1. Default modgo simulation
For illustration, we selected the Cleveland Clinic Heart Disease Data
set from the University of California in Irvine (UCI) machine learning
data repository (Dua and Graff 2017).
Below, we are using eleven variables, five of which are continuous, four
are dichotomous, and two categorical variables.
library(modgo)
data("Cleveland", package = "modgo")
# Specifying dichotomous and ordinal categorical variables
binary_variables <- c("Sex","HighFastBloodSugar","CAD","ExInducedAngina")
categorical_variables <- c("Chestpaintype","RestingECG")
nrep <- 500
plot_variables <- c("Age", "STDepression", binary_variables[c(1,3)], categorical_variables)
In this section, we run modgo with its default settings. For
modgo to produce results that mimic the original data set
efficiently, user needs to specify dichotomous and ordinal categorical
variables. Variables will be considered as continuous, otherwise. All
modgo runs in this and the following sections will produce 500
data sets with the specification nrep = 500; the default is 100.
Figure 1 shows the correlation plots for the default modgo
run, and Figure 2 displays the distribution plots for the original data
set and one simulated data set. The default displayed simulated data set
is the first one. Moreover, for all the plots a set of variables are
used.
test <- modgo(data = Cleveland,
bin_variables = binary_variables,
categ_variables = categorical_variables,
nrep = nrep)
2. Expansions
2.1 Selection by thresholds of variables
modgo provides an option so that only subjects (instances)
are simulated that fulfill a specific requirement. In the simplest case
(Section 2.1), the user can specify an upper or a lower boundary, or an
interval for a variable. The use may alternatively specify a combination
of variables and thresholds.
Three steps are required when subjects need to fulfill a specific
selection criterion for a continuous variable. First, the name of the
variable needs to be specified, for which the threshold needs to be set.
Second, the left and right boundaries need to be specified. Third, a
data frame with three columns is defined with Column 1: variable name of
threshold variable, Column 2: left boundary, i.e., lower bound, Column
3: right boundary, i.e., upper bound. Finally, the data frame is
imported using the thresh_var argument. In the example, all
subjects have to be at least 66 years old. The selection variable
therefore is Age with left threshold 65 and right
threshold infinity NA.
If the percentage of samples fulfilling the indicated threshold
requirements are less than 10% of the simulated samples, modgo
stops to avoid excessive computation time. However, users can force
thresh_force = TRUE the requested simulation to be run.
Figure 3 shows the correlation plot for this illustration.
Substantial differences between the original and the simulated
correlation plots can be observed for the RestingECG and several other
variables. Figure 4 displays the corresponding distribution plot. The
age distribution is shifted as expected. Furthermore, the distribution
of subjects with coronary artery disease (CAD = 1) is higher in the
simulated than the original data set.
Variables <- c("Age")
thresh_left <- c(65)
thresh_right <- c(NA)
thresholds <- data.frame(Variables, thresh_left, thresh_right)
print(as.matrix(thresholds))
## Variables thresh_left thresh_right
## [1,] "Age" "65" NA
test_thresh <- modgo(data = Cleveland,
bin_variables = binary_variables,
categ_variables = categorical_variables,
thresh_var = thresholds,
nrep = nrep,
thresh_force = TRUE)
2.2 Perturbation analysis - Unchanged variance
For continuous variables, modgo provides the option to add a
normally distributed noise with mean 0 and variance \(\sigma_{p}^2\). With this perturbation, the
variance of the perturbed variable is identical to the variance of the
original variable. This option permits the generation of values from
continuous variables, which were not observed in the original data
set.
To specify which variables are to be perturbed and to which degree,
i.e., percentage, the user needs to provide modgo with a named
vector of the percentages and with the corresponding variables names as
the names of the vector.
Similar to the previous examples, Figure 5 shows the correlation
plots for the expansion to perturbations, and Figure 6 displays the
distribution plots. Figure 6 shows that the distribution of both resting
blood pressure and cholesterol change substantially due to the
perturbation.
#Create named vector
perturb_vector <- c(0.9,0.7)
names(perturb_vector) <- c("RestingBP","Cholsterol")
test_pertru <- modgo(data = Cleveland,
bin_variables = binary_variables,
categ_variables = categorical_variables,
pertr_vec = perturb_vector,
nrep = nrep)
3. Generalized lambda modgo simulation
Another feature provided by modgo is the ability to simulate
a data set using the Generalized Lambdas Distribution (GLD) method. This
method allows users to generate values that are not present in the
original data set, as the default method only uses values from the
original data. The GLD method is based on the GLDEX package (Su 2007). More information on Generalized
Lambdas Distributions can be found in Fitting Statistical Distributions
(Zaven A. Karian 2000).
test_GLD <- modgo(data = Cleveland,
bin_variables = binary_variables,
categ_variables = categorical_variables,
generalized_mode = TRUE,
nrep = nrep)
GLDEX provides three basic models for calculating the four Lambdas
for each distribution. These models are called rmfmkl (default model),
rprs, and star (Su 2007). They can also be
combined for a bi-modal estimation. We give you the option to specify
your desired model(or a combination of models) for each variable in the
dataset. In the next step, we will show you how to specify the desired
GLD models.
