The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
In any end-to-end analysis there likely exists points in the analysis where researchers have to make a decision between two or more equally defensible choices (e.g., different ways of excluding outliers, different data transformations). In a multiverse analysis, researchers identify all the possible decision points for an analysis, determine alternative analysis steps at each decision point, implements them all, and then report the outcomes of all analyses resulting from all possible choice combinations.
However, declaring several alternative analysis paths can be tricky,
often requiring custom control flows such as nested for-loops and
multiple if-else statements. The goal of
multiverse is to allow users to create a multitude of
end-to-end analyses in a concise and easily interpretable manner.
multiverse enables this by providing both an embedded
Domain-Specific Language (DSL) as well as an API to interact with and
extract results from a multiverse analysis, which can then be neatly
wrapped within a larger analysis in R.
For more background on what a multiverse analysis is, please refer to the works of Steegen et al., who first put forth the concept of multiverse analysis, and Simonsohn et al., who put forth a similar notion called the Specification curve analysis.
The multiverse documentation predominantly follows the
tidyverse syntax.
You can install the package from CRAN:
install.packages("multiverse")To install the latest development version from GitHub, you can use these R commands:
install.packages("devtools")
devtools::install_github("mucollective/multiverse")In this document, we will provide you with details on how to quickly get started with this package. Please refer to the following vignettes for further information on:
multiverse can be used in different environments
such as in RMarkdown and RScripts. See
vignette("multiverse-in-rmd").multiverse
using branch, and how multiverse processes the
user-declared (multiverse DSL) code to create multiple
end-to-end executable R analysis code. See
vignette("branch").multiverse; conditions can be used to state when two steps
in a multiverse are incompatible with one another. See
vignette("conditions").vignette("visualising-multiverse").We also implement a series of end-to-end multiverse implementations using this package to demonstrate how it might be used (which can be found in the package vignettes):
In this document, we outline an initial approach to conducting a multiverse analysis in R. We will show how our package can be used to perform the multiverse analysis outlined by Simohnsohn et al. in Specification Curve: Descriptive and Inferential Statistics on All Reasonable Specifications where they reanalysed the study titled Female hurricanes are deadlier than male hurricanes.
Before we dive into the analysis, it might be helpful to establish a terminology to help describe the steps that go into creating a multiverse analysis. We adopt the “tree of analysis” metaphor (see Figure below): “an analysis proceeds from top to bottom, and each branching represents a choice between different analysis options”.
In this terminology:
The dataset used by Jung et al., in their study Female hurricanes are
deadlier than male hurricanes, contained information on 94
hurricanes from a list published by National Oceanic and Atmospheric
Administration (NOAA). For each storm, the authors compiled information
on the year (year), number of deaths (deaths),
minimum pressure (pressure), maximum wind speed at time of
landfall (wind), dollar amount of property damages
(damage) and hurricane severity or category of the storm
(category). Nine independent coders were asked to rate the names of the
hurricanes on a two-item 11-point scale (1 = more masculine; 11 = more
feminine), and the femininity of each name was computed as
the mean of these two items.
We first load the raw data and store it as a tibble. The data is
provided with the package and can be loaded using the
data("hurricane) command.
