The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

nuts: Convert European Regional Data in R

list(name = “Moritz Hennicke”, url = “https://hennicke.science/”, orcid_id = “0000-0001-6811-1821”) list(name = “Werner Krause”, url = “https://krausewe.github.io/”, orcid_id = “0000-0002-5069-7964”)

2024-07-13

Key Features

:::float-image

plot of chunk unnamed-chunk-3

Efficient offline conversion of European regional data.
Conversion between five NUTS versions: 2006, 2010, 2013, 2016, 2021.
Conversion between three regional levels: NUTS-1, NUTS-2, NUTS-3.
Ability to convert multiple NUTS versions at once when e.g. NUTS versions differ across countries and years. This scenario is common when working with data sourced from EUROSTAT.
(Dasymetric) Spatial interpolation based on five weights (regional area size, 2011 and 2018 population size, 2012 and 2018 built-up area) built from granular [100m x 100m] geodata by the European Commission’s Joint Research Center (JRC).

NUTS Codes

The Nomenclature of Territorial Units for Statistics (NUTS) is a geocode standard for referencing the administrative divisions of European countries. A NUTS code starts with a two-letter combination indicating the country.¹ The administrative subdivisions, or levels, are referred to with an additional number or a capital letter (NUTS-1). A second (NUTS-2) or third (NUTS-3) subdivision level is referred to with another digit each.

For example, the German district Northern Saxony (Nordsachsen) is located within the region Leipzig and the federate state Saxony.

NUTS-1: States
- DED: Saxony
NUTS-2: States/Government Regions
- DED5: Leipzig
NUTS-3: Districts
- DED53: Northern Saxony

Since administrative boundaries in Europe change for demographic, economic, political or other reasons, there are five different versions of the NUTS Nomenclature (2006, 2010, 2013, 2016, and 2021). The current version, effective from 1 January 2021, lists 104 regions at NUTS-1, 283 regions at NUTS-2, 1 345 regions at NUTS-3 level².

Spatial interpolation in a nutshell

When administrative units are restructured, regional data measured within old boundaries can be converted to the new boundaries under reasonable assumptions. The main task of this package is to use (dasymetric) spatial interpolation to accomplish this.

Let’s take the example of the German state Saxony in the figures below. Here, the NUTS-2 regions Leipzig (DED3 → DED5) and Chemnitz (DED1 → DED4) were reorganized. We are interested in the number of manure storage facilities in 2003 provided by EUROSTAT based on the 2006 NUTS version. A part of Leipzig was reassigned to Chemnitz (center plot), prompting us to recalculate the number of storage facilities in the 2010 version (right plot).

A simple approach is to redistribute manure storage facilities proportional to the transferred area, assuming equal distribution of manure storages across space. In a dasymetric approach, we could make use of built-up area, assuming that manure deposits are more likely to be found close to residential areas and economic sites. In our example, Leipzig lost about 7.7% ((\frac{5574}{72360})) of its built-up area. We re-calculate the number of manure storage facilities by computing 7.7% of Leipzig’s manure storages (\frac{5574}{72360} * 700 = 54), subtracting them from Leipzig and adding them to Chemnitz.

See the Section Spatial interpolation in detail for an in-depth description of the weighting procedure.

Maps of NUTS 3 regions Chemnitz and Leipzig in NUTS version 2003, between 2003 and 2006 and 2006. They visualize the example in the text in which Chemnitz contributes a part of its area to Leipzig.

Holdings with Manure Storage Facilities; BU = Built-up area in square meters; Sources: [Shapefiles](https://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/administrative-units-statistical-units/nuts) and [data](https://ec.europa.eu/eurostat/databrowser/view/PAT_EP_RTOT/default/table) are from EUROSTAT; Created using the [sf](https://r-spatial.github.io/sf/) package.

Usage

The package comes with three main functions:

nuts_classify() detects the NUTS version(s) and level(s) of a data set. Its output can be directly fed into the two other functions.
nuts_convert_version() converts your data to a desired NUTS version (2006, 2010, 2013, 2016, 2021). This transformation works in any direction.
nuts_aggregate() aggregates data to some upper-level NUTS code, i.e., it transforms NUTS-3 data to the NUTS-2 or NUTS-1 level (but not vice versa).

Workflow

The conversion can only be conducted after classifying the NUTS version(s) and level(s) of your data using the function nuts_classify(). This step ensures the validity and completeness of your NUTS codes before proceeding with the conversion.

Flow diagram that shows that conversion functions are run after classification.

Sequential workflow to convert regional NUTS data

Identifying NUTS version and level

The nuts_classify() function’s main purpose is to find the most suitable NUTS version and to identify the level of the data set. Below, you see an example using patent application data (per one million inhabitants) for Norway in 2012 at the NUTS-2 level. This data is again provided by EUROSTAT.

