The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
Real-time polymerase chain reaction (real-time PCR) is widely used in biological studies. Various analysis methods are employed on the real-time PCR data to measure the mRNA levels under different experimental conditions. ‘rtpcr’ package was developed for amplification efficiency calculation, statistical analysis and bar plot representation of real-time PCR data in R. By accounting for up to two reference genes and amplification efficiency values, a general calculation methodology described by Ganger et al. (2017) and Taylor et al. (2019), matching both Livak and Schmittgen (2001) and Pfaffl et al. (2002) methods was used. Based on the experimental conditions, the functions of the ‘rtpcr’ package use t-test (for experiments with a two-level factor), analysis of variance, analysis of covariance (ANCOVA) or analysis of repeated measure data to calculate the fold change (FC, \({\Delta\Delta C_t}\) method) or relative expression (RE, \({\Delta C_t}\) method). The functions further provide standard errors and confidence interval for means, apply statistical mean comparisons and present significance. To facilitate function application, different data sets were used as examples and the outputs were explained. An outstanding feature of ‘rtpcr’ package is providing publication-ready bar plots with various controlling arguments for experiments with up to three different factors which are further editable by ggplot2 functions.
The basic method for expression estimation of a gene between conditions relies on the calculation of fold differences by applying the PCR amplification efficiency (E) and the threshold cycle (syn. crossing point or Ct). Among the various approaches developed for data analysis in real-time PCR, the Livak approach, also known as the \(2^{-\Delta\Delta C_t}\) method, stands out for its simplicity and widespread use where the fold change (FC) exoression \((2^{-\Delta\Delta C_t})\) in Treatment (Tr) compared to Control (Co) condition is calculated according to equation:
$$\begin{align*} \text{Fold change} & = 2^{-\Delta\Delta C_t} \\ & = \frac{2^{-(C_{t_{\text{target}}}-C_{t_{\text{ref}}})_{Tr}}} {2^{-(C_{t_{\text{target}}}-C_{t_{\text{ref}}})_{Co}}} \\ & =2^{-[(C_{t_{\text{target}}}-C_{t_{\text{ref}}})_{\text{Tr}}- {(C_{t_{\text{target}}}-C_{t_{\text{ref}}})}_{\text{Co}}]} \\ & = 2^{-[{(\Delta C_t)_{Tr} - (\Delta C_t)_{Co}}]} \end{align*}$$
Here, \(\Delta C_t\) is the difference between target Ct and reference Ct values for a given sample. Livak method assumes that both the target and reference genes are amplified with efficiencies close to 100%, allowing for the relative quantification of gene expression levels.
On the other hand, the Pfaffl method offers a more flexible approach by accounting for differences in amplification efficiencies between the target and reference genes. This method adjusts the calculated expression ratio by incorporating the specific amplification efficiencies, thus providing a more accurate representation of the relative gene expression levels.
$$\text{Fold change} = \frac{E^{-(C_{t_{\text{Tr}}}-C_{t_{\text{Co}}})_{target}}} {E^{-(C_{t_{\text{Tr}}}-C_{t_{\text{Co}}})_{ref}}}$$
The rtpcr
package was developed for the R environment in the major operating systems. The package functions are mainly based on the calculation of efficiency-weighted \(\Delta C_t\) \((w\Delta C_t)\) values from target and reference gene Ct (equation 3). \(w\Delta C_t\) values are weighted for the amplification efficiencies as described by Ganger et al. (2017) except that log2 is used instead of log10:
$$w\Delta Ct =\log_{2}(E_{target}).Ct_{target}-\log_{2}(E_{ref}).Ct_{ref}$$
The relative expression of the target gene normalized to that of reference gene(s) within the same sample or condition is called relative expression (RE). From the mean \(w\Delta C_t\) values over biological replicates, RE of a target gene can be calculated for each condition according to the equation
$$\text{Relative Expression} = 2^{-\overline{w\Delta Ct}}$$ Relative expression is only calibrated for the reference gene(s) and not for a control condition. However, often one condition is considered as calibrator and the fold change (FC) expression in other conditions is calculated relative to the calibrator. Examples are Treatment versus Control where Control is served as the calibrator, or time 0 versus time 1 (e.g. after 1 hour) and time 2 (e.g. after 2 hours) where time 0 is served as the reference or calibrator level. So, calibrator is the reference level or sample that all others are compared to. The fold change (FC) expression of a target gene for the reference or calibrator level is 1 because it is not changed compared to itself. The fold change expression of a target gene due to the treatment can be calculated as follows:
$$\text{Fold Change due to Treatment}=2^{-(\overline{w\Delta Ct}_{\text{Tr}}-{\overline{w\Delta Ct}_{\text{Co}}})}$$
qpcrTTEST
and qpcrTTESTplot
functions calculate FC for multi-genes-two conditional cases, qpcrANOVAFC
represents FC for single-gene-factorial (single- or multi-factor) experiments, and qpcrREPEATED
calculates FC for the repeated measure data. If \(w \Delta C_t\) values is calculated from the E values, the calculations match the formula of Pfaffl while if 2 (complete efficiency) be used instead, the result match the \(2^{-\Delta\Delta C_t}\) method. In any case we called these as Fold Change in the outputs of rtpcr
. Under factorial experiments where the calculation of the expression of the target gene relative to the reference gene (called Relative Expression) in each condition is desired, qpcrANOVARE
, oneFACTORplot
, twoFACTORplot
and threeFACTORplot
functions were developed for ANOVA analysis, and representing the plots from single, double or triple factor experiments, respectively. The last three functions generate ggplot2
-derived graphs based on the output of the qpcrANOVARE
function. If available, the blocking factor can also be handled by qpcrANOVARE
, qpcrANOVAFC
and qpcrREPEATED
functions. Standard error of the FC and RE means is calculated according to Taylor et al. (2019) in rtpcr
package.
Here, a brief methodology is presented but details about the \(w\Delta C_t\) calculations and statistical analysis are available in Ganger et al. (2017). Importantly, because both the RE or FC gene expression values follow a lognormal distribution, a normal distribution is expected for the \(w \Delta C_t\) values making it possible to apply t-test or analysis of variance to them. Following analysis, \(w\Delta C_t\) values are statistically compared and standard deviations and confidence interval are calculated, but the transformation \(y = 2^{-x}\) is applied in the final step in order to report the results.
The rtpcr
package can be installed and loaded using:
install.packages("rtpcr")
library(rtpcr)
Alternatively, the rtpcr
with the latest changes can be installed by running the following code in your R software:
# install `rtpcr` from github (under development)
devtools::install_github("mirzaghaderi/rtpcr")
# I strongly recommend to install the package with the vignette as it contains information about how to use the 'rtpcr' package. Through the following code, Vignette is installed as well.
devtools::install_github("mirzaghaderi/rtpcr", build_vignettes = TRUE)
To use the functions, input data should be prepared in the right format with appropriate column arrangement. The correct column arrangement is shown in Table 1 and Table 2. For qpcrANOVAFC
or qpcrANOVARE
analysis, ensure that each line in the data set belongs to a separate individual or biological replicate reflecting a non-repeated measure experiment.
Table 1. Data structure and column arrangement required for ‘rtpcr’ package. rep: technical replicate; targetE and refE: amplification efficiency columns for target and reference genes, respectively. targetCt and refCt: target gene and reference gene Ct columns, respectively. factors (up to three factors is allowed): experimental factors.
