The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
parametric_effects()
slightly escaped the great
renaming that happened for 0.9.0. Columns type
and
term
did not gain a prefix .
. This is now
rectified and these two columns are now .type
and
.term
.Plots of random effects are now labelled with their smooth label.
Previously, the title was taken fro the variable involved in the smooth,
but this doesn’t work for terms like
s(subject, continuous_var, bs = "re")
for random slopes,
which previsouly would have the title "subject"
. Now such
terms will have title "s(subject,continuous_var)"
. Simple
random intercept terms, s(subject, bs = "re")
, are now
titled "s(subject)"
. #287
The vignettes
custom-plotting.Rmd
, andposterior-simulation.Rmd
were moved to
vignettes/articles
and thus are no longer available as
package vignettes. Instead, they are accessible as Articles through the
package website: https://gavinsimpson.github.io/gratia/fitted_samples()
now works for gam()
models with multiple linear predictors, but currently only the location
parameter is supported. The parameter is indicated through a new
variable .parameter
in the returned object.partial_residuals()
was computing partial residuals
from the deviance residuals. For compatibility with
mgcv::plot.gam()
, partial residuals are now computed from
the working residuals. Reported by @wStockhausen #273
appraise()
was not passing the ci_col
argument on qq_plot()
and worm_plot()
.
Reported by Sate Ahmed.
Couldn’t pass mvn_method
on to posterior sampling
functions from user facing functions fitted_samples()
,
posterior_samples()
, smooth_samples()
,
derivative_samples()
, and
repsonse_derivatives()
. Reported by @stefgehrig #279
fitted_values()
works again for quantile GAMs fitted
by qgam()
.
confint.gam()
was not applying shift
to
the estimate and upper and lower interval. #280 reported by @TIMAVID & @rbentham
parametric_effects()
and
draw.parametric_effects()
would forget about the levels of
factors (intentionally), but this would lead to problems with ordered
factors where the ordering of levels was not preserved. Now,
parametric_effects()
returns a named list of factor levels
as attribute "factor_levels"
containing the required
information and the order of levels is preserved when plotting. #284
Reported by @mhpob
parametric_effects()
would fail if there were
parametric terms in the model but they were all interaction terms (which
we don’t currently handle). #282
Many functions now return objects with different named variables.
In order to avoid clashes with variable names used in user’s models or
data, a period (.
) is now being used as a prefix for
generated variable names. The functions whose names have changed are:
smooth_estimates()
, fitted_values()
,
fitted_samples()
, posterior_samples()
,
derivatives()
, partial_derivatives()
, and
derivative_samples()
. In addition,
add_confint()
also adds newly-named variables.
1. `est` is now `.estimate`,
2. `lower` and `upper` are now `.lower_ci` and `.upper_ci`,
3. `draw` and `row` and now `.draw` and `.row` respectively,
4. `fitted`, `se`, `crit` are now `.fitted`, `.se`, `.crit`, respectively
5. `smooth`, `by`, and `type` in `smooth_estimates()` are now `.smooth`,
`.by`, `.type`, respectively.
derivatives()
and partial_derivatives()
now work more like smooth_estimates()
; in place of the
var
and data
columns, gratia now
stores the data variables at which the derivatives were evaluated as
columns in the object with their actual variable names.
The way spline-on-the-sphere (SOS) smooths
(bs = "sos"
) are plotted has changed to use
ggplot2::coord_sf()
instead of the previously-used
ggplot2::coord_map()
. This changed has been made as a
result of coord_map()
being soft-deprecated (“superseded”)
for a few minor versions of ggplot2 by now already, and changes to the
guides system in version 3.5.0 of ggplot2.
The axes on plots created with coord_map()
never really
worked correctly and changing the angle of the tick labels never worked.
As coord_map()
is superseded, it didn’t receive the updates
to the guides system and a side effect of these changes, the code that
plotted SOS smooths was producing a warning with the release of ggplot2
version 3.5.0.
The projection settings used to draw SOS smooths was previously
controlled via arguments projection
and
orientation
. These arguments do not affect
ggplot2::coord_sf()
, Instead the projection used is
controlled through new argument crs
, which takes a PROJ
string detailing the projection to use or an integer that refers to a
known coordinate reference system (CRS). The default projection used is
+proj=ortho +lat_0=20 +lon_0=XX
where XX
is
the mean of the longitude coordinates of the data points.
evaluate_smooth()
was deprecated in gratia version
0.7.0. This function and all it’s methods have been removed from the
package. Use smooth_estimates()
instead.The following functions were deprecated in version 0.9.0 of gratia. They will eventually be removed from the package as part of a clean up ahead of an eventual 1.0.0 release. These functions will become defunct by version 0.11.0 or 1.0.0, whichever is released soonest.
evaluate_parametric_term()
has been deprecated. Use
parametric_effects()
instead.
datagen()
has been deprecated. It never really did
what it was originally designed to do, and has been replaced by
data_slice()
.
To make functions in the package more consistent, the arguments
select
, term
, and smooth
are all
used for the same thing and hence the latter two have been deprecated in
favour of select
. If a deprecated argument is used, a
warning will be issued but the value assigned to the argument will be
assigned to select
and the function will continue.
smooth_samples()
now uses a single call to the RNG
to generate draws from the posterior of smooths. Previous to version
0.9.0, smooth_samples()
would do a separate call to
mvnfast::rmvn()
for each smooth. As a result, the result of
a call to smooth_samples()
on a model with multiple smooths
will now produce different results to those generated previously. To
regain the old behaviour, add rng_per_smooth = TRUE
to the
smooth_samples()
call.
Note, however, that using per-smooth RNG calls with
method = "mh"
will be very inefficient as, with that
method, posterior draws for all coefficients in the model are sampled at
once. So, only use rng_per_smooth = TRUE
with
method = "gaussian"
.