# Load packages
library(nuts)
library(dplyr)
library(stringr)

# Loading and subsetting Eurostat data
data(patents, package = "nuts")

pat_n2 <- patents %>% 
  filter(nchar(geo) == 4) # NUTS-2 values

pat_n2_mhab_12_no <- pat_n2 %>%
  filter(unit == "P_MHAB") %>% # Patents per one million inhabitants
  filter(time == 2012) %>% # 2012
  filter(str_detect(geo, "^NO")) %>%  # Norway
  dplyr::select(-unit)

# Classifying the Data
pat_classified <- nuts_classify(
  data = pat_n2_mhab_12_no,
  nuts_code = "geo"
  )

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country:

## ✔ All NUTS codes can be identified and classified.

## ✔ Unique NUTS version classified.

## ✔ No missing NUTS codes.

The function returns a list with three items. These items can be called directly from the output object (data$...) or retrieved using the three helper functions nuts_get_data(), nuts_get_version(), and nuts_get_missing().

The first item gives the original data set augmented with the columns from_version, from_level, and country, indicating the NUTS version that best suits the data. All functions of the package always group NUTS codes across country names which are automatically generated from the provided NUTS codes.

Below, you see that all data entries correspond to the 2016 NUTS version.

# pat_classified$data # Call list item directly or...
nuts_get_data(pat_classified) # ...use helper function

## # A tibble: 7 × 6
##   from_code from_version from_level country  time values
##   <chr>     <chr>             <dbl> <chr>   <dbl>  <dbl>
## 1 NO01      2016                  2 Norway   2012  125. 
## 2 NO02      2016                  2 Norway   2012   13.2
## 3 NO03      2016                  2 Norway   2012   57.4
## 4 NO04      2016                  2 Norway   2012  110. 
## 5 NO05      2016                  2 Norway   2012   48.9
## 6 NO06      2016                  2 Norway   2012  145. 
## 7 NO07      2016                  2 Norway   2012   16.5

The second item provides an overview of the share of matching NUTS codes for each of the five existing NUTS versions. The overlap is computed within country and possibly additional groups (if provided via the group_vars argument).

# pat_classified$versions_data # Call list item directly or...
nuts_get_version(pat_classified) # ...use helper function

## # A tibble: 5 × 3
##   from_version country overlap_perc
##   <chr>        <chr>          <dbl>
## 1 2016         Norway         100  
## 2 2013         Norway         100  
## 3 2010         Norway         100  
## 4 2006         Norway         100  
## 5 2021         Norway          42.9

The third item gives all NUTS codes that are missing across groups. Such missing codes might lead to conversion errors and are, by default, omitted from all conversion procedures. In our example, no NUTS codes are missing.

# pat_classified$missing_data # Call list item directly or...
nuts_get_missing(pat_classified) # ...use helper function

## # A tibble: 0 × 4
## # ℹ 4 variables: from_code <chr>, from_version <chr>,
## #   from_level <dbl>, country <chr>

Converting data between NUTS versions

Once the NUTS version and level of the original data are identified, you can easily convert the data to any other NUTS version. Here is an example of transforming the 2013 Norwegian data to the 2021 NUTS version. Between 2016 and 2021, the number of NUTS-2 regions in Norway decreased by one as the borders of six regions were transformed. The maps below show the affected regions. We provide the classified NUTS data, specify the target NUTS version for data transformation, and supply the variable containing the values to be interpolated. It is important to indicate the variable type in the named input-vector since the interpolation approaches differ for absolute and relative values.

# Converting Data to 2021 NUTS version
pat_converted <- nuts_convert_version(
  data = pat_classified,
  to_version = "2021",
  variables = c("values" = "relative")
)

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country:

## ℹ Converting NUTS codes in 1 version 2016 to version 2021.

## ✔ All NUTS codes can be converted.

## ✔ Version is unique.

## ✔ No missing NUTS codes.

Two maps of patents per 1M habitants in Norwegian NUTS 2 regions in NUTS version 2016 and converted to NUTS version 2021

Converting patent data between versions; Sources: [Shapefiles](https://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/administrative-units-statistical-units/nuts) and [data](https://ec.europa.eu/eurostat/databrowser/view/PAT_EP_RTOT/default/table?lang=en) are from EUROSTAT; Created using the [sf](https://r-spatial.github.io/sf/) package.