data("hurricane")
hurricane_data <- hurricane |>
# rename some variables
rename(
year = Year,
name = Name,
dam = NDAM,
death = alldeaths,
female = Gender_MF,
masfem = MasFem,
category = Category,
pressure = Minpressure_Updated_2014,
wind = HighestWindSpeed
) |>
# create new variables
# which are relevant later on
mutate(
post = ifelse(year>1979, 1, 0),
zcat = as.numeric(scale(category)),
zpressure = -scale(pressure),
zwind = as.numeric(scale(wind)),
z3 = as.numeric((zpressure + zcat + zwind) / 3)
)The data look like this:
hurricane_data |>
head()
#> year name masfem MinPressure_before pressure female category death wind
#> 1 1950 Easy 5.40625 958 960 0 3 2 125
#> 2 1950 King 1.59375 955 955 0 4 4 134
#> 3 1952 Able 2.96875 985 985 0 1 3 125
#> 4 1953 Barbara 8.62500 987 987 1 1 1 75
#> 5 1953 Florence 7.87500 985 985 1 1 0 115
#> 6 1954 Carol 8.53125 960 960 1 3 60 115
#> dam Elapsed.Yrs Source post zcat zpressure zwind z3
#> 1 2380 63 MWR 0 0.8281862 0.2017975 -0.02006244 0.3366404
#> 2 7220 63 MWR 0 1.7661320 0.4513891 0.27257241 0.8300312
#> 3 210 61 MWR 0 -1.0477054 -1.0461607 -0.02006244 -0.7046428
#> 4 78 60 MWR 0 -1.0477054 -1.1459973 -1.64581157 -1.2798381
#> 5 21 60 MWR 0 -1.0477054 -1.0461607 -0.34521226 -0.8130261
#> 6 24962 59 MWR 0 0.8281862 0.2017975 -0.34521226 0.2282571The original analysis removed the two hurricanes with the highest
death toll as outliers. To test their hypothesis that hurricanes with
more feminine names result in more deaths, the authors fit a negative
binomial model using the number of deaths as the response variable (due
to some issues with implementing the negative binomial model in R, we
approximate it by fitting a poisson model instead). For predictors, they
use femininity, damages, standardised value of
pressure (zpressure), interaction between
femininity and damages, and the interaction
between femininity and zpressure.
The following code block contains the steps involved in implementing the original analysis:
df.filtered = hurricane_data |>
filter(name != "Katrina" & name != "Audrey") |>
mutate(zpressure = -scale(pressure))
fit = glm(
death ~ masfem * dam + masfem * zpressure,
data = df.filtered,
family = "poisson"
)The result below indicates that there is a small but positive effect
of masfem (femininity of the name of a hurricane) on
deaths, when controlled for damages. This appears to
support the original hypothesis.
tidy(fit) |>
filter(term != "(Intercept)") |>
ggplot() +
geom_vline(xintercept = 0, color = "red") +
geom_pointinterval(aes(x = estimate, y = term, xmin = estimate + qnorm(0.025)*std.error, xmax = estimate + qnorm(0.975)*std.error)) +
theme_minimal()
However, the original analysis involved at least four analysis decisions (A-D), and at each decision point (node) alternative choices may have led to a different result. These decisions are highlighted in the figure below:
Several subsequent studies, each proposing a different analysis strategy, found no presence of such an effect, suggesting that the original finding may have been a result of a idiosyncratic combination of analysis choices. Data analysis can often involve several decisions involving two or more options. In most statistical analysis, these decisions are taken by the researcher based on some reasonable justification. However, for several decisions, there can be more than one reasonable option to choose from. A multiverse analysis makes all such decisions explicit and conducts the complete analysis for all combinations of options (of each decision). Below, we use this analysis as an example of how a single analysis can be extended to a multiverse analysis.
multiverse provides flexible functions which can be used
to easily multiplex over alternative analysis steps, and perform a
multiverse analysis. To describe both the features of multiverse and to
sketch out how an analyst might progressively create a multiverse from
the bottom up, we describe how to modify the traditional,
single-universe analysis from the previous figure in to a multiverse
analysis.
The first step is to load the library and define a new
multiverse, which is the variable M. We will use this
multiverse object to create a set of universes, each representing a
different way of analysing our data.
#load the library
library(multiverse)
#create multiverse object
M = multiverse()Through the multiverse DSL, users are specifying
multiple analysis paths at the same time. The DSL cannot be executed
directly in an R environment or R code chunk and needs to be declared,
processed and executed in a special environment. To be more precise,
multiverse takes the user declared code, parses and
rewrites the code into multiple versions of valid R code, each
corresponding to an unique analysis path in the multiverse. For more
information on this processing step, see
vignette("branch")
To get around these limitations, we need to declare this (multiverse
DSL) code “inside a multiverse object”. The multiverse
package facilitates this through some boilerplate code:
inside() function: allows users to declare
multiverse code in RScripts (or within regular R code blocks).Note that the inside function is more
suited for a script-style implementation. When using the interactive
programming interface of RStudio, user should use
multiverse code chunks.