The output of smooth_estimates()
and its
draw()
method have changed for tensor product smooths that
involve one or more 2D marginal smooths. Now, if no covariate values are
supplied via the data
argument,
smooth_estimates()
identifies if one of the marginals is a
2d surface and allows the covariates involved in that surface to vary
fastest, ahead of terms in other marginals. This change has been made as
it provides a better default when nothing is provided to
data
.
This also affects draw.gam()
.
fitted_values()
now has some level of support for
location, scale, shape families. Supported families are
mgcv::gaulss()
, mgcv::gammals()
,
mgcv::gumbls()
, mgcv::gevlss()
,
mgcv::shash()
, mgcv::twlss()
, and
mgcv::ziplss()
.
gratia now requires dplyr versions >= 1.1.0 and tidyselect >= 1.2.0.
A new vignette Posterior Simulation is available, which describes how to do posterior simulation from fitted GAMs using {gratia}.
Soap film smooths using basis bs = "so"
are now
handled by draw()
, smooth_estimates()
etc.
#8
response_derivatives()
is a new function for
computing derivatives of the response with respect to a (continuous)
focal variable. First or second order derivatives can be computed using
forward, backward, or central finite differences. The uncertainty in the
estimated derivative is determined using posterior sampling via
fitted_samples()
, and hence can be derived from a Gaussian
approximation to the posterior or using a Metropolis Hastings sampler
(see below.)
derivative_samples()
is the work horse function
behind response_derivatives()
, which computes and returns
posterior draws of the derivatives of any additive combination of model
terms. Requested by @jonathanmellor #237
data_sim()
can now simulate response data from
gamma, Tweedie and ordered categorical distributions.
data_sim()
gains two new example models
"gwf2"
, simulating data only from Gu & Wabha’s
f2 function, and "lwf6"
, example function 6 from
Luo & Wabha (1997 JASA 92(437), 107-116).
data_sim()
can also simulate data for use with GAMs
fitted using family = gfam()
for grouped families where
different types of data in the response are handled. #266 and part of
#265
fitted_samples()
and smooth_samples()
can now use the Metropolis Hastings sampler from
mgcv::gam.mh()
, instead of a Gaussian approximation, to
sample from the posterior distribution of the model or specific smooths
respectively.
posterior_samples()
is a new function in the family
of fitted_samples()
and smooth_samples()
.
posterior_samples()
returns draws from the posterior
distribution of the response, combining the uncertainty in the estimated
expected value of the response and the dispersion of the response
distribution. The difference between posterior_samples()
and predicted_samples()
is that the latter only includes
variation due to drawing samples from the conditional distribution of
the response (the uncertainty in the expected values is ignored), while
the former includes both sources of uncertainty.
fitted_samples()
can new use a matrix of
user-supplied posterior draws. Related to #120
add_fitted_samples()
,
add_predicted_samples()
,
add_posterior_samples()
, and
add_smooth_samples()
are new utility functions that add the
respective draws from the posterior distribution to an existing data
object for the covariate values in that object:
obj |> add_posterior_draws(model)
. #50
basis_size()
is a new function to extract the basis
dimension (number of basis functions) for smooths. Methods are available
for objects that inherit from classes "gam"
,
"gamm"
, and "mgcv.smooth"
(for individual
smooths).
data_slice()
gains a method for data frames and
tibbles.
typical_values()
gains a method for data frames and
tibbles.
fitted_values()
now works with models fitted using
the mgcv::ocat()
family. The predicted probability for each
category is returned, alongside a Wald interval created using the
standard error (SE) of the estimated probability. The SE and estimated
probabilities are transformed to the logit (linear predictor) scale, a
Wald credible interval is formed, which is then back-transformed to the
response (probability) scale.
fitted_values()
now works for GAMMs fitted using
mgcv::gamm()
. Fitted (predicted) values only use the GAM
part of the model, and thus exclude the random effects.
link()
and inv_link()
work for models
fitted using the cnorm()
family.
A worm plot can now be drawn in place of the QQ plot with
appraise()
via new argument use_worm = TRUE
.
#62
smooths()
now works for models fitted with
mgcv::gamm()
.
overview()
now returns the basis dimension for each
smooth and gains an argument stars
which if
TRUE
add significance stars to the output plus a legend is
printed in the tibble footer. Part of wish of @noamross #214
New add_constant()
and transform_fun()
methods for smooth_samples()
.
evenly()
gains arguments lower
and
upper
to modify the lower and / or upper bound of the
interval over which evenly spaced values will be generated.
add_sizer()
is a new function to add information on
whether the derivative of a smooth is significantly changing (where the
credible interval excludes 0). Currently, methods for
derivatives()
and smooth_estimates()
objects
are implemented. Part of request of @asanders11 #117
draw.derivatives()
gains arguments
add_change
and change_type
to allow
derivatives of smooths to be plotted with indicators where the credible
interval on the derivative excludes 0. Options allow for periods of
decrease or increase to be differentiated via
change_type = "sizer"
instead of the default
change_type = "change"
, which emphasises either type of
change in the same way. Part of wish of @asanders11 #117
draw.gam()
can now group factor by smooths for a
given factor into a single panel, rather than plotting the smooths for
each level in separate panels. This is achieved via new argument
grouped_by
. Requested by @RPanczak #89
draw.smooth_estimates()
can now also group factor by
smooths for a given factor into a single panel.
