,] 88.19634 -80.27407   57.92961
#>  [6,] 91.11322 -48.08151  -14.12690
#>  [7,] 47.90478  35.20130  -82.00196
#>  [8,] 33.81896  79.70472 -105.27489
#>  [9,] 51.90416  91.00028  -74.83009
#> [10,] 55.65103  86.53436   -9.71618

decode_colour(codes, to = 'lab')
#>              l         a          b
#>  [1,] 53.24079  80.09796   67.20432
#>  [2,] 72.26072  30.17136   77.22610
#>  [3,] 93.60533 -41.93879   90.27635
#>  [4,] 88.07403 -83.10282   83.59544
#>  [5,] 88.19634 -80.27407   57.92961
#>  [6,] 91.11322 -48.08151  -14.12690
#>  [7,] 47.90478  35.20130  -82.00196
#>  [8,] 33.81896  79.70472 -105.27489
#>  [9,] 51.90416  91.00028  -74.83009
#> [10,] 55.65103  86.53436   -9.71618

encode_colour(spectrum_lab, from = 'lab')
#>  [1] "#FF0000" "#FF9900" "#CCFF00" "#33FF00" "#00FF66" "#00FFFF" "#0066FF"
#>  [8] "#3300FF" "#CC00FF" "#FF0099"

If colours are given as strings, manipulation of channels will normally require decoding, conversion to the correct colour space, manipulation of the given channel, converting back to rgb and the encoding to string. farver provides a range of functions that allow you to change any channel in the supported spaces directly in colour strings:

# Add a value to the channel
add_to_channel(codes, channel = 'l', value = 1:10, space = 'lab')
#>  [1] "#FF0C03" "#FF9E0E" "#D5FF1C" "#48FF20" "#33FF74" "#3CFFFF" "#3D77FF"
#>  [8] "#5A25FF" "#E839FF" "#FF41B4"

# Set a channel to a specific value
set_channel(codes, 'alpha', c(0.3, 0.7))
#>  [1] "#FF00004C" "#FF9900B2" "#CCFF004C" "#33FF00B2" "#00FF664C" "#00FFFFB2"
#>  [7] "#0066FF4C" "#3300FFB2" "#CC00FF4C" "#FF0099B2"

# Limit a channel to a given value
cap_channel(codes, 'r', 200)
#>  [1] "#C80000" "#C89900" "#C8FF00" "#33FF00" "#00FF66" "#00FFFF" "#0066FF"
#>  [8] "#3300FF" "#C800FF" "#C80099"

Lastly, farver also provides utilities for calculating the distance between colours, based on a range of different measures

spectrum2 <- t(col2rgb(heat.colors(10)))

compare_colour(spectrum, spectrum2, 'rgb', method = 'cie2000')[1:6, 1:6]
#>          [,1]     [,2]      [,3]     [,4]     [,5]     [,6]
#> [1,]  0.00000  1.95065  7.130898 15.53837 27.08237 39.88958
#> [2,] 29.50083 27.56585 22.402612 13.98117  2.41602 10.31341
#> [3,] 72.33606 70.32974 64.926436 55.98592 43.59987 30.24747
#> [4,] 85.84698 83.68842 77.854648 68.19997 55.06314 41.59064
#> [5,] 85.92110 83.79762 78.073545 68.67184 56.07682 43.42965
#> [6,] 70.95853 69.55274 65.907013 60.35739 53.72218 47.94387

Supported colour spaces

farver currently supports the following colour spaces:

Supported distance measures

farver supports the following colour distance metrics

White References

farver allows you to set the white point for relative colour spaces, either based on a standard illuminant (A-F series supported) or by specifying chromaticity coordinates or tristimulus values directly

Benchmark

farver is faster than its grDevices counterpart but less so than it was at its first release, as the colour conversion in grDevices has been improved since.

library(ggplot2)
test <- matrix(runif(300000, min = 0, max = 255), ncol = 3)
timing <- bench::mark(
  farver = convert_colour(test, 'rgb', 'lab'),
  grDevices = convertColor(test, 'sRGB', 'Lab', scale.in = 255), 
  check = FALSE,
  min_iterations = 100
)
#> Warning: Some expressions had a GC in every iteration; so filtering is disabled.
plot(timing, type = 'ridge')

Still, if the start- and/or endpoint are colour strings the ability to decode and encode directly from/to any colour space will give a huge speed up.

colour_strings <- colours()
timing <- bench::mark(
  farver = decode_colour(colour_strings, to = 'lab'),
  grDevices = convertColor(t(col2rgb(colour_strings)), 'sRGB', 'Lab', scale.in = 255), 
  check = FALSE,
  min_iterations = 100
)
plot(timing, type = 'ridge')

Code of Conduct

Please note that the ‘farver’ project is released with a Contributor Code of Conduct. By contributing to this project, you agree to abide by its terms.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.