Variables <- c("Age","STDepression")
Model <- c("rprs", "star-rmfmkl")
model_matrix <- cbind(Variables,
Model)
test_GLD_define_model <- modgo(data = Cleveland,
bin_variables = binary_variables,
categ_variables = categorical_variables,
generalized_mode = TRUE,
generalized_mode_model = model_matrix,
nrep = nrep)
By examining the distribution plots shown above, we can observe that
the GLD method has the capability to generate values for certain
variables, such as STDepression, that do not exist in the original data
set and can also be extremely high. Additionally, there is an
alternative option to compute Generalized Lambdas independently of the
modgo function and subsequently utilize them as an input for a
subsequent modgo run.
gener_lambdas_matrix <- generalizedMatrix(data = Cleveland,
generalized_mode_model = model_matrix,
bin_variables = binary_variables)
test_GLD_define_model_set_lambdas <- modgo(data = Cleveland,
bin_variables = binary_variables,
categ_variables = categorical_variables,
generalized_mode = TRUE,
generalized_mode_lmbds = gener_lambdas_matrix,
nrep = nrep)
Lastly, an intriguing feature provided by modgo in
conjunction with the GLD method is the capability to simulate a data set
without requiring the original data. To execute modgo without a
data set, the user must provide the following:
1) Correlation matrix of the data set
2) Generalized matrix of the data set
3) Sample size of the simulated data set
4) Variable names
Below, we present an example of this case.
# Necessary arguments
gener_lambdas_matrix <- generalizedMatrix(data = Cleveland,
generalized_mode_model = model_matrix,
bin_variables = binary_variables)
sigma <- cor(Cleveland)
variables_names <- colnames(sigma)
sample_size <- 100
test_GLD_no_data_set <- modgo(data = NULL,
variables = variables_names,
bin_variables = binary_variables,
categ_variables = categorical_variables,
sigma = sigma,
generalized_mode = TRUE,
generalized_mode_lmbds = gener_lambdas_matrix,
n_samples = sample_size,
nrep = nrep)
## Data set is not provided
4. Survival example
To demonstrate the simulation of survival variables, we chose the
cancer data set from the survival package (Therneau 2023). This data set contains 167
samples and 10 variables. In order to set up modgo_survival(), the user
must specify a status variable and a time variable, in addition to the
other arguments of modgo.
# cancer prepare
data("cancer", package = "survival")
cancer <- na.omit(cancer)
cancer$sex <- cancer$sex - 1
cancer$status <- cancer$status - 1
time_var_cancer <- "time"
status_var_cancer <- "status"
bin_var_cancer <- c("status", "sex")
cat_var_list_cancer <- c("ph.ecog")
plot_variables_surv <- colnames(cancer)[1:6]
The modgo_survival function divides the data set into two separate
data sets based on the status variable, and then it simulates each data
set individually using the Generalized Lambdas Distribution method. The
user can specify which GLDEX model should be used for each data set,
with the default being “rprs”.
# Survival run
test_surv <- modgo_survival(data = cancer,
surv_method = 1,
bin_variables = bin_var_cancer,
categ_variables = cat_var_list_cancer,
event_variable = status_var_cancer,
time_variable = time_var_cancer,
generalized_mode_model_no_event = "rmfmkl",
generalized_mode_model_event = "rprs")
In the following plot, the surv_fit() curves from the
survival package for both original and simulated data are
depicted.
data_set_info <- c(rep("Original", dim(test_surv$original_data)[1]),
rep("Simulated", dim(test_surv$simulated_data[[1]])[1]))
combine_data_set <- rbind(test_surv$original_data,
test_surv$simulated_data[[1]])
combine_data_set <- cbind(combine_data_set,
data_set_info)
fit <- survfit(Surv(time, status) ~ data_set_info,
data=combine_data_set)
plot(fit,
fun = "F",
col=1:2)
legend(700, 1,
c("Original data set", "Simulated data set"),
lty=c(1,1),
col=c(1,2),
bty='n',
lwd=2)
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