The output below displays the corresponding data frames based on the original and converted NUTS codes. The original data set comprises of seven observations, whereas the converted data set contains six. The regions NO01, NO03, NO04, and NO05 are lost, while NO08, NO09, and NO0A are now listed.

pat_n2_mhab_12_no

## # A tibble: 7 × 3
##   geo    time values
##   <chr> <dbl>  <dbl>
## 1 NO01   2012  125. 
## 2 NO02   2012   13.2
## 3 NO03   2012   57.4
## 4 NO04   2012  110. 
## 5 NO05   2012   48.9
## 6 NO06   2012  145. 
## 7 NO07   2012   16.5

pat_converted

## # A tibble: 6 × 4
##   to_code to_version country values
##   <chr>   <chr>      <chr>    <dbl>
## 1 NO02    2021       Norway    13.2
## 2 NO06    2021       Norway   143. 
## 3 NO07    2021       Norway    16.5
## 4 NO08    2021       Norway    71.0
## 5 NO09    2021       Norway    83.0
## 6 NO0A    2021       Norway    58.9

Converting multiple variables simultaneously

You can also convert multiple variables at once. Below, we add the number of patent applications per 1000 inhabitants as a second variable:

# Converting Multiple Variables
pat_n2_mhab_12_no %>%
  mutate(values_per_thous = values * 1000) %>%
  nuts_classify(
    data = .,
    nuts_code = "geo"
    ) %>%
  nuts_convert_version(
    data = .,
    to_version = "2021",
    variables = c("values" = "relative",
                  "values_per_thous" = "relative")
  )

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country:

## ✔ All NUTS codes can be identified and classified.

## ✔ Unique NUTS version classified.

## ✔ No missing NUTS codes.

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country:

## ℹ Converting NUTS codes in 1 version 2016 to version 2021.

## ✔ All NUTS codes can be converted.

## ✔ Version is unique.

## ✔ No missing NUTS codes.

## # A tibble: 6 × 5
##   to_code to_version country values values_per_thous
##   <chr>   <chr>      <chr>    <dbl>            <dbl>
## 1 NO02    2021       Norway    13.2           13239 
## 2 NO06    2021       Norway   143.           143106.
## 3 NO07    2021       Norway    16.5           16463 
## 4 NO08    2021       Norway    71.0           71037.
## 5 NO09    2021       Norway    83.0           82964.
## 6 NO0A    2021       Norway    58.9           58904.

Converting grouped data

Longitudinal regional data, as commonly supplied by EUROSTAT, often comes with varying NUTS versions across countries and years (and other dimensions). It is possible to harmonize data across such groups with the group_vars argument in nuts_classify(). Below, we transform data within country and year groups for Sweden, Slovenia, and Croatia to the 2021 NUTS version.

# Classifying grouped data (time)
pat_n2_mhab_sesihr <- pat_n2 %>%
    filter(unit == "P_MHAB") %>%
    filter(str_detect(geo, "^SE|^SI|^HR"))

pat_classified <- nuts_classify(nuts_code = "geo", data = pat_n2_mhab_sesihr,
    group_vars = "time")

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country and time:

## ✔ All NUTS codes can be identified and classified.

## ✔ Unique NUTS version classified.

## ✔ No missing NUTS codes.

Note that the detected best-fitting NUTS versions differ across countries:

nuts_get_data(pat_classified) %>%
    group_by(country, from_version) %>%
    tally()

## # A tibble: 3 × 3
## # Groups:   country [3]
##   country  from_version     n
##   <chr>    <chr>        <int>
## 1 Croatia  2016            24
## 2 Slovenia 2010            26
## 3 Sweden   2021           104

The grouping is stored and passed on to the conversion function:

# Converting grouped data (Time)
pat_converted <- nuts_convert_version(
  data = pat_classified,
  to_version = "2021",
  variables = c("values" = "relative")
)

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country and time:

## ℹ Converting NUTS codes in 3 versions 2016, 2021, and 2010 to version
##   2021.

## ✔ All NUTS codes can be converted.

## ✔ Version is unique.

## ✔ No missing NUTS codes.

Conveniently, the group argument can also be used to transform higher dimensional data. Below, we include two indicators for patent applications to convert data that varies at the indicator-year-country-NUTS code level.

# Classifying and converting multi-group data
pat_n2_mhabmact_12_sesihr <- pat_n2 %>%
  filter(unit %in% c("P_MHAB", "P_MACT")) %>%
  filter(str_detect(geo, "^SE|^SI|^HR"))

pat_converted <- pat_n2_mhabmact_12_sesihr %>%
  nuts_classify(
    data = .,
    nuts_code = "geo",
    group_vars = c("time", "unit")
  ) %>%
  nuts_convert_version(
    data = .,
    to_version = "2021",
    variables = c("values" = "relative")
  )

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country, time, and unit:

## ✔ All NUTS codes can be identified and classified.

## ✔ Unique NUTS version classified.

## ✔ No missing NUTS codes.

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country, time, and unit:

## ℹ Converting NUTS codes in 3 versions 2016, 2021, and 2010 to version
##   2021.

## ✔ All NUTS codes can be converted.

## ✔ Version is unique.

## ✔ No missing NUTS codes.

Converting data between NUTS levels

The nuts_aggregate() function facilitates the aggregation of data from lower NUTS levels to higher ones using spatial weights. This enables users to summarize variables upward from the NUTS-3 level to NUTS-2 or NUTS-1 levels. It is important to note that this function does not support disaggregation since this comes with strong assumptions about the spatial distribution of a variable’s values.

