The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

rdecision

CRAN status Codecov test coverage

The goal of rdecision is to provide methods for assessing health care interventions using cohort models (decision trees and semi-Markov models) which can be constructed using only a few lines of R code. Mechanisms are provided for associating an uncertainty distribution with each source variable and for ensuring transparency of the mathematical relationships between variables. The package terminology follows Briggs et al “Decision Modelling for Health Economic Evaluation”1.

Installation

You can install the released version of rdecision from CRAN with:

install.packages("rdecision")

Examples

A decision tree with parameter uncertainty

Consider the fictitious and idealized decision problem of choosing between providing two forms of lifestyle advice, offered to people with vascular disease, which reduce the risk of needing an interventional procedure. It is assumed that the interventional procedure is the insertion of a stent, that the current standard of care is the provision of dietary advice, and that the new form of care is enrolment on an exercise programme. To assess the decision problem, we construct a model from the perspective of a healthcare provider, with a time horizon of one year, and assume that the utility of both forms of advice is equal. The model evaluates the incremental benefit of the exercise programme as the incremental number of interventional procedures avoided against the incremental cost of the exercise programme.

The cost to a healthcare provider of the interventional procedure (e.g., inserting a stent) is 5000 GBP; the cost of providing the current form of lifestyle advice, an appointment with a dietician (“diet”), is 50 GBP and the cost of providing an alternative form, attendance at an exercise programme (“exercise”), is 750 GBP. None of the costs are subject to uncertainty, and are modelled as constant model variables.

cost_diet <- ConstModVar$new("Cost of diet programme", "GBP", 50.0)
cost_exercise <- ConstModVar$new("Cost of exercise programme", "GBP", 750.0)
cost_stent <- ConstModVar$new("Cost of stent intervention", "GBP", 5000.0)

If an advice programme is successful, there is no need for an interventional procedure. In a small trial of the “diet” programme, 12 out of 68 patients (17.6%) avoided having a procedure, and in a separate small trial of the “exercise” programme 18 out of 58 patients (31.0%) avoided the procedure. It is assumed that the baseline characteristics in the two trials were comparable. The trial results are represented as scalar integers.

s_diet <- 12L
f_diet <- 56L
s_exercise <- 18L
f_exercise <- 40L

The proportions of the two programmes being successful (i.e., avoiding an interventional procedure) are uncertain due to the finite size of each trial and are represented by model variables with uncertainties which follow Beta distributions. Probabilities of the failure of the programmes are calculated using expression model variables to ensure that the total probability associated with each chance node is one.

p_diet <- BetaModVar$new(
  alpha = s_diet, beta = f_diet, description = "P(diet)", units = ""
)
p_exercise <- BetaModVar$new(
  alpha = s_exercise, beta = f_exercise, description = "P(exercise)", units = ""
)

q_diet <- ExprModVar$new(
  rlang::quo(1.0 - p_diet), description = "1 - P(diet)", units = ""
)
q_exercise <- ExprModVar$new(
  rlang::quo(1.0 - p_exercise), description = "1 - P(exercise)", units = ""
)

The decision tree has one decision node, representing the single choice of the decision problem (i.e., between the two advice programmes), two chance nodes, representing whether each programme is a success or failure, and four leaf nodes (intervention or no intervention for each of the two programmes).

decision_node <- DecisionNode$new("Programme")
chance_node_diet <- ChanceNode$new("Outcome")
chance_node_exercise <- ChanceNode$new("Outcome")
leaf_node_diet_no_stent <- LeafNode$new("No intervention")
leaf_node_diet_stent <- LeafNode$new("Intervention")
leaf_node_exercise_no_stent <- LeafNode$new("No intervention")
leaf_node_exercise_stent <- LeafNode$new("Intervention")

There are two action edges emanating from the decision node, which represent the two choices, and four reaction edges, representing the consequences of the success and failure of each programme.

action_diet <- Action$new(
  decision_node, chance_node_diet, cost = cost_diet, label = "Diet"
)
action_exercise <- Action$new(
  decision_node, chance_node_exercise, cost = cost_exercise, label = "Exercise"
)
reaction_diet_success <- Reaction$new(
  chance_node_diet, leaf_node_diet_no_stent,
  p = p_diet, cost = 0.0, label = "Success"
)

reaction_diet_failure <- Reaction$new(
  chance_node_diet, leaf_node_diet_stent,
  p = q_diet, cost = cost_stent, label = "Failure"
)

reaction_exercise_success <- Reaction$new(
  chance_node_exercise, leaf_node_exercise_no_stent,
  p = p_exercise, cost = 0.0, label = "Success"
)

reaction_exercise_failure <- Reaction$new(
  chance_node_exercise, leaf_node_exercise_stent,
  p = q_exercise, cost = cost_stent, label = "Failure"
)