RMarkdown supports
languages other than R and these languages have dedicated code
blocks. We extend this by providing multiverse
code blocks which can be used instead of the regular
r code block to write code inside a multiverse object (see
for more details on using the multiverse code blocks with RMarkdown). A
multiverse code block is a custom engine designed to work with
the multiverse package, to implement the multiverse
analyses. This allows you to write more concise code and is more
consistent with the interactive programming interface of RStudio. Below
we show how code can be implemented using the multiverse code
block: (Note: if you are using an RScript or the R
console, please skip to the next section as executing the code below
will throw an error)
```{multiverse default-m-1, inside = M}
# here we just create the variable `df` in the multiverse
df = hurricane_data
# here, we perform a `filter` operation in the multiverse
df.filtered = df |>
filter(branch(death_outliers,
"no_exclusion" ~ TRUE,
"most_extreme" ~ name != "Katrina",
"two_most_extreme" ~ !(name %in% c("Katrina", "Audrey"))
))
```The code within the filter function call is written in
the multiverse DSL and cannot be executed directly in R.
For now, ignore what the branch function does as we will
discuss about this in more detail in the next section. When this code is
written and executed inside a multiverse code block, it allows
the multiverse library to process and compile it to three different
analyses.
We provide the ability to declare multiverse code block as an AddIn in RStudio. Users can click on AddIns toolbar menu in RStudio (see the image below). This would create a multiverse code block at the location of the cursor in the document.
Alternately, users can insert a multiverse code block using a keyboard shortcut. Users can create a keyboard shortcut to declare a multiverse code block inside a RMarkdown document through the following steps:
Please refer to for more details on using the multiverse code blocks with RMarkdown. The vignette also contains information on steps for debugging some of the common problems in assigning keyboard shortcuts.
inside()Alternatively, when working with RScripts (or in a regular
r code block), users can make use of the
inside() function to write code inside a multiverse object.
inside() takes in two arguments:
{}.Note that inside() is primarily designed for script
style programming. If a user is working with an RScript, the previous
code can be declared “inside the multiverse object” using the
inside() function as follows:
# here we just create the variable `df` in the multiverse
inside(M, { df = hurricane_data })
# here, we perform two `mutate` operations in the multiverse.
# although they could have been chained, this illustrates
# how multiple variables can be declared together using the `{}`
inside(M, {
df.filtered = df |>
filter(branch(death_outliers,
"no_exclusion" ~ TRUE,
"most_extreme" ~ name != "Katrina",
"two_most_extreme" ~ !(name %in% c("Katrina", "Audrey"))
))
})In the rest of this vignette, we will use multiverse code
blocks to specify the multiverse. Please refer to the vignette
(vignette("multiverse-in-rmd")) for more details on
declaring multiverse analyses in both RMarkdown and
RScripts
After you’ve specified the appropriate boilerplate which is necessary
to use the multiverse DSL, the next step is to define our
possible alternate analysis paths. The multiverse package includes
functions that aim to make it easy to declare multiple alternate choices
at each analysis decision point. We do this by enabling analysts to
declare code using syntax which is as close to that of a single universe
analysis as possible. Consider these first few lines from the
transformation code in the single analysis above:
df.filtered = hurricane_data |>
filter(name != "Katrina" & name != "Audrey")Here, the researchers are faced with the decision of which hurricanes to exclude as outliers. They decide to exclude the two hurricanes which have caused the most deaths. However, this decision is arbitrary. Why not include all hurricanes? Why not exclude only the one with most deaths? Thus we could have three possible ways of removing outliers based on extreme number of deaths:
To create a multiverse that includes these three possible analysis
options, we use the branch() function. The
branch() function accepts three or more arguments. The
first argument defines a parameter (here
death outliers). The subsequent arguments, which we refer
to as options, define the different choices that a researcher
can make at that decision node of their analysis; these follow the
syntax <option_name> ~ <option_definition>. The
<option_name> part is intended to allow naming the
branches with meaningful names to help the user keep track of declared
options (in the multiverse specification below, “no_exclusion”,
“most_extreme”, “two_most_extreme” are used as option names). However,
names can be omitted; if omitted, the entire syntax for performing that
operation will be treated as the name for that particular option.
