The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

r2d3: R Interface to D3 Visualizations

R-CMD-check CRAN status Codecov test coverage

The r2d3 package provides a suite of tools for using D3 visualizations with R, including:


With r2d3, you can bind data from R to D3 visualizations like the ones found on https://github.com/d3/d3/wiki/Gallery, https://bl.ocks.org/, and https://vida.io/explore:

D3 visualizations created with r2d3 work just like R plots within RStudio, R Markdown documents, and Shiny applications.

Getting Started

First, install the package from GitHub as follows:

devtools::install_github("rstudio/r2d3")

Next, install the preview release of RStudio v1.2 of RStudio (you need this version of RStudio to take advantage of various integrated tools for authoring D3 scripts with r2d3).

Once you’ve installed the package and the RStudio v1.2 preview release you have the tools required to work with r2d3. Below, we’ll describe basic workflow within RStudio and techniques for including visualizations in R Markdown and Shiny applications.

About D3

Creating data visualizations with r2d3 requires lots of custom SVG graphics programming (similar to creating custom grid graphics in R). It’s therefore a good fit when you need highly custom visualizations that aren’t covered by existing libraries. If on the other hand you are looking for pre-fabricated D3 / JavaScript visualizations, check out the packages created using htmlwidgets, which provide a much higher level interface.

If you are completely new to D3, you may also want to check out the article on Learning D3 before proceeding further.

D3 Scripts

To use r2d3, write a D3 script and then pass R data to it using the r2d3() function. For example, here’s a simple D3 script that draws a bar chart (“barchart.js”):

// !preview r2d3 data=c(0.3, 0.6, 0.8, 0.95, 0.40, 0.20)

var barHeight = Math.floor(height / data.length);

svg
  .selectAll("rect")
  .data(data)
  .enter()
  .append("rect")
  .attr("width", function (d) {
    return d * width;
  })
  .attr("height", barHeight)
  .attr("y", function (d, i) {
    return i * barHeight;
  })
  .attr("fill", "steelblue");

To render the script within R you call the r2d3() function:

library(r2d3)
r2d3(data=c(0.3, 0.6, 0.8, 0.95, 0.40, 0.20), script = "barchart.js")

Which results in the following visualization:

D3 Variables

Note that data is provided to the script using the data argument to the r2d3() function. This data is then automatically made available to the D3 script. There are a number of other special variables available within D3 scripts, including:

When you are learning D3 or translating D3 examples for use with R it’s important to keep in mind that D3 examples will generally include code to load data, create an SVG or other root element, and establish a width and height for the visualization.

On the other hand with r2d3, these variables are provided automatically so do not need to be created. The reasons these variables are provided automatically are:

  1. So that you can dynamically bind data from R to visualizations; and

  2. So that r2d3 can automatically handle dynamic resizing for your visualization. Most D3 examples have a static size. This if fine for an example but not very robust for including the visualization within a report, dashboard, or application.

D3 Preview

The RStudio v1.2 preview release of RStudio includes support for previewing D3 scripts as you write them. To try this out, create a D3 script using the new file menu:

A simple template for a D3 script (the barchart.js example shown above) is provided by default. You can use the Preview command (Ctrl+Shift+Enter) to render the visualization:

You might wonder where the data comes from for the preview. Note that there is a special comment at the top of the D3 script:

// !preview r2d3 data=c(0.3, 0.6, 0.8, 0.95, 0.40, 0.20)

This comment enables you to specify the data (along with any other arguments to the r2d3() function) to use for the preview.

R Markdown

You can include D3 visualizations in an R Markdown document or R Notebook. You can do this by calling the r2d3() function from within an R code chunk:

---
output: html_document
---

```{r}
library(r2d3)
r2d3(data=c(0.3, 0.6, 0.8, 0.95, 0.40, 0.20), script = "barchart.js")
```

You can also include D3 visualization code inline using the d3 R Markdown engine:

```{r setup}
library(r2d3)
bars <- c(10, 20, 30)
```
```{d3 data=bars, options=list(color = 'orange')}
svg.selectAll('rect')
  .data(data)
  .enter()
    .append('rect')
      .attr('width', function(d) { return d * 10; })
      .attr('height', '20px')
      .attr('y', function(d, i) { return i * 22; })
      .attr('fill', options.color);
```

Note that in order to use the d3 engine you need to add library(r2d3) to the setup chunk (as illustrated above).

Shiny

The renderD3() and d3Output() functions enable you to include D3 visualizations within Shiny applications:

library(shiny)
library(r2d3)

ui <- fluidPage(
  inputPanel(
    sliderInput("bar_max", label = "Max:",
                min = 0.1, max = 1.0, value = 0.2, step = 0.1)
  ),
  d3Output("d3")
)

server <- function(input, output) {
  output$d3 <- renderD3({
    r2d3(
      runif(5, 0, input$bar_max),
      script = system.file("examples/baranims.js", package = "r2d3")
    )
  })
}

shinyApp(ui = ui, server = server)

See the article on Using r2d3 with Shiny to learn more (including how to create custom Shiny inputs that respond to user interaction with D3 visualizations).

Learning More

To learn the basics of D3 and see some examples that might inspire your own work, check out:

For next steps on learning on how to use r2d3, see these articles:

Once you are familar with the basics, check out these articles on more advanced topics:

Using r2d3 with Shiny - Deriving insights from data is streamlined when users are able to modify a Shiny input, or click on a D3 visualization, and that action produces new results.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.