Experiment type | Column arrangement of the input data | Example in the package |
---|---|---|
Amplification efficiency | Dilutions - geneCt … | data_efficiency |
t-test (accepts multiple genes) | condition (put the control level first) - gene (put reference gene(s) last.)- efficiency - Ct | data_ttest |
Factorial (Up to three factors) | factor1 - rep - targetE - targetCt - refE - refCt | data_1factor |
factor1 - factor2 - rep - targetE - targetCt - refE - refCt | data_2factor | |
factor1 - factor2 - factor3 - rep - targetE - targetCt - refE - refCt | data_3factor | |
Factorial with blocking | factor1 - block - rep - targetE - targetCt - refE - refCt | |
factor1 - factor2 - block - rep - targetE - targetCt - refE - refCt | data_2factorBlock | |
factor1 - factor2 - factor3 - block - rep - targetE - targetCt - refE - refCt | ||
Two reference genes | . . . . . . rep - targetE - targetCt - ref1E - ref1Ct - ref2E - ref2Ct | |
calculating biological replicated | . . . . . . biologicalRep - techcicalRep - Etarget - targetCt - Eref - refCt | data_withTechRep |
. . . . . . biologicalRep - techcicalRep - Etarget - targetCt - ref1E - ref1Ct - ref2E - ref2Ct |
NOTE: For qpcrANOVAFC
or qpcrANOVARE
analysis, each line in the input data set belongs to a separate individual or biological replicate reflecting a non-repeated measure experiment.
Table 2. Repeated measure data structure and column arrangement required for the qpcrREPEATED
function. targetE and refE: amplification efficiency columns for target and reference genes, respectively. targetCt and refCt: Ct columns for target and reference genes, respectively. In the “id” column, a unique number is assigned to each individual, e.g. all the three number 1 indicate a single individual.
Experiment type | Column arrangement of the input data | Example in the package |
---|---|---|
Repeated measure | id - time - targetE - targetCt - ref1E - ref1Ct | data_repeated_measure_1 |
id - time - targetE - targetCt - ref1E - ref1Ct - ref2E - ref2Ct | ||
Repeated measure | id - treatment - time - targetE - targetCt - ref1E - ref1Ct | data_repeated_measure_2 |
id - treatment - time - targetE - targetCt - ref1E - ref1Ct - ref2E - ref2Ct |
To see list of data in the rtpcr
package run data(package = "rtpcr")
.
Example data sets can be presented by running the name of each data set. A description of the columns names in each data set is called by “?” followed by the names of the data set, for example ?data_1factor
To simplify rtpcr
usage, examples for using the functions are presented below.
Table 3. Functions and examples for using them.
function | Analysis | Example (see package help for more arguments) |
---|---|---|
efficiency | Efficiency, standard curves and related statistics | efficiency(data_efficiency) |
meanTech | Calculating the mean of technical replicates | meanTech(data_withTechRep, groups = 1:4) |
qpcrANOVAFC | FC and bar plot of the target gene (one or multi-factorial experiments) | qpcrANOVAFC(data_1factor, numberOfrefGenes = 1, mainFactor.column = 1, mainFactor.level.order = c(“L1”, “L2”, “L3”) |
oneFACTORplot | Bar plot of the relative gene expression from a one-factor experiment | out <- qpcrANOVARE(data_1factor, numberOfrefGenes = 1)$Result; oneFACTORplot(out, errorbar = “se”) |
qpcrANOVARE | Analysis of Variance of the qpcr data | qpcrANOVARE(data_3factor, numberOfrefGenes = 1) |
qpcrTTEST | Computing the fold change and related statistics | qpcrTTEST(data_ttest, numberOfrefGenes = 1, paired = FALSE, var.equal = TRUE) |
qpcrTTESTplot | Bar plot of the average fold change of the target genes | qpcrTTESTplot(data_ttest, numberOfrefGenes = 1, order = c(“C2H2-01”, “C2H2-12”, “C2H2-26”)) |
threeFACTORplot | Bar plot of the relative gene expression from a three-factor experiment | res <- qpcrANOVARE(data_3factor, numberOfrefGenes = 1)$Result; threeFACTORplot(res, |
arrangement = c(3, 1, 2), errorbar = “se”) | ||
twoFACTORplot | Bar plot of the relative gene expression from a two-factor experiment | res <- qpcrANOVARE(data_2factor, numberOfrefGenes = 1)$Result; twoFACTORplot(res, x.axis.factor = Genotype, group.factor = Drought, errorbar = “se”) |
qpcrREPEATED | Bar plot of the fold change expression for repeated measure observations (taken over time from each individual) | qpcrREPEATED(data_repeated_measure_2, numberOfrefGenes = 1), factor = “time” |
see package help for more arguments including the number of reference genes, levels arrangement, blocking, and arguments for adjusting the bar plots.
To calculate the amplification efficiencies of a target and a reference gene, a data frame should be prepared with 3 columns of dilutions, target gene Ct values, and reference gene Ct values, respectively, as shown below.
data_efficiency
## dilutions C2H2.26 C2H2.01 GAPDH
## 1 1.00 25.57823 24.25 22.60794
## 2 1.00 25.53636 24.13 22.68348
## 3 1.00 25.50280 24.04 22.62602
## 4 0.50 26.70615 25.56 23.67162
## 5 0.50 26.72720 25.43 23.64855
## 6 0.50 26.86921 26.01 23.70494
## 7 0.20 28.16874 27.37 25.11064
## 8 0.20 28.06759 26.94 25.11985
## 9 0.20 28.10531 27.14 25.10976
## 10 0.10 29.19743 28.05 26.16919
## 11 0.10 29.49406 28.89 26.15119
## 12 0.10 29.07117 28.32 26.15019
## 13 0.05 30.16878 29.50 27.11533
## 14 0.05 30.14193 29.93 27.13934
## 15 0.05 30.11671 29.71 27.16338
## 16 0.02 31.34969 30.69 28.52016
## 17 0.02 31.35254 30.54 28.57228
## 18 0.02 31.34804 30.04 28.53100
## 19 0.01 32.55013 31.12 29.49048
## 20 0.01 32.45329 31.29 29.48433
## 21 0.01 32.27515 31.15 29.26234
Amplification efficiency in PCR can be either defined as percentage (from 0 to 1) or as time of PCR product increase per cycle (from 1 to 2). in the rtpcr
package, the amplification efficiency (E) has been referred to times of PCR product increase (1 to 2). A complete efficiency is equal to 2. If dilutions and Ct values are available for a number of genes, the efficiency
function calculates the amplification efficiency of genes and presents the related standard curves along with the Slope, Efficiency, and R2 statistics. The function also does pairwise comparisons of the slopes for the genes. For this, a regression line is fitted forst using the \(\Delta C_t\) values of each pair of genes.
efficiency(data_efficiency)
## $Efficiency
## Gene Slope R2 E
## 1 C2H2.26 -3.388094 0.9965504 1.973110
## 2 C2H2.01 -3.528125 0.9713914 1.920599
## 3 GAPDH -3.414551 0.9990278 1.962747
##
## $Slope_compare
## $emtrends
## variable log10(dilutions).trend SE df lower.CL upper.CL
## C2H2.26 -3.39 0.0856 57 -3.56 -3.22
## C2H2.01 -3.53 0.0856 57 -3.70 -3.36
## GAPDH -3.41 0.0856 57 -3.59 -3.24
##
## Confidence level used: 0.95
##
## $contrasts
## contrast estimate SE df t.ratio p.value
## C2H2.26 - C2H2.01 0.1400 0.121 57 1.157 0.4837
## C2H2.26 - GAPDH 0.0265 0.121 57 0.219 0.9740
## C2H2.01 - GAPDH -0.1136 0.121 57 -0.938 0.6186
##
## P value adjustment: tukey method for comparing a family of 3 estimates
##
##
## $plot
Note: It is advised that the amplification efficiency be calculated for each cDNA sample because the amplification efficiency not only depends on the PCR mic and primer characteristics, but also varies among different cDNA samples.