In the following example, we illustrate how to aggregate the total number of patent applications in Sweden from NUTS-3 to higher levels. The functions below return a warning concerning non-identifiable NUTS codes. See Non-identified NUTS codes for further information.

data("patents", package = "nuts")
# Aggregating data from NUTS-3 to NUTS-2 and NUTS-1
pat_n3 <- patents %>% 
  filter(nchar(geo) == 5)

pat_n3_nr_12_se <- pat_n3 %>%
  filter(unit %in% c("NR")) %>%
  filter(time == 2012) %>%
  filter(str_detect(geo, "^SE"))

pat_classified <- nuts_classify(
  data = pat_n3_nr_12_se,
  nuts_code = "geo"
  )

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country:

## ! These NUTS codes cannot be identified or classified: SEXXX and
##   SEZZZ.

## ✔ Unique NUTS version classified.

## ✔ No missing NUTS codes.

pat_level2 <- nuts_aggregate(
  data = pat_classified,
  to_level = 2,
  variables = c("values" = "absolute")
)

##

## ── Aggregating level of NUTS codes ───────────────────────────────────

## Within groups defined by country:

## ℹ Aggregate from NUTS regional level 3 to 2.

## ✖ These NUTS codes cannot be converted and are dropped: SEXXX and
##   SEZZZ.

## ✔ Version is unique.

## ✔ No missing NUTS codes.

pat_level1 <- nuts_aggregate(
  data = pat_classified,
  to_level = 1,
  variables = c("values" = "absolute")
)

##

## ── Aggregating level of NUTS codes ───────────────────────────────────

## Within groups defined by country:

## ℹ Aggregate from NUTS regional level 3 to 1.

## ✖ These NUTS codes cannot be converted and are dropped: SEXXX and
##   SEZZZ.

## ✔ Version is unique.

## ✔ No missing NUTS codes.

Three maps of Sweden with patent applications at the NUTS 3 level and aggregated to NUTS level 2 and 1.

Aggregating patents from NUTS 3 to NUTS 2 and NUTS 1; Sources: [Shapefiles](https://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/administrative-units-statistical-units/nuts) and [data](https://ec.europa.eu/eurostat/databrowser/view/PAT_EP_RTOT/default/table?lang=en) are from EUROSTAT; Created using the [sf](https://r-spatial.github.io/sf/) package.

Inconsistent versions and levels

Non-identified NUTS codes

If the input data contains NUTS codes that cannot be identified in any NUTS version, the output of classify_nuts lists all of these codes. All conversion procedures (nuts_convert_version() and nuts_aggregate()) will work as expected while ignoring values for these regions.

The example below classifies 2012 patent data from Denmark. The original EUROSTAT data contains the codes DKZZZ and DKXXX, which are not part of the conversion matrices. Codes ending with the letter Z refer to “Extra-Regio” territories. These codes collect statistics for territories that cannot be attached to a certain region.³ Codes ending with the letter X refer to observations with unknown regions.

pat_n3.nr.12.dk <- pat_n3 %>%
  filter(unit %in% c("NR")) %>%
  filter(time == 2012) %>%
  filter(str_detect(geo, "^DK"))

pat_classified <- nuts_classify(
  data = pat_n3.nr.12.dk, 
  nuts_code = "geo"
  )

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country:

## ! These NUTS codes cannot be identified or classified: DKXXX and
##   DKZZZ.

## ✔ Unique NUTS version classified.

## ✔ No missing NUTS codes.

Missing NUTS codes

nuts_classify() also checks whether the NUTS codes provided are complete (or values of a variable that the user wants to convert are missing for a region). Missing values in the input data will, by default, result in missing values for all affected transformed regions in the output data.