Putting it all together, a decision point in a multiverse analysis can thus be declared as:
```{multiverse branch_definition, inside = M}
# here we just create the variable `df` in the multiverse
df = hurricane_data
# here, we perform a `filter` operation in the multiverse
df.filtered = df |>
filter(branch(death_outliers,
"no_exclusion" ~ TRUE,
"most_extreme" ~ name != "Katrina",
"two_most_extreme" ~ !(name %in% c("Katrina", "Audrey"))
))
```The multiverse library then takes this user-declared
syntax in the multiverse DSL and and compiles it into three separate,
executable R expressions as shown in the figure below:
More details on the branch() function can be found in
the corresponding vignette("branch").
Once you add the code to the multiverse, it automatically processes
the code to identify the parameters and the corresponding
options that have been defined for each parameter.
Once the code has been added, the multiverse object will
have the following attributes:
parameters, which is a list of parametersparameters(M)
#> $death_outliers
#> $death_outliers[[1]]
#> [1] "no_exclusion"
#>
#> $death_outliers[[2]]
#> [1] "most_extreme"
#>
#> $death_outliers[[3]]
#> [1] "two_most_extreme"conditions, which is a list of conditions (we’ll
define this later)
expand returns a table where each row corresponds to
a single analysis path (i.e., a single universe). This view provides the
user with the information of which choices have resulted in the analysis
path, along with the entire unevaluated code expression corresponding to
each analysis. Analysts can use this table to explore multiverse
specifications with all the tools available in R and RStudio for
exploring data tables.
expand(M)
#> # A tibble: 3 × 6
#> .universe death_outliers .parameter_assignment .code .results .errors
#> <int> <chr> <list> <list> <list> <list>
#> 1 1 no_exclusion <named list [1]> <named list> <env> <lgl>
#> 2 2 most_extreme <named list [1]> <named list> <env> <lgl>
#> 3 3 two_most_extreme <named list [1]> <named list> <env> <lgl>code, which is the code that the user passes to the
multiverse to conduct a multiverse analysis. However, we do not execute
this code and it is stored unevaluated. The user can interactively edit
and rewrite this code, and can execute it for the current analysis or
the entire multiverse using dedicated functions.code(M)
#> [[1]]
#> df <- hurricane_data
#>
#> [[2]]
#> df.filtered <- filter(
#> df,
#> branch(
#> death_outliers,
#> "no_exclusion" ~ TRUE,
#> "most_extreme" ~ name != "Katrina",
#> "two_most_extreme" ~ !(name %in% c("Katrina", "Audrey"))
#> )
#> )extract_variables(M, <variable names>) extracts
the supplied variable from the results of each analysis path, returning
a table similar to the output of expand(M), but with new
columns for each variable that has been extracted. This would allow an
analyst to, for example, extract summary statistics or even entire data
tables from all universes simultaneously. These columns can easily be
turned into long format data tables using the tidyverse
packages and then visualized using the ggplot2 packageextract_variables(M, df.filtered)
#> # A tibble: 3 × 7
#> .universe death_outliers .parameter_assignment .code .results .errors
#> <int> <chr> <list> <list> <list> <list>
#> 1 1 no_exclusion <named list [1]> <named list> <env> <lgl>
#> 2 2 most_extreme <named list [1]> <named list> <env> <lgl>
#> 3 3 two_most_extreme <named list [1]> <named list> <env> <lgl>
#> # ℹ 1 more variable: df.filtered <named list>Subsequent branch calls will progressively expand the multiverse, by enumerating all possible combinations. We will now expand our multiverse to include other possible decision points in the analysis where reasonable alternatives could have been chosen. For instance, the researchers could have:
damage variable, as it is a
positive only value with a long right-tailThis would result in 3 × 2 × 2 = 12 analysis paths.