When a target gene is assessed under two different conditions (for example Control and treatment), it is possible to calculate the average fold change expression \(({\Delta \Delta C_t}\) method) of the target gene in treatment relative to control conditions. For this, the data should be prepared according to the following data set consisting of 4 columns belonging to condition levels, E (efficiency), genes and Ct values, respectively. Each Ct value is the mean of technical replicates. Complete amplification efficiencies of 2 have been assumed here for all wells but the calculated efficiencies can be used instead.
data_ttest
## Condition Gene E Ct
## 1 control C2H2-26 2 31.26
## 2 control C2H2-26 2 31.01
## 3 control C2H2-26 2 30.97
## 4 treatment C2H2-26 2 32.65
## 5 treatment C2H2-26 2 32.03
## 6 treatment C2H2-26 2 32.40
## 7 control C2H2-01 2 31.06
## 8 control C2H2-01 2 30.41
## 9 control C2H2-01 2 30.97
## 10 treatment C2H2-01 2 28.85
## 11 treatment C2H2-01 2 28.93
## 12 treatment C2H2-01 2 28.90
## 13 control C2H2-12 2 28.50
## 14 control C2H2-12 2 28.40
## 15 control C2H2-12 2 28.80
## 16 treatment C2H2-12 2 27.90
## 17 treatment C2H2-12 2 28.00
## 18 treatment C2H2-12 2 27.90
## 19 control ref 2 28.87
## 20 control ref 2 28.42
## 21 control ref 2 28.53
## 22 treatment ref 2 28.31
## 23 treatment ref 2 29.14
## 24 treatment ref 2 28.63
Here, the above data set was used for the Fold Change expression analysis of the target genes using the qpcrTTEST
function. This function performs a t-test-based analysis of any number of genes that have been evaluated under control and treatment conditions. The output is a table of target gene names, fold changes confidence limits, and the t.test derived p-values. The qpcrTTEST
function includes the var.equal
argument. When set to FALSE
, t.test
is performed under the unequal variances hypothesis. Furthermore, the samples in qPCR may be unpaired or paired so the analysis can be done for unpaired or paired conditions. Paired samples refer to a situation where the measurements are made on the same set of subjects or individuals. This could occur if the data is acquired from the same set of individuals before and after a treatment. In such cases, the paired t-test is used for statistical comparisons by setting the t-test paired
argument to TRUE
.
qpcrTTEST(data_ttest,
numberOfrefGenes = 1,
paired = F,
var.equal = T)
## $Raw_data
## group Gene wDCt
## 1 control C2H2-26 2.39
## 2 control C2H2-26 2.59
## 3 control C2H2-26 2.44
## 4 treatment C2H2-26 4.34
## 5 treatment C2H2-26 2.89
## 6 treatment C2H2-26 3.77
## 7 control C2H2-01 2.19
## 8 control C2H2-01 1.99
## 9 control C2H2-01 2.44
## 10 treatment C2H2-01 0.54
## 11 treatment C2H2-01 -0.21
## 12 treatment C2H2-01 0.27
## 13 control C2H2-12 -0.37
## 14 control C2H2-12 -0.02
## 15 control C2H2-12 0.27
## 16 treatment C2H2-12 -0.41
## 17 treatment C2H2-12 -1.14
## 18 treatment C2H2-12 -0.73
##
## $Result
## Gene FC LCL UCL pvalue se Lower.se Upper.se
## 1 C2H2-26 0.4373 0.1926 0.9927 0.0488 0.4218 0.3264 0.5858
## 2 C2H2-01 4.0185 2.4598 6.5649 0.0014 0.2193 3.4518 4.6782
## 3 C2H2-12 1.6472 0.9595 2.8279 0.0624 0.2113 1.4228 1.9070
The qpcrTTESTplot
function generates a bar plot of fold changes (FC) and confidence intervals for the target genes. the qpcrTTESTplot
function accepts any number of genes and any replicates. The qpcrTTESTplot
function automatically puts appropriate signs of **, * on top of the plot columns based on the output p-values.
# Producing the plot
t1 <- qpcrTTESTplot(data_ttest,
numberOfrefGenes = 1,
fontsizePvalue = 4,
errorbar = "ci")
# Producing the plot: specifying gene order
t2 <- qpcrTTESTplot(data_ttest,
numberOfrefGenes = 1,
order = c("C2H2-01", "C2H2-12", "C2H2-26"),
paired = FALSE,
var.equal = TRUE,
width = 0.5,
fill = "palegreen",
y.axis.adjust = 3,
y.axis.by = 2,
ylab = "Average Fold Change",
xlab = "none",
fontsizePvalue = 4)
multiplot(t1, t2, cols = 2)
## $plot
##
## $plot
grid.text("A", x = 0.02, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
grid.text("B", x = 0.52, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
In the rtpcr package, the fold change analysis of a target gene is applied based on analysis of variance; ANOVA (or analysis of covariance; ANCOVA) using the qpcrANOVAFC
function. the default argument is anova
but can be changes to ancova
as well. the ancova analysis is suitable when the levels of a factor are also affected by an uncontrolled quantitative covariate. For example, suppose that wDCt of a target gene in a plant is affected by temperature. The gene may also be affected by drought. since we already know that temperature affects the target gene, we are interesting now if the gene expression is also altered by the drought levels. We can design an experiment to understand the gene behavior at both temperature and drought levels at the same time. The drought is another factor (the covariate) that may affect the expression of our gene under the levels of the first factor i.e. temperature. The data of such an experiment can be analyzed by both ANCOVA or factorial ANOVA using qpcrANOVAFC
function. The function also works for one factor experiment as well. Bar plot of fold changes (FC values) along with the 95% confidence interval is also returned by the qpcrANOVAFC
function. There is also a function called oneFACTORplot
which returns FC values and related plot for a one-factor-experiment with more than two levels.
# See sample data
data_2factor
## Genotype Drought Rep EPO POCt EGAPDH GAPDHCt
## 1 R D0 1 2 33.30 2 31.53
## 2 R D0 2 2 33.39 2 31.57
## 3 R D0 3 2 33.34 2 31.50
## 4 R D1 1 2 32.73 2 31.30
## 5 R D1 2 2 32.46 2 32.55
## 6 R D1 3 2 32.60 2 31.92
## 7 R D2 1 2 33.48 2 33.30
## 8 R D2 2 2 33.27 2 33.37
## 9 R D2 3 2 33.32 2 33.35
## 10 S D0 1 2 26.85 2 26.94
## 11 S D0 2 2 28.17 2 27.69
## 12 S D0 3 2 27.99 2 27.39
## 13 S D1 1 2 30.41 2 28.70
## 14 S D1 2 2 29.49 2 28.66
## 15 S D1 3 2 29.98 2 28.71
## 16 S D2 1 2 29.03 2 30.61
## 17 S D2 2 2 28.73 2 30.20
## 18 S D2 3 2 28.83 2 30.49
qpcrANOVAFC(data_2factor,
numberOfrefGenes = 1,
block = NULL,
analysisType = "ancova",
mainFactor.column = 2,
fontsizePvalue = 4,
x.axis.labels.rename = "none")
## Warning in qpcrANOVAFC(data_2factor, numberOfrefGenes = 1, block = NULL, : The
## D0 level was used as calibrator.
## ANOVA table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## Drought 12.9530 6.4765 2 9.9998 41.691 1.408e-05 ***
## Genotype 3.0505 3.0505 1 9.9998 19.637 0.001272 **
## Drought:Genotype 4.5454 2.2727 2 9.9998 14.630 0.001072 **
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## ANCOVA table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## Genotype 3.0505 3.0505 1 14 6.649 0.0218703 *
## Drought 12.9530 6.4765 2 14 14.117 0.0004398 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 D0 1.0000 1.0000 0.0000 0.0000 0.3445 0.7876 1.2697
## 2 D1 vs D0 1.0705 0.8051 0.5266 2.1763 0.2631 0.8920 1.2847
## 3 D2 vs D0 3.5967 0.0003 *** 1.7693 7.3116 0.3576 2.8071 4.6084
##
## Fold Change plot of the main factor levels
the qpcrANOVARE
function performs Relative Expression (RE) analysis for uni- or multi-factorial experiments in which all factor level combinations are used as treatments. The input data set should be prepared as shown in table 1. Factor columns should be presented first followed by blocking factor (if available), biological replicates and efficiency and Ct values of target and reference gene(s). The example data set below (data_3factor
) represents amplification efficiency and Ct values for target and reference genes under three grouping factors (two different cultivars, three drought levels, and the presence or absence of bacteria). Here, the efficiency value of 2 has been used for all wells, but the calculated efficiencies can be used instead.