The example with Slovenia below illustrates this case.

pat_n3_nr_12_si <- pat_n3 %>%
  filter(unit %in% c("NR")) %>%
  filter(time == 2012) %>%
  filter(str_detect(geo, "^SI"))

pat_classified <- nuts_classify(
  data = pat_n3_nr_12_si, 
  nuts_code = "geo"
  )

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country:

## ! These NUTS codes cannot be identified or classified: SIXXX and
##   SIZZZ.

## ✔ Unique NUTS version classified.

## ✖ Missing NUTS codes detected. See the tibble 'missing_data' in the
##   output.

nuts_classify() returns a warning that NUTS codes are missing in the input data. These codes can be inspected by calling nuts_get_missing(pat_classified).

nuts_get_missing(pat_classified)

## # A tibble: 2 × 4
##   from_code from_version from_level country 
##   <chr>     <chr>             <dbl> <chr>   
## 1 SI011     2010                  3 Slovenia
## 2 SI016     2010                  3 Slovenia

The resulting conversion returns three missing values as the source code SI011 transformed into SI031 and the region SI016 was split into SI036 and SI037.

nuts_convert_version(
  data = pat_classified, 
  to_version = "2021", 
  variables = c("values" = "absolute")
  ) %>% 
  filter(is.na(values))

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country:

## ℹ Converting NUTS codes in 1 version 2010 to version 2021.

## ✖ These NUTS codes cannot be converted and are dropped: SIXXX and
##   SIZZZ.

## ✔ Version is unique.

## ✖ Missing NUTS codes in data. No values are calculated for regions
##   associated with missing NUTS codes. Ensure that the input data is
##   complete.

## # A tibble: 3 × 4
##   to_code to_version country  values
##   <chr>   <chr>      <chr>     <dbl>
## 1 SI031   2021       Slovenia     NA
## 2 SI036   2021       Slovenia     NA
## 3 SI037   2021       Slovenia     NA

Users have the option missing_weights_pct to investigate the consequences of missing values in the converted data. Setting the argument to TRUE returns a variable that indicates the percentage of missing weights due to missing NUTS codes (or missing values in the variable). The data frame below shows three regions that could not be computed due to missing data. Values in region SI036 could not be computed since 97.9% of the weights are missing. Values for region SI037 are missing as well even though only 0.8% of its population-weighted area is missing.

nuts_convert_version(
  data = pat_classified, 
  to_version = "2021", 
  weight = "pop18",
  variables = c("values" = "absolute"),
  missing_weights_pct = TRUE
  ) %>% 
  arrange(desc(values_na_w))

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country:

## ℹ Converting NUTS codes in 1 version 2010 to version 2021.

## ✖ These NUTS codes cannot be converted and are dropped: SIXXX and
##   SIZZZ.

## ✔ Version is unique.

## ✖ Missing NUTS codes in data. No values are calculated for regions
##   associated with missing NUTS codes. Ensure that the input data is
##   complete.

## # A tibble: 12 × 5
##    to_code to_version country  values values_na_w
##    <chr>   <chr>      <chr>     <dbl>       <dbl>
##  1 SI031   2021       Slovenia  NA        100    
##  2 SI036   2021       Slovenia  NA         97.9  
##  3 SI037   2021       Slovenia  NA          0.802
##  4 SI032   2021       Slovenia   7.84       0    
##  5 SI033   2021       Slovenia   3.22       0    
##  6 SI034   2021       Slovenia  15.2        0    
##  7 SI035   2021       Slovenia   6.99       0    
##  8 SI038   2021       Slovenia   1.25       0    
##  9 SI041   2021       Slovenia  42.1        0    
## 10 SI042   2021       Slovenia   6.56       0    
## 11 SI043   2021       Slovenia   7.22       0    
## 12 SI044   2021       Slovenia   3.3        0

Using the the share of missing weights in combination with the option missing_rm, the nuts package allows to recover some of the missing regions approximately. We can achieve this by setting missing_rm to TRUE, effectively assuming 0 for missing values. In the next step we remove regions with a high share of missing weights from the output data again. The data frame below shows that values for SI037 could still be used assuming 0 patents for 0.8% of the missing population-weighted area to construct the region.

nuts_convert_version(
  data = pat_classified, 
  to_version = "2021", 
  weight = "pop18",
  variables = c("values" = "absolute"),
  missing_weights_pct = TRUE,
  missing_rm = TRUE
  ) %>% 
  filter(to_code %in% c("SI031", "SI036", "SI037")) %>% 
  mutate(values_imp = ifelse(values_na_w < 1, values, NA))

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country:

## ℹ Converting NUTS codes in 1 version 2010 to version 2021.

## ✖ These NUTS codes cannot be converted and are dropped: SIXXX and
##   SIZZZ.

## ✔ Version is unique.

## ✖ Missing NUTS codes in data. No values are calculated for regions
##   associated with missing NUTS codes. Ensure that the input data is
##   complete.