```{multiverse label = variable_definitions, inside = M}
df.filtered <- df.filtered |>
mutate(
femininity = branch(femininity_calculation,
"masfem" ~ masfem,
"female" ~ female
),
damage = branch(damage_transform,
"no_transform" ~ identity(dam),
"log_transform" ~ log(dam)
)
)
```The next step in this multiverse analysis is to estimate the effect
of femininity on deaths using linear
regression. There are multiple decisions involved at this step. We take
this opportunity to introduce certain scenarios that an analyst may
encounter while attempting to create a multiverse, that may be difficult
to discover but are supported by the library.
branch()One way of implementing this regression analysis may be a poisson model with the number of deaths caused by the hurricane as the response variable. Recall that this is specified as:
fit = glm(death ~ masfem * dam + masfem * zpressure, data = df.filtered, family = "poisson")Although this is a reasonable choice for count data, one can also argue for a log-linear regression model instead, as count data such as deaths tend to be approximately log-normally distributed.
Specifying this in a multiverse analysis may require changes in two
different locations in the code: the specification of the
deaths dependent variable and the value of the
family argument. However, these are not two separate
decisions, but rather a consequence of the same analysis parameter: the
choice of model. Often, a single analysis parameter will require the
analyst to change the code in more than one location. To represent these
semantics, multiverse allows us to re-use the same analysis parameter in
multiple branch() statements, so long as each
branch() uses the exact same set of analysis options. In a
branch on a previously defined parameter, option names must be the same,
but the code for each option can be different. Thus, we represent the
consequences of the choice of model with a single analysis parameter:
model. We insert two branch() statements using this parameter, one to
set the variable transformation and one to set the family.
```{multiverse label = variable_definitions, inside = M}
fit <- glm(branch(model,
"linear" ~ log(death+1),
"poisson" ~ death
) ~ femininity * damage + femininity * zpressure,
family = branch(model,
"linear" ~ gaussian,
"poisson" ~ poisson
), data = df.filtered)
```Another decision that was made at this step was the choice of
predictors, which includes the interaction between
femininity and damage, and between
femininity and zpressure. Here, the predictors
damage and zpressure are used as measures of
the storm severity, with the interaction between femininity and damage
indicating whether the main effect is stronger in more “destructive” or
“severe” storms. Yet again, there are other reasonable approaches to
study the primary effect which may include no interaction term
or only include interactions between femininity and variables such as
pressure, wind or category in conjunction with the interaction between
femininity and damage.
In a multiverse analysis, there may arise such dependencies between
two or more analysis parameters that make certain analysis paths
inconsistent, or even impossible. In other words, the applicability of
some analysis options may be conditional on a previous, upstream
decision. By default, multiverse assumes all combinations of options are
valid. However, it provides a flexible way to specify that an analysis
option is incompatible with previously-specified analysis options. These
dependencies can be specified using the %when% operator
followed by a boolean expression, right after the option name. Here,
interaction term between femininity and
zpressure only make sense in the presence of the
interaction involving damage, so we use a
%when% expression in the definition of the
other_predictors analysis parameter.
This results in the following multiverse specification (for now, let’s ignore the previous decision on choice of models):
```{multiverse label = variable_definitions, inside = M}
fit <- glm(death ~
branch(main_interaction,
"no" ~ femininity + damage,
"yes" ~ femininity * damage
) + branch(other_predictors,
"none" ~ NULL,
"pressure" %when% (main_interaction == "yes") ~ femininity * zpressure,
"wind" %when% (main_interaction == "yes") ~ femininity * zwind,
"category" %when% (main_interaction == "yes") ~ femininity * zcat,
"all" %when% (main_interaction == "yes") ~ femininity * z3,
"all_no_interaction" %when% (main_interaction == "no") ~ z3
), family = "poisson", data = df)
```For more details on how this can be done, as well as other details on conditions, please refer to vignette(conditions).