# See a sample dataset
data_3factor
## Type Conc SA Replicate EPO POCt EGAPDH GAPDHCt
## 1 R L A1 1 2 33.30 2 31.53
## 2 R L A1 2 2 33.39 2 31.57
## 3 R L A1 3 2 33.34 2 31.50
## 4 R L A2 1 2 34.01 2 31.48
## 5 R L A2 2 2 36.82 2 31.44
## 6 R L A2 3 2 35.44 2 31.46
## 7 R M A1 1 2 32.73 2 31.30
## 8 R M A1 2 2 32.46 2 32.55
## 9 R M A1 3 2 32.60 2 31.92
## 10 R M A2 1 2 33.37 2 31.19
## 11 R M A2 2 2 33.12 2 31.94
## 12 R M A2 3 2 33.21 2 31.57
## 13 R H A1 1 2 33.48 2 33.30
## 14 R H A1 2 2 33.27 2 33.37
## 15 R H A1 3 2 33.32 2 33.35
## 16 R H A2 1 2 32.53 2 33.47
## 17 R H A2 2 2 32.61 2 33.26
## 18 R H A2 3 2 32.56 2 33.36
## 19 S L A1 1 2 26.85 2 26.94
## 20 S L A1 2 2 28.17 2 27.69
## 21 S L A1 3 2 27.99 2 27.39
## 22 S L A2 1 2 28.71 2 29.45
## 23 S L A2 2 2 29.01 2 29.46
## 24 S L A2 3 2 28.82 2 29.48
## 25 S M A1 1 2 30.41 2 28.70
## 26 S M A1 2 2 29.49 2 28.66
## 27 S M A1 3 2 29.98 2 28.71
## 28 S M A2 1 2 28.91 2 28.09
## 29 S M A2 2 2 28.60 2 28.65
## 30 S M A2 3 2 28.59 2 28.37
## 31 S H A1 1 2 29.03 2 30.61
## 32 S H A1 2 2 28.73 2 30.20
## 33 S H A1 3 2 28.83 2 30.49
## 34 S H A2 1 2 28.29 2 30.84
## 35 S H A2 2 2 28.53 2 30.65
## 36 S H A2 3 2 28.28 2 30.74
The qpcrANOVARE
function produces the main analysis output including mean wDCt, LCL, UCL, grouping letters, and standard deviations for relative expression values. The standard deviation for each treatment is derived from the biological replicates of back-transformed wDCt data.
# If the data include technical replicates, means of technical replicates
# should be calculated first using meanTech function.
# Applying ANOVA analysis
res <- qpcrANOVARE(data_2factor,
numberOfrefGenes = 1,
block = NULL)
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 5 20.5489 4.1098 26.267 4.515e-06 ***
## Residuals 12 1.8775 0.1565
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## Genotype Drought RE LCL UCL se Lower.se Upper.se letters
## 1 S D2 2.9690 2.1030 4.1918 0.0551 2.8577 3.0846 a
## 2 R D2 0.9885 0.7002 1.3956 0.0841 0.9325 1.0478 b
## 3 S D0 0.7955 0.5635 1.1232 0.2128 0.6864 0.9219 b
## 4 R D1 0.6271 0.4441 0.8853 0.4388 0.4626 0.8500 bc
## 5 S D1 0.4147 0.2937 0.5854 0.2540 0.3478 0.4945 cd
## 6 R D0 0.2852 0.2020 0.4026 0.0208 0.2811 0.2893 d
res$Result
## Genotype Drought RE LCL UCL se Lower.se Upper.se letters
## 1 S D2 2.9690 2.1030 4.1918 0.0551 2.8577 3.0846 a
## 2 R D2 0.9885 0.7002 1.3956 0.0841 0.9325 1.0478 b
## 3 S D0 0.7955 0.5635 1.1232 0.2128 0.6864 0.9219 b
## 4 R D1 0.6271 0.4441 0.8853 0.4388 0.4626 0.8500 bc
## 5 S D1 0.4147 0.2937 0.5854 0.2540 0.3478 0.4945 cd
## 6 R D0 0.2852 0.2020 0.4026 0.0208 0.2811 0.2893 d
res$Post_hoc_Test
## NULL
# Before plotting, the result needs to be extracted as below:
out2 <- qpcrANOVARE(data_1factor, numberOfrefGenes = 1, block = NULL)$Result
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 2 4.9393 2.46963 12.345 0.007473 **
## Residuals 6 1.2003 0.20006
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## SA RE LCL UCL se Lower.se Upper.se letters
## 1 L3 0.9885 0.6379 1.5318 0.0841 0.9325 1.0478 a
## 2 L2 0.6271 0.4047 0.9717 0.4388 0.4626 0.8500 a
## 3 L1 0.2852 0.1840 0.4419 0.0208 0.2811 0.2893 b
f1 <- oneFACTORplot(out2,
width = 0.2,
fill = "skyblue",
y.axis.adjust = 0.5,
y.axis.by = 1,
errorbar = "ci",
show.letters = TRUE,
letter.position.adjust = 0.1,
ylab = "Relative Expression",
xlab = "Factor Levels",
fontsize = 12,
fontsizePvalue = 4)
addline_format <- function(x,...){
gsub('\\s','\n',x)
}
f2 <- qpcrANOVAFC(data_1factor,
numberOfrefGenes = 1,
mainFactor.column = 1,
block = NULL,
mainFactor.level.order = c("L1","L2","L3"),
width = 0.5,
fill = c("skyblue","#79CDCD"),
y.axis.by = 1,
letter.position.adjust = 0,
y.axis.adjust = 1,
ylab = "Fold Change",
fontsize = 12, plot = F,
x.axis.labels.rename = addline_format(c("Control",
"Treatment_1 vs Control",
"Treatment_2 vs Control")))
## ANOVA table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## SA 4.9393 2.4696 2 4 14.319 0.01502 *
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## ANCOVA table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## SA 4.9393 2.4696 2 4 14.319 0.01502 *
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se
## 1 Control 1.0000 1.0000 0.0000 0.0000 0.0208 0.9857
## 2 Treatment_1\nvs\nControl 2.1987 0.0285 * 0.9514 5.0812 0.4388 1.6221
## 3 Treatment_2\nvs\nControl 3.4661 0.0061 ** 1.4999 8.0101 0.0841 3.2698
## Upper.se
## 1 1.0145
## 2 2.9803
## 3 3.6742
multiplot(f1, f2$FC_Plot_of_the_main_factor_levels, cols = 2)
grid.text("A", x = 0.02, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
grid.text("B", x = 0.52, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
# Before plotting, the result needs to be extracted as below:
res <- qpcrANOVARE(data_2factor, numberOfrefGenes = 1, block = NULL)$Result
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 5 20.5489 4.1098 26.267 4.515e-06 ***
## Residuals 12 1.8775 0.1565
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## Genotype Drought RE LCL UCL se Lower.se Upper.se letters
## 1 S D2 2.9690 2.1030 4.1918 0.0551 2.8577 3.0846 a
## 2 R D2 0.9885 0.7002 1.3956 0.0841 0.9325 1.0478 b
## 3 S D0 0.7955 0.5635 1.1232 0.2128 0.6864 0.9219 b
## 4 R D1 0.6271 0.4441 0.8853 0.4388 0.4626 0.8500 bc
## 5 S D1 0.4147 0.2937 0.5854 0.2540 0.3478 0.4945 cd
## 6 R D0 0.2852 0.2020 0.4026 0.0208 0.2811 0.2893 d
Final_data <- qpcrANOVARE(data_2factor, numberOfrefGenes = 1, block = NULL)$Final_data
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 5 20.5489 4.1098 26.267 4.515e-06 ***