## # A tibble: 3 × 6
##   to_code to_version country  values values_na_w values_imp
##   <chr>   <chr>      <chr>     <dbl>       <dbl>      <dbl>
## 1 SI031   2021       Slovenia  0         100          NA   
## 2 SI036   2021       Slovenia  0.331      97.9        NA   
## 3 SI037   2021       Slovenia  4.02        0.802       4.02

Multiple NUTS levels within groups

The package does not allow for the conversion of multiple NUTS levels at once. The classification function will throw an error in this case. The conversion needs to be conducted for every level separately.

patents %>% 
  filter(nchar(geo) %in% c(4, 5), grepl("^EL", geo)) %>% 
  distinct(geo, .keep_all = T) %>% 
  nuts_classify(nuts_code = "geo", data = .)

## Error in `nuts_classify()`:
## ! Data contains NUTS codes from multiple levels (2 and 3).

Multiple NUTS versions within groups

Converting multiple NUTS versions within groups might lead to erroneous spatial interpolations since overlaps between regions of different versions are possible.

The example below illustrates this problem. We classify German and Italian manure storage facility data from EUROSTAT without specifying group_vars. Instead, we keep all unique NUTS codes to artificially create a data set containing different NUTS versions. nuts_classify() returns a warning and by inspecting the identified versions, we see that there are mixed versions within groups (the countries).

man_deit <- manure %>% 
  filter(grepl("^DE|^IT", geo)) %>%
  filter(nchar(geo) == 4, ) %>% 
  distinct(geo, .keep_all = T) %>% 
  nuts_classify(nuts_code = "geo", data = .)

##

## ── Classifying version of NUTS codes ─────────────────────────────────

## Within groups defined by country:

## ! These NUTS codes cannot be identified or classified: DEZZ.

## ✖ Multiple NUTS versions classified. See the tibble 'versions_data'
##   in the output.

## ✖ Missing NUTS codes detected. See the tibble 'missing_data' in the
##   output.

nuts_get_data(man_deit) %>% 
  group_by(country, from_version) %>% 
  tally()

## # A tibble: 5 × 3
## # Groups:   country [3]
##   country from_version     n
##   <chr>   <chr>        <int>
## 1 Germany 2006            38
## 2 Germany 2021             3
## 3 Italy   2006             9
## 4 Italy   2021            21
## 5 <NA>    <NA>             1

When proceeding to the conversion with either nuts_convert_version() or nuts_aggregate(), both functions will throw an error. For convenience, we added the option multiple_versions that subsets the supplied data to the dominant version within groups when specified with most_frequent. Hence, all codes from other, non-dominant versions are discarded.

Once we convert this data set, all NUTS regions unrecognized according to the 2006 (Germany) and 2021 (Italy) version are dropped automatically.

man_deit_converted <- nuts_convert_version(
  data = man_deit,
  to_version = 2021,
  variables = c("values" = "relative"),
  multiple_versions = "most_frequent"
)

##

## ── Converting version of NUTS codes ──────────────────────────────────

## Within groups defined by country:

## ℹ Converting NUTS codes in 2 versions 2006 and 2021 to version 2021.

## ✖ These NUTS codes cannot be converted and are dropped: DEZZ.

## ! Choosing most frequent version within group and dropping 12 rows.

## ✖ Missing NUTS codes in data. No values are calculated for regions
##   associated with missing NUTS codes. Ensure that the input data is
##   complete.

man_deit_converted %>% 
  group_by(country, to_version) %>% 
  tally()

## # A tibble: 2 × 3
## # Groups:   country [2]
##   country to_version     n
##   <chr>        <dbl> <int>
## 1 Germany       2021    38
## 2 Italy         2021    21

Spatial interpolation in detail

This section describes the spatial interpolation procedure. We first cover the logic of conversion tables and then explain the methods used in the package for converting versions and levels.

Changes in administrative boundaries

Below, Norwegian NUTS-2 regions for the versions 2016 and 2021 are shown. All regions apart from Norway’s most Northern region have been reorganized in this period.

Two maps of Norwegian NUTS-2 regions in version 2016 and 2021. The most Eastern and Southern regions have been affected most by administrative redistricting.

Norwegian NUTS-2 regions with boundary changes; Sources: [Shapefiles](https://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/administrative-units-statistical-units/nuts) from EUROSTAT; Created using the [sf](https://r-spatial.github.io/sf/) package.

The changes between the two versions can be summarized as follows:

Boundary changes of regions with continued NUTS codes

NO02 ceases a small area to the new NO08
NO06 makes small area gains from NO05

Changes to regions with discontinued NUTS codes

NO01 is absorbed by NO08
NO03 is split up between NO08 and NO09
NO04 divides into NO0A and NO09
NO05 largely becomes the new NO0A, and gives a small area to NO06

Spatial interpolation and conversion tables

To keep track of these changes, the nuts package uses two data sets:

Stocks: data(all_nuts_codes) contains all historical NUTS codes by NUTS version and country
Flows: data(cross_walks) contains the conversion tables between NUTS versions

They are based on data provided by the JRC. Both data sets can also be used by the user manually to explore specific conversion patterns more closely.