The decision tree model is constructed from the nodes and edges.

dt <- DecisionTree$new(
  V = list(
    decision_node,
    chance_node_diet,
    chance_node_exercise,
    leaf_node_diet_no_stent,
    leaf_node_diet_stent,
    leaf_node_exercise_no_stent,
    leaf_node_exercise_stent
  ),
  E = list(
    action_diet,
    action_exercise,
    reaction_diet_success,
    reaction_diet_failure,
    reaction_exercise_success,
    reaction_exercise_failure
  )
)

The method evaluate is used to calculate the costs and utilities associated with the decision problem. By default, it evaluates it once with all the model variables set to their expected values and returns a data frame.

rs <- dt$evaluate()

Examination of the results of evaluation shows that the expected per-patient net cost of the diet advice programme is 4,168 GBP and the per-patient net cost of the exercise programme is 4,198 GBP; i.e., the net cost of the exercise programme exceeds the diet programme by 31 GBP per patient. The savings associated with the greater efficacy of the exercise programme do not offset the increased cost of delivering it.

To estimate the uncertainty of the relative effectiveness, the probabilities of the success proportions of the two treatments can be represented as model variables who uncertainty follows a Beta distribution, and the decision tree re-evaluated.

action_diet$set_cost(cost_diet)
action_exercise$set_cost(cost_exercise)
reaction_diet_success$set_probability(p_diet)

reaction_diet_failure$set_probability(q_diet)
reaction_diet_failure$set_cost(cost_stent)

reaction_exercise_success$set_probability(p_exercise)

reaction_exercise_failure$set_probability(q_exercise)
reaction_exercise_failure$set_cost(cost_stent)
N <- 1000L
rs <- dt$evaluate(setvars = "random", by = "run", N = N)

The confidence interval of the cost saving is estimated by repeated evaluation of the tree, each time sampling from the uncertainty distribution of the two probabilities using, for example, DT$evaluate(setvars = "random", N = 1000L) and inspecting the resulting data frame. From 1000 runs, the 95% confidence interval of the per patient cost saving is -763.93 GBP to 662.84 GBP, with 46.3% being cost saving. Although the exercise programme is more costly to provide than the dietary advice programme, it is more effective and leads to saving overall because fewer costly interventional procedures are needed. However, due to the uncertainties of the effectiveness of each programme, it can be concluded that more evidence is required to be confident that the exercise programme is cost saving overall.

The method threshold is used to find the threshold of one of the model variables at which the cost difference reaches zero. By univariate threshold analysis, the exercise program will be cost saving when its cost of delivery is less than 719 GBP or when its success rate is greater than 31.74%. These thresholds are also subject to uncertainty.

A three-state Markov model

Sonnenberg and Beck2 introduced an illustrative example of a semi-Markov process with three states: “Well”, “Disabled” and “Dead” and one transition between each state, each with a per-cycle probability. In rdecision such a model is constructed as follows. Note that transitions from a state to itself must be specified if allowed, otherwise the state would be a temporary state.

# create states
s.well <- MarkovState$new(name = "Well", utility = 1.0)
s.disabled <- MarkovState$new(name = "Disabled", utility = 0.7)
s.dead <- MarkovState$new(name = "Dead", utility = 0.0)
# create transitions leaving rates undefined
E <- list(
  Transition$new(s.well, s.well),
  Transition$new(s.dead, s.dead),
  Transition$new(s.disabled, s.disabled),
  Transition$new(s.well, s.disabled),
  Transition$new(s.well, s.dead),
  Transition$new(s.disabled, s.dead)
)
# create the model
M <- SemiMarkovModel$new(V = list(s.well, s.disabled, s.dead), E)
# create transition probability matrix
snames <- c("Well", "Disabled", "Dead")
Pt <- matrix(
  data = c(0.6, 0.2, 0.2, 0.0, 0.6, 0.4, 0.0, 0.0, 1.0),
  nrow = 3L, byrow = TRUE,
  dimnames = list(source = snames, target = snames)
)
# set the transition rates from per-cycle probabilities
M$set_probabilities(Pt)

With a starting population of 10,000, the model can be run for 25 years as follows.

# set the starting populations
M$reset(c(Well = 10000.0, Disabled = 0.0, Dead = 0.0))
# cycle
MT <- M$cycles(25L, hcc.pop = FALSE, hcc.cost = FALSE)

The output, after rounding, of the cycles function is the Markov trace, shown below, which replicates Table 22. In more recent usage, cumulative utility is normally called incremental utility, and expressed per patient (i.e., divided by 10,000).