## Residuals 12 1.8775 0.1565
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## Genotype Drought RE LCL UCL se Lower.se Upper.se letters
## 1 S D2 2.9690 2.1030 4.1918 0.0551 2.8577 3.0846 a
## 2 R D2 0.9885 0.7002 1.3956 0.0841 0.9325 1.0478 b
## 3 S D0 0.7955 0.5635 1.1232 0.2128 0.6864 0.9219 b
## 4 R D1 0.6271 0.4441 0.8853 0.4388 0.4626 0.8500 bc
## 5 S D1 0.4147 0.2937 0.5854 0.2540 0.3478 0.4945 cd
## 6 R D0 0.2852 0.2020 0.4026 0.0208 0.2811 0.2893 d
# Plot of the 'res' data with 'Genotype' as grouping factor
q1 <- twoFACTORplot(res,
x.axis.factor = Drought,
group.factor = Genotype,
errorbar = "se",
width = 0.5,
fill = "Greens",
y.axis.adjust = 0.5,
y.axis.by = 2,
ylab = "Relative Expression",
xlab = "Drought Levels",
legend.position = c(0.15, 0.8),
show.letters = TRUE,
fontsizePvalue = 4)
# Plotting the same data with 'Drought' as grouping factor
q2 <- twoFACTORplot(res,
x.axis.factor = Genotype,
group.factor = Drought,
errorbar = "se",
xlab = "Genotype",
fill = "Blues",
legend.position = c(0.15, 0.8),
show.letters = FALSE,
show.errorbars = T,
fontsizePvalue = 4)
multiplot(q1, q2, cols = 2)
grid.text("A", x = 0.02, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
grid.text("B", x = 0.52, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
# Before plotting, the result needs to be extracted as below:
res <- qpcrANOVARE(data_3factor, numberOfrefGenes = 1, block = NULL)$Result
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 11 94.001 8.5456 29.188 3.248e-11 ***
## Residuals 24 7.027 0.2928
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## Type Conc SA RE LCL UCL se Lower.se Upper.se letters
## 1 S H A2 5.1934 3.3217 8.1197 0.1309 4.7429 5.6867 a
## 2 S H A1 2.9690 1.8990 4.6420 0.0551 2.8577 3.0846 ab
## 3 R H A2 1.7371 1.1110 2.7159 0.0837 1.6392 1.8409 bc
## 4 S L A2 1.5333 0.9807 2.3973 0.0865 1.4441 1.6280 c
## 5 R H A1 0.9885 0.6323 1.5455 0.0841 0.9325 1.0478 cd
## 6 S L A1 0.7955 0.5088 1.2438 0.2128 0.6864 0.9219 d
## 7 S M A2 0.7955 0.5088 1.2438 0.2571 0.6656 0.9507 d
## 8 R M A1 0.6271 0.4011 0.9804 0.4388 0.4626 0.8500 de
## 9 S M A1 0.4147 0.2652 0.6483 0.2540 0.3478 0.4945 ef
## 10 R M A2 0.3150 0.2015 0.4925 0.2890 0.2578 0.3849 f
## 11 R L A1 0.2852 0.1824 0.4459 0.0208 0.2811 0.2893 f
## 12 R L A2 0.0641 0.0410 0.1002 0.8228 0.0362 0.1134 g
res
## Type Conc SA RE LCL UCL se Lower.se Upper.se letters
## 1 S H A2 5.1934 3.3217 8.1197 0.1309 4.7429 5.6867 a
## 2 S H A1 2.9690 1.8990 4.6420 0.0551 2.8577 3.0846 ab
## 3 R H A2 1.7371 1.1110 2.7159 0.0837 1.6392 1.8409 bc
## 4 S L A2 1.5333 0.9807 2.3973 0.0865 1.4441 1.6280 c
## 5 R H A1 0.9885 0.6323 1.5455 0.0841 0.9325 1.0478 cd
## 6 S L A1 0.7955 0.5088 1.2438 0.2128 0.6864 0.9219 d
## 7 S M A2 0.7955 0.5088 1.2438 0.2571 0.6656 0.9507 d
## 8 R M A1 0.6271 0.4011 0.9804 0.4388 0.4626 0.8500 de
## 9 S M A1 0.4147 0.2652 0.6483 0.2540 0.3478 0.4945 ef
## 10 R M A2 0.3150 0.2015 0.4925 0.2890 0.2578 0.3849 f
## 11 R L A1 0.2852 0.1824 0.4459 0.0208 0.2811 0.2893 f
## 12 R L A2 0.0641 0.0410 0.1002 0.8228 0.0362 0.1134 g
# releveling a factor levels first
res$Conc <- factor(res$Conc, levels = c("L","M","H"))
res$Type <- factor(res$Type, levels = c("S","R"))
# Arrange the first three colunms of the result table.
# This determines the columns order and shapes the plot output.
p1 <- threeFACTORplot(res,
arrangement = c(3, 1, 2),
errorbar = "se",
legend.position = c(0.2, 0.85),
xlab = "condition",
fontsizePvalue = 4)
# When using ci as error, increase y.axis.adjust to see the plot correctly!
p2 <- threeFACTORplot(res,
arrangement = c(2, 3, 1),
bar.width = 0.8,
fill = "Greens",
xlab = "Drought",
ylab = "Relative Expression",
errorbar = "ci",
y.axis.adjust = 2,
y.axis.by = 2,
letter.position.adjust = 0.6,
legend.title = "Genotype",
fontsize = 12,
legend.position = c(0.2, 0.8),
show.letters = TRUE,
fontsizePvalue = 4)
multiplot(p1, p2, cols = 2)
grid.text("A", x = 0.02, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
grid.text("B", x = 0.52, y = 1, just = c("right", "top"), gp=gpar(fontsize=16))
Fold change (FC) analysis of observations repeatedly taken over time qpcrREPEATED
function, for Repeated measure analysis of uni- or multi-factorial experiment data. The bar plot of the fold changes (FC) values along with the standard error (se) or confidence interval (ci) is also returned by the qpcrREPEATED
function.
a <- qpcrREPEATED(data_repeated_measure_1,
numberOfrefGenes = 1,
block = NULL,
fill = c("#778899", "#BCD2EE"),
factor = "time",
axis.text.x.angle = 45,
axis.text.x.hjust = 1,
plot = F)
## Warning in qpcrREPEATED(data_repeated_measure_1, numberOfrefGenes = 1, block =
## NULL, : The level 1 of the selected factor was used as calibrator.
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 11.073 5.5364 2 4 4.5382 0.09357 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 1.4051 0.3776 2.6484
## 2 time2 vs time1 0.8566 0.8166 0.0923 7.9492 0.9753 0.4357 1.6841
## 3 time3 vs time1 4.7022 0.0685 . 0.5067 43.6368 0.5541 3.2026 6.9040
b <- qpcrREPEATED(data_repeated_measure_2,
numberOfrefGenes = 1,
factor = "time",
block = NULL,
axis.text.x.angle = 45,
axis.text.x.hjust = 1,
plot = F)
## Warning in qpcrREPEATED(data_repeated_measure_2, numberOfrefGenes = 1, factor =
## "time", : The level 1 of the selected factor was used as calibrator.
## NOTE: Results may be misleading due to involvement in interactions
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 5.9166 2.95832 2 8 3.4888 0.08139 .