For Norway going from version 2016 to 2021 at NUTS level 2, the cross_walks can be easily subset as follows:

no_walks <- cross_walks %>%
  filter(nchar(from_code) == 4,
         from_version == 2016,
         to_version == 2021,
         grepl("^NO", from_code))

Which results in the following conversion table:

from_code	to_code	from_version	to_version	level	country	areaKm	pop18	pop11	artif_surf18	artif_surf12
NO01	NO08	2016	2021	2	Norway	5365.0	1268387.7	1131221.0	58104	55927
NO02	NO02	2016	2021	2	Norway	52072.3	370392.3	362070.7	60625	54887
NO02	NO08	2016	2021	2	Norway	517.6	15843.5	15019.0	1952	1813
NO03	NO08	2016	2021	2	Norway	19123.5	575350.1	535560.5	66876	62509
NO03	NO09	2016	2021	2	Norway	17414.4	403640.4	385648.8	50076	47799
NO04	NO09	2016	2021	2	Norway	16360.8	292218.9	272016.3	44779	42346
NO04	NO0A	2016	2021	2	Norway	9326.0	451949.5	416975.4	39112	36432
NO05	NO06	2016	2021	2	Norway	931.8	3510.2	3625.9	869	832
NO05	NO0A	2016	2021	2	Norway	47902.2	837246.8	790090.1	99951	94757
NO06	NO06	2016	2021	2	Norway	41029.0	447774.0	417827.7	47291	43630
NO07	NO07	2016	2021	2	Norway	112453.1	452720.0	437265.2	81907	79098

In addition to tracing the evolution of NUTS codes, the table contains flows of area, population and artificial surfaces between regions and versions. These flows were computed by the JRC with granular [100m x 100m] geographic data. The ggalluvial plot below visualizes the flows of area size between the NUTS-2 regions mapped above.

The alluvial plot shows population flows from NUTS version 2016 to 2021.

Alluvial plot illustrating area size flows; Created using the [ggalluvial](https://corybrunson.github.io/ggalluvial/) package.

To illustrate the main idea, the map below showcases population densities across NUTS-2 regions. As population is not uniformly distributed across space, weighting regions dependent on their area size comes with strong assumptions. For instance, region NO01 in version 2016, that contains the city of Oslo, makes a relatively modest geographical contribution to the new region NO08, but significantly bolsters the population of the latter. Assuming that the variable to be converted is correlated with population across space, the conversion can thus be refined using population weights to account for flows between different versions.

Two maps of Southern Norway with very granular population density and administrative boundaries of the 2016 and 2021 NUTS version. The region with the capital Olso and its adjacent region are highlighted in version 2016 that both contribute to a larger single region in version 2021.

Spatial distribution of population and boundary changes; Sources: [Shapefiles](https://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/administrative-units-statistical-units/nuts) and [population raster](https://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/population-distribution-demography/geostat) from EUROSTAT; Created using the [sf](https://r-spatial.github.io/sf/) and the [terra](https://rspatial.github.io/terra/reference/terra-package.html) packages.

Conversion methods

The following subsections describe the method used to convert absolute and relative values between versions and levels.

Conversion of absolute values between versions

In this example, we transform absolute values, the number of patent applications (NR) in Norway, from version 2016 to 2021, utilizing spatial interpolation based on the population distribution in 2018.

The conversion employs the cross_walks table, which includes population flow data (expressed in thousands) between two NUTS-2 regions from the source version to the target version. The function joins the variable of interest, NR, which varies across the departing NUTS-2 codes (from_code). The function initially calculates a weight (w) equal to the population flow’s share of the total population in the departing region in version 2016 (from_code):

from_code	to_code	from_version	to_version	NR	pop18	w
NO01	NO08	2016	2021	146	1268	1268/(1268) = 1
NO02	NO02	2016	2021	5	370	370/(370 + 15) = 0.96
NO02	NO08	2016	2021	5	15	15/(370 + 15) = 0.04
NO03	NO08	2016	2021	54	575	575/(575 + 403) = 0.59
NO03	NO09	2016	2021	54	403	403/(575 + 403) = 0.41
NO04	NO09	2016	2021	80	292	292/(292 + 451) = 0.39
NO04	NO0A	2016	2021	80	451	451/(292 + 451) = 0.61
NO05	NO06	2016	2021	41	3	3/(3 + 837) = 0
NO05	NO0A	2016	2021	41	837	837/(3 + 837) = 1
NO06	NO06	2016	2021	62	447	447/(447) = 1
NO07	NO07	2016	2021	7	452	452/(452) = 1