Years Well Disabled Dead Cumulative Utility
0 10000 0 0 0
1 6000 2000 2000 7400
2 3600 2400 4000 12680
3 2160 2160 5680 16352
23 0 1 9999 23749
24 0 0 10000 23749
25 0 0 10000 23750

Acknowledgements

In addition to using base R3, redecision relies heavily on the R6 implementation of classes4 and the rlang package for error handling and non-standard evaluation used in expression model variables5. Building the package vignettes and documentation relies on the testthat package6, the devtools package7 and rmarkdown10.

Underpinning graph theory is based on terminology, definitions and algorithms from Gross et al11, the Wikipedia glossary12 and links therein. Topological sorting of graphs is based on Kahn’s algorithm13. Some of the terminology for decision trees was based on the work of Kaminski et al14 and an efficient tree drawing algorithm was based on the work of Walker15. In semi-Markov models, representations are exported in the DOT language16.

Terminology for decision trees and Markov models in health economic evaluation was based on the book by Briggs et al1 and the output format and terminology follows ISPOR recommendations18.

Citations for examples used in vignettes are given in applicable vignette files.

References

1.
Briggs, A., Claxton, K. & Sculpher, M. Decision modelling for health economic evaluation. (Oxford University Press, 2006).
2.
Sonnenberg, F. A. & Beck, J. R. Markov models in medical decision making: A practical guide. Medical Decision Making 13, 322–338 (1993).
3.
R Core Team. R: A language and environment for statistical computing. (2021). at <https://www.R-project.org/>
4.
Chang, W. R6: Encapsulated classes with reference semantics. (2020). at <https://CRAN.R-project.org/package=R6>
5.
Henry, L. & Wickham, H. Rlang: Functions for base types and core r and tidyverse features. (2020). at <https://CRAN.R-project.org/package=rlang>
6.
Wickham, H. Testthat: Get started with testing. The R Journal 3, 5–10 (2011).
7.
Wickham, H., Hester, J. & Chang, W. Devtools: Tools to make developing r packages easier. (2020). at <https://CRAN.R-project.org/package=devtools>
8.
Xie, Y., Allaire, J. J. & Grolemund, G. R markdown: The definitive guide. (Chapman; Hall/CRC, 2018). at <https://bookdown.org/yihui/rmarkdown>
9.
Allaire, J., Xie, Y., McPherson, J., Luraschi, J., Ushey, K., Atkins, A., Wickham, H., Cheng, J., Chang, W. & Iannone, R. Rmarkdown: Dynamic documents for r. (2020). at <https://github.com/rstudio/rmarkdown>
10.
Xie, Y., Dervieux, C. & Riederer, E. R markdown cookbook. (Chapman; Hall/CRC, 2020). at <https://bookdown.org/yihui/rmarkdown-cookbook>
11.
Gross, J. L., Yellen, J. & Zhang, P. Handbook of graph theory. (Chapman; Hall/CRC., 2013). at <https://doi.org/10.1201/b16132>
12.
Wikipedia. Glossary of graph theory. Wikipedia (2021). at <https://en.wikipedia.org/wiki/Glossary_of_graph_theory>
13.
Kahn, A. B. Topological sorting of large networks. Communications of the ACM 5, 558–562 (1962).
14.
Kamiński, B., Jakubczyk, M. & Szufel, P. A framework for sensitivity analysis of decision trees. Central European Journal of Operational Research 26, 135–159 (2018).
15.
Walker, J. Q. A node-positioning algorithm for general trees. (University of North Carolina, 1989). at <http://www.cs.unc.edu/techreports/89-034.pdf>
16.
Gansner, E. R., Koutsofios, E., North, S. C. & Vo, K.-P. A technique for drawing directed graphs. IEEE Transactions on Software Engineering 19, 214–230 (1993).
17.
Briggs, A. H., Weinstein, M. C., Fenwick, E. A. L., Karnon, J., Sculpher, M. J. & Paltiel, A. D. Model parameter estimation and uncertainty: A report of the ISPOR-SMDM modeling good research practices task force-6. Value in Health 15, 835–842 (2012).
18.
Siebert, U., Alagoz, O., Bayoumi, A. M., Jahn, B., Owens, D. K., Cohen, D. J. & Kuntz, K. M. State-transition modeling: A report of the ISPOR-SMDM modeling good research practices task force-3. Value in Health 15, 812–820 (2012).

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.