## treatment 0.6773 0.67728 1 4 0.7987 0.42199
## time:treatment 6.3186 3.15932 2 8 3.7258 0.07186 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 0.7036 0.6140 1.6286
## 2 time2 vs time1 1.2556 0.5540 0.4381 3.5987 0.5323 0.8682 1.8159
## 3 time3 vs time1 2.5432 0.0351 * 0.8873 7.2895 0.7074 1.5575 4.1527
multiplot(a, b, cols = 2)
## $Final_data
## id time Etarget Cttarget Eref Ctref wDCt
## 1 1 1 2 18.92 2 32.77 -13.85
## 2 1 2 2 19.46 2 33.03 -13.57
## 3 1 3 2 15.73 2 32.95 -17.22
## 4 2 1 2 15.82 2 32.45 -16.63
## 5 2 2 2 17.56 2 33.24 -15.68
## 6 2 3 2 17.21 2 33.64 -16.43
## 7 3 1 2 19.84 2 31.62 -11.78
## 8 3 2 2 19.74 2 32.08 -12.34
## 9 3 3 2 18.09 2 33.40 -15.31
##
## $lm
## Linear mixed model fit by REML ['lmerModLmerTest']
## Formula: formula
## Data: x
## REML criterion at convergence: 25.0824
## Random effects:
## Groups Name Std.Dev.
## id (Intercept) 1.419
## Residual 1.105
## Number of obs: 9, groups: id, 3
## Fixed Effects:
## (Intercept) time2 time3
## -14.0867 0.2233 -2.2333
##
## $ANOVA_table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 11.073 5.5364 2 4 4.5382 0.09357 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## $FC_statistics_of_the_main_factor
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 1.4051 0.3776 2.6484
## 2 time2 vs time1 0.8566 0.8166 0.0923 7.9492 0.9753 0.4357 1.6841
## 3 time3 vs time1 4.7022 0.0685 . 0.5067 43.6368 0.5541 3.2026 6.9040
##
## $FC_Plot
##
## attr(,"class")
## [1] "XX"
## $Final_data
## id treatment time Etarget Cttarget Eref Ctref wDCt
## 1 1 untreated 1 2 19.24 2 33.73 -14.49
## 2 1 untreated 2 2 19.95 2 34.20 -14.25
## 3 1 untreated 3 2 19.16 2 33.90 -14.74
## 4 2 untreated 1 2 20.11 2 32.56 -12.45
## 5 2 untreated 2 2 20.91 2 33.98 -13.07
## 6 2 untreated 3 2 20.91 2 33.16 -12.25
## 7 3 untreated 1 2 20.63 2 33.72 -13.09
## 8 3 untreated 2 2 19.16 2 34.51 -15.35
## 9 3 untreated 3 2 19.91 2 34.33 -14.42
## 10 4 treated 1 2 18.92 2 32.77 -13.85
## 11 4 treated 2 2 19.46 2 33.03 -13.57
## 12 4 treated 3 2 15.73 2 32.95 -17.22
## 13 5 treated 1 2 15.82 2 32.45 -16.63
## 14 5 treated 2 2 17.56 2 33.24 -15.68
## 15 5 treated 3 2 17.21 2 33.64 -16.43
## 16 6 treated 1 2 19.84 2 31.62 -11.78
## 17 6 treated 2 2 19.74 2 32.08 -12.34
## 18 6 treated 3 2 18.09 2 33.40 -15.31
##
## $lm
## Linear mixed model fit by REML ['lmerModLmerTest']
## Formula: formula
## Data: x
## REML criterion at convergence: 45.9708
## Random effects:
## Groups Name Std.Dev.
## id (Intercept) 1.2134
## Residual 0.9208
## Number of obs: 18, groups: id, 6
## Fixed Effects:
## (Intercept) time2 time3
## -13.3433 -0.8800 -0.4600
## treatmenttreated time2:treatmenttreated time3:treatmenttreated
## -0.7433 1.1033 -1.7733
##
## $ANOVA_table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 5.9166 2.95832 2 8 3.4888 0.08139 .
## treatment 0.6773 0.67728 1 4 0.7987 0.42199
## time:treatment 6.3186 3.15932 2 8 3.7258 0.07186 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## $FC_statistics_of_the_main_factor
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 0.7036 0.6140 1.6286
## 2 time2 vs time1 1.2556 0.5540 0.4381 3.5987 0.5323 0.8682 1.8159
## 3 time3 vs time1 2.5432 0.0351 * 0.8873 7.2895 0.7074 1.5575 4.1527
##
## $FC_Plot
##
## attr(,"class")
## [1] "XX"
The qpcrMeans
performs fold change \({\Delta \Delta C_t}\) mwthid analysis using a model produced by the
qpcrANOVAFC
or qpcrREPEATED.
The values can be returned for any effects in the model including simple effects,
interactions and slicing if an ANOVA model is used, but ANCOVA models returned by rtpcr package only include simple effects.
# Returning fold change values from a fitted model.
# Firstly, result of `qpcrANOVAFC` or `qpcrREPEATED` is
# acquired which includes a model object:
res <- qpcrANOVAFC(data_3factor, numberOfrefGenes = 1, mainFactor.column = 1, block = NULL)
## Warning in qpcrANOVAFC(data_3factor, numberOfrefGenes = 1, mainFactor.column =
## 1, : The R level was used as calibrator.
## NOTE: Results may be misleading due to involvement in interactions
## ANOVA table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## Type 24.834 24.8336 1 24 84.8207 2.392e-09 ***
## Conc 45.454 22.7269 2 24 77.6252 3.319e-11 ***
## SA 0.032 0.0324 1 24 0.1107 0.7422788
## Type:Conc 10.641 5.3203 2 24 18.1718 1.567e-05 ***
## Type:SA 6.317 6.3168 1 24 21.5756 0.0001024 ***
## Conc:SA 3.030 1.5150 2 24 5.1747 0.0135366 *
## Type:Conc:SA 3.694 1.8470 2 24 6.3086 0.0062852 **
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## ANCOVA table
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## SA 0.032 0.0324 1 31 0.0327 0.8577
## Conc 45.454 22.7269 2 31 22.9429 7.682e-07 ***
## Type 24.834 24.8336 1 31 25.0696 2.105e-05 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 R 1.0000 1 0.0000 0.0000 0.3939 0.7611 1.3139
## 2 S vs R 3.1626 0 *** 2.4433 4.0936 0.3064 2.5575 3.9109
##
## Fold Change plot of the main factor levels
# Returning fold change values of Conc levels from a fitted model:
qpcrMeans(res$lm_ANOVA, specs = "Conc")