To obtain the number of patent applications at the desired 2021 version, the function summarizes the data for the new NUTS regions in version 2021 (to_code) by taking the population-weighted sum of all flows.

to_code	to_version	NR
NO02	2021	5 x 0.96 = 4.8
NO06	2021	41 x 0 + 62 x 1 = 62
NO07	2021	7 x 1 = 7
NO08	2021	146 x 1 + 5 x 0.04 + 54 x 0.59 = 178.06
NO09	2021	54 x 0.41 + 80 x 0.39 = 53.34
NO0A	2021	80 x 0.61 + 41 x 1 = 89.8

Conversion of relative values between versions

To convert relative values, such as the number of patent applications per 1000 inhabitants, nuts_convert_version() departs again from the conversion table seen above. We focus on the variable P_MHAB, patent applications per one million inhabitants. The function summarizes these relative values by computing the weighted average with respect to 2018 population flows.

to_code	to_version	P_MHAB
NO02	2021	(370 x 13)/(370) = 13
NO06	2021	(3 x 48 + 447 x 145)/(3 + 447) = 144
NO07	2021	(452 x 16)/(452) = 16
NO08	2021	(1268 x 125 + 15 x 13 + 575 x 57)/(1268 + 15 + 575) = 103
NO09	2021	(403 x 57 + 292 x 110)/(403 + 292) = 79
NO0A	2021	(451 x 110 + 837 x 48)/(451 + 837) = 70

Conversion of absolute values between NUTS levels

The function nuts_aggregate() aggregates from lower to higher order levels, e.g. from NUTS-3 to NUTS-2. Since higher order regions are perfectly split into lower order regions in the NUTS system, the function takes simply the sum of the values in case of absolute variables.

Conversion of relative values between NUTS levels

Relative values are aggregated in nuts_aggregate() by computing the weighted mean of all lower order regional levels. To convert, for example, the number of patent applications per one million inhabitants from NUTS-3 to NUTS-2, the function adds the population size in 2018.

nuts_3	nuts_2	pop18	P_MHAB
NO011	NO01	662	145
NO012	NO01	606	102
NO021	NO02	196	7
NO022	NO02	188	18
NO031	NO03	289	34
NO032	NO03	279	45
NO033	NO03	239	106
NO034	NO03	169	45
NO041	NO04	113	43
NO042	NO04	178	50
NO043	NO04	451	150
NO051	NO05	495	24
NO052	NO05	102	58
NO053	NO05	241	91
NO061	NO06	307	208
NO062	NO06	139	3
NO071	NO07	225	10
NO072	NO07	154	33

The number of patent applications at the NUTS-2 level is computed by the weighted average using NUTS-3 population numbers.

nuts_2	P_MHAB
NO01	(662 x 145 + 606 x 102)/(662 + 606) = 124
NO02	(196 x 7 + 188 x 18)/(196 + 188) = 12
NO03	(289 x 34 + 279 x 45 + 239 x 106 + 169 x 45)/(289 + 279 + 239 + 169) = 56
NO04	(113 x 43 + 178 x 50 + 451 x 150)/(113 + 178 + 451) = 109
NO05	(495 x 24 + 102 x 58 + 241 x 91)/(495 + 102 + 241) = 47
NO06	(307 x 208 + 139 x 3)/(307 + 139) = 144
NO07	(225 x 10 + 154 x 33)/(225 + 154) = 19

Citation

Please support the development of open science and data by citing the JRC and us in your work:

Joint Research Centre (2022) NUTS converter. https://urban.jrc.ec.europa.eu/tools/nuts-converter
Hennicke M, Krause W (2024). nuts: Convert European Regional Data. doi:10.5281/zenodo.10573056 https://doi.org/10.5281/zenodo.10573056, R package version 1.1.0, https://docs.ropensci.org/nuts/.

Bibtex Users:

@Manual{,
  title = {NUTS converter},
  author = {Joint Research Centre},
  year = {2022},
  url = {https://urban.jrc.ec.europa.eu/tools/nuts-converter},
}

@Manual{,
  title = {nuts: Convert European Regional Data},
  author = {Moritz Hennicke and Werner Krause},
  year = {2024},
  note = {R package version 1.1.0},
  url = {https://docs.ropensci.org/nuts/},
  doi = {10.5281/zenodo.10573056},
}

Eurostat In the case of Greece this code was changed from GR to EL in 2011. ↩
2022 report of the European Union ↩
Such as air-space, territorial waters and the continental shelf, embassies, consulates, military bases and deposits of oil, natural gas, etc. in international waters. ↩

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.