The underlying plotting code used by
draw_smooth_estimates()
for most univariate smooths can now
add change indicators to the plots of smooths if those change indicators
are added to the object created by smooth_estimates()
using
add_sizer()
. See the example in
?draw.smooth_estimates
.
smooth_estimates()
can, when evaluating a 3D or 4D
tensor product smooth, identify if one or more 2D smooths is a marginal
of the tensor product. If users do not provide covariate values at which
to evaluate the smooths, smooth_estimates()
will focus on
the 2D marginal smooth (or the first if more than one is involved in the
tensor product), instead of following the ordering of the terms in the
definition of the tensor product. #191
For example, in
te(z, x, y, bs = c(cr, ds), d = c(1, 2))
, the second
marginal smooth is a 2D Duchon spline of covariates x
and
y
. Previously, smooth_estimates()
would have
generated n
values each for z
and
x
and n_3d
values for y
, and then
evaluated the tensor product at all combinations of those generated
values. This would ignore the structure implicit in the tensor product,
where we are likely to want to know how the surface estimated by the
Duchon spline of x
and y
smoothly varies with
z
. Previously smooth_estimates()
would
generate surfaces of z
and x
, varying by
y
. Now, smooth_estimates()
correctly
identifies that one of the marginal smooths of the tensor product is a
2D surface and will focus on that surface varying with the other terms
in the tensor product.
This improved behaviour is needed because in some bam()
models it is not always possible to do the obvious thing and reorder the
smooths when defining the tensor product to be
te(x, y, z, bs = c(ds, cr), d = c(2, 1))
. When
discrete = TRUE
is used with bam()
the terms
in the tensor product may get rearranged during model setup for maximum
efficiency (See Details in ?mgcv::bam
).
Additionally, draw.gam()
now also works the same
way.
New function null_deviance()
that extracts the null
deviance of a fitted model.
draw()
, smooth_estimates()
,
fitted_values()
, data_slice()
, and
smooth_samples()
now all work for models fitted with
scam::scam()
. Where it matters, current support extends
only to univariate smooths.
generate_draws()
is a new low-level function for
generating posterior draws from fitted model coefficients.
generate_daws()
is an S3 generic function so is extensible
by users. Currently provides a simple interface to a simple Gaussian
approximation sampler (gaussian_draws()
) and the simple
Metropolis Hasting sample (mh_draws()
) available via
mgcv::gam.mh()
. #211
smooth_label()
is a new function for extracting the
labels ‘mgcv’ creates for smooths from the smooth object
itself.
penalty()
has a default method that works with
s()
, te()
, t2()
, and
ti()
, which create a smooth specification.
transform_fun()
gains argument constant
to allow for the addition of a constant value to objects (e.g. the
estimate and confidence interval). This enables a single
obj |> transform_fun(fun = exp, constant = 5)
instead of
separate calls to add_constant()
and then
transform_fun()
. Part of the discussion of #79
model_constant()
is a new function that simply
extracts the first coefficient from the estimated model.
link()
, inv_link()
, and related family
functions for the ocat()
weren’t correctly identifying the
family name and as a result would throw an error even when passed an
object of the correct family.
link()
and inv_link()
now work correctly
for the betar()
family in a fitted GAM.
The print()
method for lp_matrix()
now
converts the matrix to a data frame before conversion to a tibble. This
makes more sense as it results in more typical behaviour as the columns
of the printed object are doubles.
Constrained factor smooths (bs = "sz"
) where the
factor is not the first variable mentioned in the smooth
(i.e. s(x, f, bs = "sz")
for continuous x
and
factor f
) are now plotable with draw()
.
#208
parametric_effects()
was unable to handle special
parametric terms like poly(x)
or log(x)
in
formulas. Reported by @fhui28 #212
parametric_effects()
now works better for location,
scale, shape models. Reported by @pboesu #45
parametric_effects
now works when there are missing
values in one or more variables used in a fitted GAM. #219
response_derivatives()
was incorrectly using
.data
with tidyselect selectors.
typical_values()
could not handle logical variables
in a GAM fit as mgcv stores these as numerics in the
var.summary
. This affected evenly()
and
data_slice()
. #222
parametric_effects()
would fail when two or more
ordered factors were in the model. Reported by @dsmi31 #221
Continuous by smooths were being evaluated with the median value
of the by
variable instead of a value of 1. #224
fitted_samples()
(and hence
posterior_samples()
) now handles models with offset terms
in the formula. Offset terms supplied via the offset
argument are ignored by mgcv:::predict.gam()
and hence are
ignored also by gratia
. Reported by @jonathonmellor #231 #233
smooth_estimates()
would fail on a "fs"
smooth when a multivariate base smoother was used and the
factor was not the last variable specified in the definition of the
smooth: s(x1, x2, f, bs = "fs", xt = list(bs = "ds"))
would
work, but s(f, x1, x2, bs = "fs", xt = list(bs = "ds"))
(or
any ordering of variables that places the factor not last) would emit an
obscure error. The ordering of the terms involved in the smooth now
doesn’t matter. Reported by @chrisaak #249.
draw.gam()
would fail when plotting a multivariate
base smoother used in an "sz"
smooth. Now, this use case is
identified and a message printed indicating that (currently) gratia
doesn’t know how to plot such a smooth. Reported by @chrisaak #249.
draw.gam()
would fail when plotting a multivariate
base smoother used in an "fs"
smooth. Now, this use case is
identified and a message printed indicating that (currently) gratia
doesn’t know how to plot such a smooth. Reported by @chrisaak #249.
derivative_samples()
would fail with
order = 2
and was only computing forward finite
differences, regardless of type
for order = 1
.
Partly reported by @samlipworth #251.
The draw()
method for penalty()
was
normalizing the penalty to the range 0–1, not the claimed and documented
-1–1 with argument normalize = TRUE
. This is now
fixed.
smooth_samples()
was failing when data
was supplied that contained more variables than were used in the smooth
that was being sampled. Hence this generally fail unless a single smooth
was being sampled from or the model contained only a single smooth. The
function never intended to retain all the variables in data
but was written in such a way that it would fail when relocating the
data columns to the end of the posterior sampling object. #255
draw.gam()
and draw.smooth_estimates()
would fail when plotting a univariate tensor product smooth
(e.g. te(x)
, ti(x)
, or t2()
).