## contrast FC SE df LCL UCL p.value sig
## M vs L 1.307369 0.2208988 22 0.951681 1.795994 0.0940 .
## H vs L 5.869889 0.2208988 22 4.272905 8.063742 <.0001 ***
## H vs M 4.489848 0.2208988 22 3.268323 6.167915 <.0001 ***
##
## Results are averaged over the levels of: Type, SA
## Degrees-of-freedom method: kenward-roger
## Confidence level used: 0.95
# Returning fold change values of Conc levels sliced by Type*SA:
qpcrMeans(res$lm_ANOVA, specs = "Conc | (Type*SA)")
## Type = R, SA = A1:
## contrast FC SE df LCL UCL p.value sig
## M vs L 2.198724 0.4417977 22 1.165084 4.14939 0.0174 *
## H vs L 3.466148 0.4417977 22 1.836681 6.54125 0.0005 ***
## H vs M 1.576436 0.4417977 22 0.835339 2.97502 0.1514
##
## Type = S, SA = A1:
## contrast FC SE df LCL UCL p.value sig
## M vs L 0.521233 0.4417977 22 0.276197 0.98366 0.0448 *
## H vs L 3.732132 0.4417977 22 1.977623 7.04321 0.0003 ***
## H vs M 7.160201 0.4417977 22 3.794126 13.51259 <.0001 ***
##
## Type = R, SA = A2:
## contrast FC SE df LCL UCL p.value sig
## M vs L 4.913213 0.4417977 22 2.603467 9.27212 <.0001 ***
## H vs L 27.095850 0.4417977 22 14.357849 51.13476 <.0001 ***
## H vs M 5.514895 0.4417977 22 2.922293 10.40760 <.0001 ***
##
## Type = S, SA = A2:
## contrast FC SE df LCL UCL p.value sig
## M vs L 0.518830 0.4417977 22 0.274923 0.97913 0.0434 *
## H vs L 3.386981 0.4417977 22 1.794731 6.39184 0.0006 ***
## H vs M 6.528116 0.4417977 22 3.459190 12.31973 <.0001 ***
##
## Degrees-of-freedom method: kenward-roger
## Confidence level used: 0.95
# Returning fold change values of Conc
qpcrMeans(res$lm_ANOVA, specs = "Conc * Type")
## contrast FC SE df LCL UCL p.value sig
## M R vs L R 3.286761 0.3123981 22 2.097677 5.14989 <.0001 ***
## H R vs L R 9.691142 0.3123981 22 6.185081 15.18464 <.0001 ***
## L S vs L R 8.168097 0.3123981 22 5.213044 12.79824 <.0001 ***
## M S vs L R 4.247655 0.3123981 22 2.710939 6.65547 <.0001 ***
## H S vs L R 29.040613 0.3123981 22 18.534303 45.50251 <.0001 ***
## H R vs M R 2.948538 0.3123981 22 1.881816 4.61994 0.0001 ***
## L S vs M R 2.485151 0.3123981 22 1.586073 3.89388 0.0004 ***
## M S vs M R 1.292353 0.3123981 22 0.824806 2.02493 0.2489
## H S vs M R 8.835632 0.3123981 22 5.639078 13.84418 <.0001 ***
## L S vs H R 0.842842 0.3123981 22 0.537918 1.32061 0.4382
## M S vs H R 0.438303 0.3123981 22 0.279734 0.68676 0.0010 ***
## H S vs H R 2.996614 0.3123981 22 1.912499 4.69527 <.0001 ***
## M S vs L S 0.520030 0.3123981 22 0.331894 0.81481 0.0063 **
## H S vs L S 3.555371 0.3123981 22 2.269109 5.57076 <.0001 ***
## H S vs M S 6.836857 0.3123981 22 4.363420 10.71238 <.0001 ***
##
## Results are averaged over the levels of: SA
## Degrees-of-freedom method: kenward-roger
## Confidence level used: 0.95
# Returning fold change values of Conc levels sliced by Type:
res2 <- qpcrMeans(res$lm_ANOVA, specs = "Conc | Type")
twoFACTORplot(res2, x.axis.factor = contrast, ylab = "Fold Change",
group.factor = Type, errorbar = "ci")
library(ggplot2)
b <- qpcrANOVARE(data_3factor, numberOfrefGenes = 1, block = NULL)$Result
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 11 94.001 8.5456 29.188 3.248e-11 ***
## Residuals 24 7.027 0.2928
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## Type Conc SA RE LCL UCL se Lower.se Upper.se letters
## 1 S H A2 5.1934 3.3217 8.1197 0.1309 4.7429 5.6867 a
## 2 S H A1 2.9690 1.8990 4.6420 0.0551 2.8577 3.0846 ab
## 3 R H A2 1.7371 1.1110 2.7159 0.0837 1.6392 1.8409 bc
## 4 S L A2 1.5333 0.9807 2.3973 0.0865 1.4441 1.6280 c
## 5 R H A1 0.9885 0.6323 1.5455 0.0841 0.9325 1.0478 cd
## 6 S L A1 0.7955 0.5088 1.2438 0.2128 0.6864 0.9219 d
## 7 S M A2 0.7955 0.5088 1.2438 0.2571 0.6656 0.9507 d
## 8 R M A1 0.6271 0.4011 0.9804 0.4388 0.4626 0.8500 de
## 9 S M A1 0.4147 0.2652 0.6483 0.2540 0.3478 0.4945 ef
## 10 R M A2 0.3150 0.2015 0.4925 0.2890 0.2578 0.3849 f
## 11 R L A1 0.2852 0.1824 0.4459 0.0208 0.2811 0.2893 f
## 12 R L A2 0.0641 0.0410 0.1002 0.8228 0.0362 0.1134 g
a <- qpcrANOVARE(data_3factor, numberOfrefGenes = 1, block = NULL)$Final_data
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 11 94.001 8.5456 29.188 3.248e-11 ***
## Residuals 24 7.027 0.2928
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## Type Conc SA RE LCL UCL se Lower.se Upper.se letters
## 1 S H A2 5.1934 3.3217 8.1197 0.1309 4.7429 5.6867 a
## 2 S H A1 2.9690 1.8990 4.6420 0.0551 2.8577 3.0846 ab
## 3 R H A2 1.7371 1.1110 2.7159 0.0837 1.6392 1.8409 bc
## 4 S L A2 1.5333 0.9807 2.3973 0.0865 1.4441 1.6280 c
## 5 R H A1 0.9885 0.6323 1.5455 0.0841 0.9325 1.0478 cd
## 6 S L A1 0.7955 0.5088 1.2438 0.2128 0.6864 0.9219 d
## 7 S M A2 0.7955 0.5088 1.2438 0.2571 0.6656 0.9507 d
## 8 R M A1 0.6271 0.4011 0.9804 0.4388 0.4626 0.8500 de
## 9 S M A1 0.4147 0.2652 0.6483 0.2540 0.3478 0.4945 ef
## 10 R M A2 0.3150 0.2015 0.4925 0.2890 0.2578 0.3849 f
## 11 R L A1 0.2852 0.1824 0.4459 0.0208 0.2811 0.2893 f
## 12 R L A2 0.0641 0.0410 0.1002 0.8228 0.0362 0.1134 g
# Arrange factor levels to your desired order:
b$Conc <- factor(b$Conc, levels = c("L","M","H"))
a$Conc <- factor(a$Conc, levels = c("L","M","H"))
# Generating plot
ggplot(b, aes(x = Type, y = RE, fill = factor(Conc))) +
geom_bar(stat = "identity", position = "dodge") +
facet_wrap(~ SA) +
scale_fill_brewer(palette = "Reds") +
xlab("Type") +
ylab("Relative Expression") +
geom_point(data = a, aes(x = Type, y = (2^(-wDCt)), fill = factor(Conc)),
position = position_dodge(width = 0.9), color = "black") +
ylab("ylab") +
xlab("xlab") +
theme_bw() +
theme(axis.text.x = element_text(size = 12, color = "black", angle = 0, hjust = 0.5),
axis.text.y = element_text(size = 12, color = "black", angle = 0, hjust = 0.5),
axis.title = element_text(size = 12),
legend.text = element_text(size = 12)) +
theme(legend.position = c(0.2, 0.7)) +
theme(legend.title = element_text(size = 12, color = "black")) +
scale_y_continuous(breaks = seq(0, max(b$RE) + max(b$se) + 0.1, by = 5),
limits = c(0, max(b$RE) + max(b$se) + 0.1), expand = c(0, 0))
## Warning: A numeric `legend.position` argument in `theme()` was deprecated in ggplot2
## 3.5.0.
## ℹ Please use the `legend.position.inside` argument of `theme()` instead.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.