As with code chunks in a typical computational notebook, users can execute a multiverse code chunk in the interactive editor in RStudio. When a user executes a single code chunk, multiverse internally transforms the input from that code chunk into one unevaluated expression (R’s internal representation of an abstract syntax tree) for each unique combination of analysis options and immediately executes the default analysis: the analysis path obtained by taking the first analysis option at each decision point. The default analysis is executed in the current active R environment (i.e. the same environment that regular R code blocks are executed in — the R Global Environment). Thus, the result of the default analysis is always accessible to the user. The output of an executed code chunk (text or visualisation) is displayed immediately below it, mimicking notebook code chunks
```{multiverse label = default-m-3, inside = M}
fit = glm(branch(model, "linear" ~ log(death + 1), "poisson" ~ death) ~
branch(main_interaction,
"no" ~ femininity + damage,
"yes" ~ femininity * damage
) + branch(other_predictors,
"none" ~ NULL,
"pressure" %when% (main_interaction == "yes") ~ femininity * zpressure,
"wind" %when% (main_interaction == "yes") ~ femininity * zwind,
"category" %when% (main_interaction == "yes") ~ femininity * zcat,
"all" %when% (main_interaction == "yes") ~ femininity * z3,
"all_no_interaction" %when% (main_interaction == "no") ~ z3
) + branch(covariates, "1" ~ NULL, "2" ~ year:damage, "3" ~ post:damage),
family = branch(model, "linear" ~ "gaussian", "poisson" ~ "poisson"),
data = df)
```During interactive use (i.e. when running code chunks individually in
RMarkdown), the following code chunk illustrates this behavior. Even
though the variable fit was defined in a multiverse code
block, since the default analysis is executed in the active R
environment, the version corresponding to the default analysis can be
accessed directly in R:
broom::tidy(fit)Note: this behavior is not permitted when a notebook is being
knit—rendered to HTML (or some other format) using knitr.
This is because we cannot control how code is executed when knitting,
and we want to avoid providing the user with a surprising result.
Instead, we through an error. If your code is running perfectly fine in
a script file or markdown notebook, and only throwing an error when
knitting with a message similar to
! object 'fit' not found, this is likely because you are
trying to access objects declared within a multiverse code block using
an R code block.
Instead, if we want to output the results of the default (or any particular) analysis while knitting, we should instead use:
extract_variable_from_universe(M, 1, fit) |>
broom::tidy()
#> # A tibble: 6 × 5
#> term estimate std.error statistic p.value
#> <chr> <dbl> <dbl> <dbl> <dbl>
#> 1 (Intercept) 2.09 0.0908 23.0 2.03e-117
#> 2 masfem 0.0454 0.0123 3.70 2.18e- 4
#> 3 dam 0.0000195 0.00000338 5.77 8.10e- 9
#> 4 zpressure 0.137 0.101 1.35 1.76e- 1
#> 5 masfem:dam 0.00000110 0.000000421 2.61 8.94e- 3
#> 6 masfem:zpressure 0.0253 0.0125 2.02 4.33e- 2Analysts can change which analysis path is executed by default. Inline code output of a single analysis path (and the ability to select that path) is meant to support the familiar trial and error workflow of data analysts and to aid debugging.
To execute all unique analysis paths in the multiverse, an analyst
can call execute_multiverse(M). We support local
parallelisation with an optional cores argument indicating the number of
cpu cores to use. The multiverse object can also be easily adapted to
use with existing parallel computing packages in R, such as future, to run
analyses across computing clusters.
For the default analysis, as it executes in the R environment, users
have access to the same set of debugging utilities that R provides. When
the user executes the entire multiverse, the library outputs the error
message, a traceback—an object containing the entire call stack that
caused the error—and the index of the corresponding analysis path in
which the error was encountered. The execution of the remaining analysis
paths in the multiverse are not halted if any errors are encountered.
The traceback is helpful to identify the location of the error, as often
R expressions return unidentifiable error messages.
execute_universe(<universe ID>) (universe ID are
found in the table output by expand(), see below) allows
analysts to execute a particular analysis path and reproduce errors
encountered in the execution of that specific path.
In this document, we covered details to help you quickly get started with this package. Please refer to the following vignettes for further information on:
multiverse can be used in different environments
such as in RMarkdown and RScripts. See
vignette("multiverse-in-rmd").multiverse
using branch, and how multiverse processes the
user-declared (multiverse DSL) code to create multiple
end-to-end executable R analysis code. See
vignette("branch").multiverse; conditions can be used to state when two steps
in a multiverse are incompatible with one another. See
vignette("conditions").vignette("visualising-multiverse").We also implement a series of other end-to-end multiverse implementations using this package to demonstrate how it might be used:
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.