Reported by @wStockhausen #260
plot.smooth()
was not printing the factor level in
subtitles for ordered factor by smooths.
smooth_samples()
now returns objects with variables
involved in smooths that have their correct name. Previously variables
were named .x1
, .x2
, etc. Fixing #126 and
improving compatibility with compare_smooths()
and
smooth_estimates()
allowed the variables to be named
correctly.
gratia now depends on version 1.8-41 or later of the mgcv package.
draw.gam()
can now handle tensor products that include
a marginal random effect smooth. Beware plotting such smooths if there
are many levels, however, as a separate surface plot will be produced
for each level.Additional fixes for changes in dplyr 1.1.0.
smooth_samples()
now works when sampling from
posteriors of multiple smooths with different dimension. #126 reported
by @Aariq
{gratia} now depends on R version 4.1 or later.
A new vignette “Data slices” is supplied with {gratia}.
Functions in {gratia} have harmonised to use an argument named
data
instead of newdata
for passing new data
at which to evaluate features of smooths. A message will be printed if
newdata
is used from now on. Existing code does not need to
be changed as data
takes its value from
newdata
.
Note that due to the way ...
is handled in R, if your R
script uses the data
argument, and is run with
versions of gratia prior to 8.0 (when released; 0.7.3.8 if using the
development version) the user-supplied data will be silently ignored. As
such, scripts using data
should check that the installed
version of gratia is >= 0.8 and package developers should update to
depend on versions >= 0.8 by using gratia (>= 0.8)
in
DESCRIPTION
.
The order of the plots of smooths has changed in
draw.gam()
so that they again match the order in which
smooths were specified in the model formula. See Bug Fixes
below for more detail or #154.
Added basic support for GAMLSS (distributional GAMs) fitted with
the gamlss()
function from package GJRM. Support is
currently restricted to a draw()
method.
difference_smooths()
can now include the group means
in the difference, which many users expected. To include the group means
use group_means = TRUE
in the function call, e.g.
difference_smooths(model, smooth = "s(x)", group_means = TRUE
).
Note: this function still differs from plot_diff()
in
package itsadug, which essentially computes differences of
model predictions. The main practical difference is that other effects
beyond the factor by smooth, including random effects, may be included
with plot_diff()
.
This implements the main wish of #108 (@dinga92) and #143 (@mbolyanatz) despite my protestations that this was complicated in some cases (it isn’t; the complexity just cancels out.)
data_slice()
has been totally revised. Now, the user
provides the values for the variables they want in the slice and any
variables in the model that are not specified will be held at typical
values (i.e. the value of the observation that is closest to the median
for numeric variables, or the modal factor level.)
Data slices are now produced by passing name
=
value
pairs for the variables and their values that you
want to appear in the slice. For example
m <- gam(y ~ s(x1) + x2 + fac)
data_slice(model, x1 = evenly(x1, n = 100), x2 = mean(x2))
The value
in the pair can be an expression that will be
looked up (evaluated) in the data
argument or the model
frame of the fitted model (the default). In the above example, the
resulting slice will be a data frame of 100 observations, comprising
x1
, which is a vector of 100 values spread evenly over the
range of x1
, a constant value of the mean of
x2
for the x2
variable, and a constant factor
level, the model class of fac
, for the fac
variable of the model.
partial_derivatives()
is a new function for
computing partial derivatives of multivariate smooths
(e.g. s(x,z)
, te(x,z)
) with respect to one of
the margins of the smooth. Multivariate smooths of any dimension are
handled, but only one of the dimensions is allowed to vary. Partial
derivatives are estimated using the method of finite differences, with
forward, backward, and central finite differences available. Requested
by @noamross
#101
overview()
provides a simple overview of model terms
for fitted GAMs.
The new bs = "sz"
basis that was released with
mgcv version 1.18-41 is now supported in
smooth_estimates()
, draw.gam()
, and
draw.smooth_estimates()
and this basis has its own unique
plotting method. #202
basis()
now has a method for fitted GAM(M)s which
can extract the estimated basis from the model and plot it, using the
estimated coefficients for the smooth to weight the basis. #137
There is also a new draw.basis()
method for plotting the
results of a call to basis()
. This method can now also
handle bivariate bases.
tidy_basis()
is a lower level function that does the
heavy lifting in basis()
, and is now exported.
tidy_basis()
returns a tidy representation of a basis
supplied as an object inheriting from class "mgcv.smooth"
.
These objects are returned in the $smooth
component of a
fitted GAM(M) model.
lp_matrix()
is a new utility function to quickly
return the linear predictor matrix for an estimated model. It is a
wrapper to predict(..., type = "lpmatrix")
evenly()
is a synonym for seq_min_max()
and is preferred going forward. Gains argument by
to
produce sequences over a covariate that increment in units of
by
.
ref_level()
and level()
are new utility
functions for extracting the reference or a specific level of a factor
respectively. These will be most useful when specifying covariate values
to condition on in a data slice.
model_vars()
is a new, public facing way of
returning a vector of variables that are used in a model.
difference_smooths()
will now use the user-supplied
data as points at which to evaluate a pair of smooths. Also note that
the argument newdata
has been renamed data
.
#175
The draw()
method for
difference_smooths()
now uses better labels for plot titles
to avoid long labels with even modest factor levels.
derivatives()
now works for factor-smooth
interaction ("fs"
) smooths.
draw()
methods now allow the angle of tick labels on
the x axis of plots to be rotated using argument angle
.
Requested by @tamas-ferenci #87
draw.gam()
and related functions
(draw.parametric_effects()
,
draw.smooth_estimates()
) now add the basis to the plot
using a caption. #155
smooth_coefs()
is a new utility function for
extracting the coefficients for a particular smooth from a fitted model.
smooth_coef_indices()
is an associated function that
returns the indices (positions) in the vector of model coefficients
(returned by coef(gam_model)
) of those coefficients that
pertain to the stated smooth.
draw.gam()
now better handles patchworks of plots
where one or more of those plots has fixed aspect ratios. #190
draw.posterior_smooths
now plots posterior samples
with a fixed aspect ratio if the smooth is isotropic. #148
derivatives()
now ignores random effect smooths (for
which derivatives don’t make sense anyway). #168
confint.gam(...., method = "simultaneous")
now works
with factor by smooths where parm
is passed the full name
of a specific smooth s(x)faclevel
.
The order of plots produced by gratia::draw.gam()
again matches the order in which the smooths entered the model formula.
Recent changes to the internals of gratia::draw.gam()
when
the switch to smooth_estimates()
was undertaken lead to a
change in behaviour resulting from the use of
dplyr::group_split()
, and it’s coercion internally of a
character vector to a factor. This factor is now created explicitly, and
the levels set to the correct order. #154
Setting the dist
argument to set response or smooth
values to NA
if they lay too far from the support of the
data in multivariate smooths, this would lead an incorrect scale for the
response guide. This is now fixed. #193
Argument fun
to draw.gam()
was not
being applied to any parametric terms. Reported by @grasshoppermouse
#195
draw.gam()
was adding the uncertainty for all linear
predictors to smooths when overall_uncertainty = TRUE
was
used. Now draw.gam()
only includes the uncertainty for
those linear predictors in which a smooth takes part. #158
partial_derivatives()
works when provided with a
single data point at which to evaluate the derivative. #199
transform_fun.smooth_estimates()
was addressing the
wrong variable names when trying to transform the confidence interval.
#201
data_slice()
doesn’t fail with an error when used
with a model that contains an offset term. #198
confint.gam()
no longer uses
evaluate_smooth()
, which is soft deprecated. #167
qq_plot()
and worm_plot()
could compute
the wrong deviance residuals used to generate the theoretical quantiles
for some of the more exotic families (distributions) available in
mgcv. This also affected appraise()
but only for
the QQ plot; the residuals shown in the other plots and the deviance
residuals shown on the y-axis of the QQ plot were correct. Only the
generation of the reference intervals/quantiles was affected.
confint.fderiv()
and confint.gam()
now
return their results as a tibble instead of a common-or-garden data
frame. The latter mostly already did this.
Examples for confint.fderiv()
and
confint.gam()
were reworked, in part to remove some
inconsistent output in the examples when run on M1 macs.
compare_smooths()
failed when passed non-standard model
“names” like compare_smooths(m_gam, m_gamm$gam)
or
compare_smooths(l[[1]], l[[2]])
even if the evaluated
objects were valid GAM(M) models. Reported by Andrew Irwin #150draw.gam()
and draw.smooth_estimates()
can now handle splines on the sphere
(s(lat, long, bs = "sos")
) with special plotting methods
using ggplot2::coord_map()
to handle the projection to
spherical coordinates. An orthographic projection is used by default,
with an essentially arbitrary (and northern hemisphere-centric) default
for the orientation of the view.
fitted_values()
insures that data
(and
hence the returned object) is a tibble rather than a common or garden
data frame.
draw.posterior_smooths()
was redundantly plotting
duplicate data in the rug plot. Now only the unique set of covariate
values are used for drawing the rug.
data_sim()
was not passing the scale
argument in the bivariate example setting ("eg2"
).
draw()
methods for gamm()
and
gamm4::gamm4()
fits were not passing arguments on to
draw.gam()
.
draw.smooth_estimates()
would produce a subtitle
with data for a continuous by smooth as if it were a factor by smooth.
Now the subtitle only contains the name of the continuous by
variable.
Due to an issue with the size of the package source tarball, which wasn’t discovered until after submission to CRAN, 0.7.1 was never released.
draw.gam()
and draw.smooth_estimates()
:
{gratia} can now handle smooths of 3 or 4 covariates when plotting. For
smooths of 3 covariates, the third covariate is handled with
ggplot2::facet_wrap()
and a set (default n
=
16) of small multiples is drawn, each a 2d surface evaluated at the
specified value of the third covariate. For smooths of 4 covariates,
ggplot2::facet_grid()
is used to draw the small multiples,
with the default producing 4 rows by 4 columns of plots at the specific
values of the third and fourth covariates. The number of small multiples
produced is controlled by new arguments n_3d
(default =
n_3d = 16
) and n_4d
(default
n_4d = 4
, yielding n_4d * n_4d
= 16 facets)
respectively.
This only affects plotting; smooth_estimates()
has been
able to handle smooths of any number of covariates for a while.
When handling higher-dimensional smooths, actually drawing the plots
on the default device can be slow, especially with the default value of
n = 100
(which for 3D or 4D smooths would result in 160,000
data points being plotted). As such it is recommended that you reduce
n
to a smaller value: n = 50
is a reasonable
compromise of resolution and speed.
model_concurvity()
returns concurvity measures from
mgcv::concurvity()
for estimated GAMs in a tidy format. The
synonym concrvity()
is also provided. A draw()
method is provided which produces a bar plot or a heatmap of the
concurvity values depending on whether the overall concurvity of each
smooth or the pairwise concurvity of each smooth in the model is
requested.
draw.gam()
gains argument
resid_col = "steelblue3"
that allows the colour of the
partial residuals (if plotted) to be changed.
model_edf()
was not using the type
argument. As a result it only ever returned the default EDF
type.
add_constant()
methods weren’t applying the constant
to all the required variables.
draw.gam()
, draw.parametric_effects()
now actually work for a model with only parametric effects. #142
Reported by @Nelson-Gon
parametric_effects()
would fail for a model with
only parametric terms because predict.gam()
returns empty
arrays when passed exclude = character(0)
.
draw.gam()
now uses smooth_estimates()
internally and consequently uses its draw()
method and
underlying plotting code. This has simplified the code compared to
evaluate_smooth()
and its methods, which will allow for
future development and addition of features more easily than if
evaluate_smooth()
had been retained.
Similarly, evaluate_parametric_terms()
is now deprecated
in favour of parametric_effects()
, which is also used
internally by draw.gam()
if parametric terms are present in
the model (and parametric = TRUE
).
While a lot of code has been reused so differences between plots as a result of this change should be minimal, some corner cases may have been missed. File an Issue if you notice something that has changed that you think shouldn’t.
draw.gam()
now plots 2D isotropic smooths (TPRS and
Duchon splines) with equally-scaled x and y coordinates using
coord_equal(ratio = 1)
. Alignment of these plots will be a
little different now when plotting models with multiple smooths. See
Issue #81.
From version 0.7.0, the following functions are considered deprecated and their use is discouraged:
fderiv()
is soft-deprecated in favour of
derivatives()
,evaluate_smooth()
is soft-deprecated in favour
of smooth_estimates()
,evaluate_parametric_term()
is soft-deprecated
in favour of parametric_effects()
.The first call to one of these functions will generate a warning,
pointing to the newer, alternative, function. It is safe to ignore these
warnings, but these deprecated functions will no longer receive updates
and are thus at risk of being removed from the package at some future
date. The newer alternatives can handle more types of models and
smooths, especially so in the case of
smooth_estimates()
.
fitted_values()
provides a tidy wrapper around
predict.gam()
for generating fitted values from the model.
New covariate values can be provided via argument data
. A
credible interval on the fitted values is returned, and values can be on
the link (linear predictor) or response scale.
Note that this function returns expected values of the response. Hence, “fitted values” is used instead of “predictions” in the case of new covariate values to differentiate these values from the case of generating new response values from a fitted model.
rootogram()
and its draw()
method
produce rootograms as diagnostic plots for fitted models. Currently only
for models fitted with poisson()
, nb()
,
negbin()
, gaussian()
families.
New helper functions typical_values()
,
factor_combos()
and data_combos()
for quickly
creating data sets for producing predictions from fitted models where
some covariatess are fixed at come typical or representative values.
typical_values()
is a new helper function to return
typical values for the covariates of a fitted model. It returns the
value of the observation closest to the median for numerical covariates
or the modal level of a factor while preserving the levels of that
factor. typical_values()
is useful in preparing data slices
or scenarios for which fitted values from the estimated model are
required.
factor_combos()
extracts and returns the combinations of
levels of factors found in data used to fit a model. Unlike
typical_values()
, factor_combos()
returns all
the combinations of factor levels observed in the data, not just the
modal level. Optionally, all combinations of factor levels can be
returned, not just those in the observed data.
data_combos()
combines returns the factor data from
factor_combos()
plus the typical values of numerical
covariates. This is useful if you want to generate predictions from the
model for each combination of factor terms while holding any continuous
covariates at their median values.
nb_theta()
is a new extractor function that returns
the theta parameter of a fitted negative binomial GAM (families
nb()
or negbin()
). Additionally,
theta()
and has_theta()
provide additional
functionality. theta()
is an experimental function for
extracting any additional parameters from the model or family.
has_theta()
is useful for checking if any additional
parameters are available from the family or model.
edf()
extracts the effective degrees of freedom
(EDF) of a fitted model or a specific smooth in the model. Various forms
for the EDF can be extracted.
model_edf()
returns the EDF of the overall model. If
supplied with multiple models, the EDFs of each model are returned for
comparison.
draw.gam()
can now show a “rug” plot on a bivariate
smooth by drawing small points with high transparency over the smooth
surface at the data coordinates.
In addition, the rugs on plots of factor by smooths now show the locations of covariate values for the specific level of the factor and not over all levels. This better reflects what data were used to estimate the smooth, even though the basis for each smooth was set up using all of the covariate locations.
draw.gam()
and draw.smooth_estimates()
now allow some aspects of the plot to be changed: the fill (but not
colour) and alpha attributes of the credible interval, and the line
colour for the smooth can now be specified using arguments
ci_col
, ci_alpha
, and smooth_col
respectively.
Partial residuals can now be plotted on factor by smooths. To allow this, the partial residuals are filtered so that only residuals associated with a particular level’s smooth are drawn on the plot of the smooth.
smooth_estimates()
uses
check_user_select_smooths()
to handle user-specified
selection of smooth terms. As such it is more flexible than previously,
and allows for easier selection of smooths to evaluate.
fixef()
is now imported (and re-exported) from the
nlme package, with methods for models fitted with
gam()
and gamm()
, to extract fixed effects
estimates from fitted models. fixed_effects()
is an alias
for fixef()
.
The draw()
method for smooth_samples()
can now handle 2D smooths. Additionally, the number of posterior draws
to plot can now be specified when plotting using new argument
n_samples
, which will result in n_samples
draws being selected at random from the set of draws for plotting. New
argument seed
allows the selection of draws to be
repeatable.
smooth_estimates()
was not filtering user-supplied
data for the by level of the specific smooth when used with by factor
smooths. This would result in the smooth being evaluated at all rows of
the user-supplied data, and therefore would result in
nrow(user_data) * nlevels(by_variable)
rows in the returned
object instead of nrow(user_data)
rows.
The add_confint()
method for
smooth_estimates()
had the upper and lower intervals
reversed. #107 Reported by @Aariq
draw.gam()
and smooth_estimates()
were
both ignoring the dist
argument that allows covariate
values that lie too far from the support of the data to be excluded when
returning estimated values from the smooth and plotting it. #111
Reported by @Aariq
smooth_samples()
with a factor by GAM would return
samples for the first factor level only. Reported by @rroyaute in discussion of
#121
smooth_samples()
would fail if the model contained
random effect “smooths”. These are now ignored with a message when
running smooth_samples()
. Reported by @isabellaghement in
#121
link()
, inv_link()
were failing on
models fitted with family = scat()
. Reported by @Aariq #130
The {cowplot} package has been replaced by the {patchwork}
package for producing multi-panel figures in draw()
and
appraise()
. This shouldn’t affect any code that used
{gratia} only, but if you passed additional arguments to
cowplot::plot_grid()
or used the align
or
axis
arguments of draw()
and
appraise()
, you’ll need to adapt code accordingly.
Typically, you can simply delete the align
or
axis
arguments and {patchwork} will just work and align
plots nicely. Any arguments passed via ...
to
cowplot::plot_grid()
will just be ignored by
patchwork::wrap_plots()
unless those passed arguments match
any of the arguments of patchwork::wrap_plots()
.
The {patchwork} package is now used for multi-panel figures. As such, {gratia} no longer Imports from the {cowplot} package.
Worm plot diagnostic plots are available via new function
worm_plot()
. Worm plots are detrended Q-Q plots, where
deviation from the Q-Q reference line are emphasized as deviations
around the line occupy the full height of the plot.
worm_plot()
methods are available for models of classes
"gam"
, "glm"
, and "lm"
.
(#62)
Smooths can now be compared across models using
compare_smooths()
, and comparisons visualised with the
associated draw()
method. (#85 @dill)
This feature is a bit experimental; the returned object uses nested lists and may change in the future if users find this confusing.
The reference line in qq_plot()
with
method = "normal"
was previously drawn as a line with
intercept 0 and slope 1, to match the other methods. This was
inconsistent with stats::qqplot()
which drew the line
through the 1st and 3rd quartiles. qq_plot()
with
method = "normal"
now uses this robust reference line.
Reference lines for the other methods remain drawn with slope 1 and
intercept 0.
qq_plot()
with method = "normal"
now
draws a point-wise reference band using the standard error of the order
statistic.
The draw()
method for penalty()
now
plots the penalty matrix heatmaps in a more-logical orientation, to
match how the matrices might be written down or printed to the R
console.
link()
, and inv_link()
now work for
models fitted with the gumbls()
and shash()
families. (#84)
extract_link()
is a lower level utility function
related to link()
and inv_link()
, and is now
exported.
The default method name for generating reference quantiles in
qq_plot()
was changed from "direct"
to
"uniform"
, to avoid confusion with the
mgcv::qq.gam()
help page description of the methods.
Accordingly using method = "direct"
is deprecated and a
message to this effect is displayed if used.
The way smooths/terms are selected in derivatives()
has been switched to use the same mechanism as draw.gam()
’s
select
argument. To get a partial match to
term
, you now need to also specify
partial_match = TRUE
in the call to
derivatives()
.
transform_fun()
had a copy paste bug in the
definition of the then generic. (#96 @Aariq)
derivatives()
with user-supplied
newdata
would fail for factor by smooths with
interval = "simultaneous"
and would introduce rows with
derivative == 0 with interval = "confidence"
because it
didn’t subset the rows of newdata
for the specific level of
the by factor when computing derivatives. (#102 @sambweber)
evaluate_smooth()
can now handle random effect
smooths defined using an ordered factor. (#99 @StefanoMezzini)
smooth_estimates()
can now handle
s(x, z, a)
,te()
, t2()
, &
ti()
), e.g. te(x, z, a)
s(x, f, bs = "fs")
s(f, bs = "re")
penalty()
provides a tidy representation of the
penalty matrices of smooths. The tidy representation is most suitable
for plotting with ggplot()
.
A draw()
method is provided, which represents the
penalty matrix as a heatmap.
newdata
argument to smooth_estimates()
has been changed to data
as was originally intended.Partial residuals for models can be computed with
partial_residuals()
. The partial residuals are the weighted
residuals of the model added to the contribution of each smooth term (as
returned by predict(model, type = "terms")
.
Wish of #76 (@noamross)
Also, new function add_partial_residuals()
can be used
to add the partial residuals to data frames.
Users can now control to some extent what colour or fill scales
are used when plotting smooths in those draw()
methods that
use them. This is most useful to change the fill scale when plotting 2D
smooths, or to change the discrete colour scale used when plotting
random factor smooths (bs = "fs"
).
The user can pass scales via arguments discrete_colour
and continuous_fill
.
The effects of certain smooths can be excluded from data
simulated from a model using simulate.gam()
and
predicted_samples()
by passing exclude
or
terms
on to predict.gam()
. This allows for
excluding random effects, for example, from model predicted values that
are then used to simulate new data from the conditional distribution.
See the example in predicted_samples()
.
Wish of #74 (@hgoldspiel)
draw.gam()
and related functions gain arguments
constant
and fun
to allow for user-defined
constants and transformations of smooth estimates and confidence
intervals to be applied.
Part of wish of Wish of #79.
confint.gam()
now works for 2D smooths
also.
smooth_estimates()
is an early version of code to
replace (or more likely supersede) evaluate_smooth()
.
smooth_estimates()
can currently only handle 1D smooths of
the standard types.
The meaning of parm
in confint.gam
has
changed. This argument now requires a smooth label to match a smooth. A
vector of labels can be provided, but partial matching against a smooth
label only works with a single parm
value.
The default behaviour remains unchanged however; if parm
is NULL
then all smooths are evaluated and returned with
confidence intervals.
data_class()
is no longer exported; it was only ever
intended to be an internal function.
confint.gam()
was failing on a tensor product smooth
due to matching issues. Reported by @tamas-ferenci #88
This also fixes #80
The vdiffr package is now used conditionally in package tests. Reported by Brian Ripley #93
draw.gam()
with scales = "fixed"
now
applies to all terms that can be plotted, including 2d smooths.
Reported by @StefanoMezzini #73
dplyr::combine()
was deprecated. Switch to
vctrs::vec_c()
.
draw.gam()
with scales = "fixed"
wasn’t
using fixed scales where 2d smooths were in the model.
Reported by @StefanoMezzini #73
draw.gam()
can include partial residuals when
drawing univariate smooths. Use residuals = TRUE
to add
partial residuals to each univariate smooth that is drawn. This feature
is not available for smooths of more than one variable, by smooths, or
factor-smooth interactions (bs = "fs"
).
The coverage of credible and confidence intervals drawn by
draw.gam()
can be specified via argument
ci_level
. The default is arbitrarily 0.95
for
no other reason than (rough) compatibility with
plot.gam()
.
This change has had the effect of making the intervals slightly narrower than in previous versions of gratia; intervals were drawn at ± 2 × the standard error. The default intervals are now drawn at ± ~1.96 × the standard error.
New function difference_smooths()
for computing
differences between factor smooth interactions. Methods available for
gam()
, bam()
, gamm()
and
gamm4::gamm4()
. Also has a draw()
method,
which can handle differences of 1D and 2D smooths currently (handling 3D
and 4D smooths is planned).
New functions add_fitted()
and
add_residuals()
to add fitted values (expectations) and
model residuals to an existing data frame. Currently methods available
for objects fitted by gam()
and
bam()
.
data_sim()
is a tidy reimplementation of
mgcv::gamSim()
with the added ability to use sampling
distributions other than the Gaussian for all models implemented.
Currently Gaussian, Poisson, and Bernoulli sampling distributions are
available.
smooth_samples()
can handle continuous by variable
smooths such as in varying coefficient models.
link()
and inv_link()
now work for all
families available in mgcv, including the location, scale,
shape families, and the more specialised families described in
?mgcv::family.mgcv
.
evaluate_smooth()
, data_slice()
,
family()
, link()
, inv_link()
methods for models fitted using gamm4()
from the
gamm4 package.
data_slice()
can generate data for a 1-d slice (a
single variable varying).
The colour of the points, reference lines, and simulation band in
appraise()
can now be specified via arguments
point_col
,point_alpha
,ci_col
ci_alpha
line_col
These are passed on to qq_plot()
,
observed_fitted_plot()
,
residuals_linpred_plot()
, and
residuals_hist_plot()
, which also now take the new
arguments were applicable.
Added utility functions is_factor_term()
and
term_variables()
for working with models.
is_factor_term()
identifies is the named term is a factor
using information from the terms()
object of the fitted
model. term_variables()
returns a character vector of
variable names that are involved in a model term. These are strictly for
working with parametric terms in models.
appraise()
now works for models fitted by
glm()
and lm()
, as do the underlying functions
it calls, especially qq_plot
.
appraise()
also works for models fitted with family
gaulss()
. Further location scale models and models fitted
with extended family functions will be supported in upcoming
releases.
datagen()
is now an internal function and
is no longer exported. Use data_slice()
instead.
evaluate_parametric_term()
is now much stricter and
can only evaluate main effect terms, i.e. those whose order, as stored
in the terms
object of the model is
1
.
The draw()
method for derivatives()
was
not getting the x-axis label for factor by smooths correctly, and
instead was using NA
for the second and subsequent levels
of the factor.
The datagen()
method for class "gam"
couldn’t possibly have worked for anything but the simplest models and
would fail even with simple factor by smooths. These issues have been
fixed, but the behaviour of datagen()
has changed, and the
function is now not intended for use by users.
Fixed an issue where in models terms of the form
factor1:factor2
were incorrectly identified as being
numeric parametric terms. #68
New functions link()
and inv_link()
to
access the link function and its inverse from fitted models and family
functions.
Methods for classes: "glm"
, "gam"
,
"bam"
, "gamm"
currently. #58
Adds explicit family()
methods for objects of
classes "gam"
, "bam"
, and
"gamm"
.
derivatives()
now handles non-numeric when creating
shifted data for finite differences. Fixes a problem with
stringsAsFactors = FALSE
default in R-devel. #64
gratia now uses the mvnfast package for random
draws from a multivariate normal distribution
(mvnfast::rmvn()
). Contributed by Henrik Singmann
New function basis()
for generating tidy
representations of basis expansions from an mgcv-like
definition of a smooth, e.g. s()
, te()
,
ti()
, or t2()
. The basic smooth types also
have a simple draw()
method for plotting the basis.
basis()
is a simple wrapper around
mgcv::smoothCon()
with some post processing of the basis
model matrix into a tidy format. #42
New function smooth_samples()
to draw samples of
entire smooth functions from their posterior distribution. Also has a
draw()
method for plotting the posterior samples.
draw.gam()
would produce empty plots between the
panels for the parametric terms if there were 2 or more parametric terms
in a model. Reported by @sklayn #39.
derivatives()
now works with factor by smooths,
including ordered factor by smooths. The function also now works
correctly for complex models with multiple covariates/smooths. #47
derivatives()
also now handles 'fs'
smooths. Reported by @tomand-uio #57.
evaluate_parametric_term()
and hence
draw.gam()
would fail on a ziplss()
model
because i) gratia didn’t handle parametric terms in models with
multiple linear predictors correctly, and ii) gratia didn’t
convert to the naming convention of mgcv for terms in higher
linear predictors. Reported by @pboesu #45
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.