If the residuals from a t.test
or an lm
or and lmer
object are not normally distributed, the significance results might be violated. In such cases, one could use non-parametric tests such as the Mann-Whitney test (also known as the Wilcoxon rank-sum test), wilcox.test()
, which is an alternative to t.test
, or the kruskal.test()
test which alternative to one-way analysis of variance, to test the difference between medians of the populations using independent samples. However, the t.test
function (along with the qpcrTTEST
function described above) includes the var.equal
argument. When set to FALSE
, perform t.test
under the unequal variances hypothesis. Residuals for lm
(from qpcrANOVARE
and qpcrANOVAFC
functions) and lmer
(from qpcrREPEATED
function) objects can be extracted and plotted as follow:
residuals <- qpcrANOVARE(data_1factor, numberOfrefGenes = 1, block = NULL)$lmCRD$residuals
## Analysis of Variance Table
##
## Response: wDCt
## Df Sum Sq Mean Sq F value Pr(>F)
## T 2 4.9393 2.46963 12.345 0.007473 **
## Residuals 6 1.2003 0.20006
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Relative expression table
## SA RE LCL UCL se Lower.se Upper.se letters
## 1 L3 0.9885 0.6379 1.5318 0.0841 0.9325 1.0478 a
## 2 L2 0.6271 0.4047 0.9717 0.4388 0.4626 0.8500 a
## 3 L1 0.2852 0.1840 0.4419 0.0208 0.2811 0.2893 b
shapiro.test(residuals)
##
## Shapiro-Wilk normality test
##
## data: residuals
## W = 0.84232, p-value = 0.06129
par(mfrow = c(1,2))
plot(residuals)
qqnorm(residuals)
qqline(residuals, col = "red")
For the repeated measure models, residulas can be extracted by residuals(a$lm)
and plotted by plot(residuals(a$lm))
where ‘a’ is an object created by the qpcrREPEATED
function.
a <- qpcrREPEATED(data_repeated_measure_2,
numberOfrefGenes = 1,
factor = "time",
block = NULL,
y.axis.adjust = 1.5)
## Warning in qpcrREPEATED(data_repeated_measure_2, numberOfrefGenes = 1, factor =
## "time", : The level 1 of the selected factor was used as calibrator.
## NOTE: Results may be misleading due to involvement in interactions
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 5.9166 2.95832 2 8 3.4888 0.08139 .
## treatment 0.6773 0.67728 1 4 0.7987 0.42199
## time:treatment 6.3186 3.15932 2 8 3.7258 0.07186 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 0.7036 0.6140 1.6286
## 2 time2 vs time1 1.2556 0.5540 0.4381 3.5987 0.5323 0.8682 1.8159
## 3 time3 vs time1 2.5432 0.0351 * 0.8873 7.2895 0.7074 1.5575 4.1527
##
## Fold Change plot of the main factor levels
residuals(a$lm)
## 1 2 3 4 5 6 7
## -0.5566160 0.5633840 -0.3466160 -0.1133883 0.1466117 0.5466117 0.6700042
## 8 9 10 11 12 13 14
## -0.7099958 -0.1999958 0.3401353 0.3968019 -0.7965314 -1.2933207 -0.5666540
## 15 16 17 18
## 1.1400126 0.9531854 0.1698521 -0.3434812
plot(residuals(a$lm))
qqnorm(residuals(a$lm))
qqline(residuals(a$lm), col = "red")
Calculating the mean of technical replicates and getting an output table appropriate for subsequent ANOVA analysis can be done using the meanTech
function. For this, the input data set should follow the column arrangement of the following example data. Grouping columns must be specified under the groups
argument of the meanTech
function.
# See example input data frame:
data_withTechRep
## factor1 factor2 factor3 biolrep techrep Etarget targetCt Eref refCt
## 1 Line1 Heat Ctrl 1 1 2 33.346 2 31.520
## 2 Line1 Heat Ctrl 1 2 2 28.895 2 29.905
## 3 Line1 Heat Ctrl 1 3 2 28.893 2 29.454
## 4 Line1 Heat Ctrl 2 1 2 30.411 2 28.798
## 5 Line1 Heat Ctrl 2 2 2 33.390 2 31.574
## 6 Line1 Heat Ctrl 2 3 2 33.211 2 31.326
## 7 Line1 Heat Ctrl 3 1 2 33.845 2 31.759
## 8 Line1 Heat Ctrl 3 2 2 33.345 2 31.548
## 9 Line1 Heat Ctrl 3 3 2 32.500 2 31.477
## 10 Line1 Heat Treat 1 1 2 33.006 2 31.483
## 11 Line1 Heat Treat 1 2 2 32.588 2 31.902
## 12 Line1 Heat Treat 1 3 2 33.370 2 31.196
## 13 Line1 Heat Treat 2 1 2 36.820 2 31.440
## 14 Line1 Heat Treat 2 2 2 32.750 2 31.300
## 15 Line1 Heat Treat 2 3 2 32.450 2 32.597
## 16 Line1 Heat Treat 3 1 2 35.238 2 31.461
## 17 Line1 Heat Treat 3 2 2 28.532 2 30.651
## 18 Line1 Heat Treat 3 3 2 28.285 2 30.745
# Calculating mean of technical replicates
meanTech(data_withTechRep, groups = 1:4)
## factor1 factor2 factor3 biolrep Etarget targetCt Eref refCt
## 1 Line1 Heat Ctrl 1 2 30.37800 2 30.29300
## 2 Line1 Heat Ctrl 2 2 32.33733 2 30.56600
## 3 Line1 Heat Ctrl 3 2 33.23000 2 31.59467
## 4 Line1 Heat Treat 1 2 32.98800 2 31.52700
## 5 Line1 Heat Treat 2 2 34.00667 2 31.77900
## 6 Line1 Heat Treat 3 2 30.68500 2 30.95233
qpcrANOVAFC
and twoFACTORplot
functions give FC results for one gene each time. you can combine FC tables of different genes and present their bar plot by twoFACTORplot
function. An example has been shown bellow for two genes, however it works for any number of genes.
a <- qpcrREPEATED(data_repeated_measure_1,
numberOfrefGenes = 1,
factor = "time", block = NULL)
## Warning in qpcrREPEATED(data_repeated_measure_1, numberOfrefGenes = 1, factor =
## "time", : The level 1 of the selected factor was used as calibrator.
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 11.073 5.5364 2 4 4.5382 0.09357 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 1.4051 0.3776 2.6484
## 2 time2 vs time1 0.8566 0.8166 0.0923 7.9492 0.9753 0.4357 1.6841
## 3 time3 vs time1 4.7022 0.0685 . 0.5067 43.6368 0.5541 3.2026 6.9040
##
## Fold Change plot of the main factor levels
b <- qpcrREPEATED(data_repeated_measure_2,
factor = "time",
numberOfrefGenes = 1, block = NULL)
## Warning in qpcrREPEATED(data_repeated_measure_2, factor = "time",
## numberOfrefGenes = 1, : The level 1 of the selected factor was used as
## calibrator.
## NOTE: Results may be misleading due to involvement in interactions
## Type III Analysis of Variance Table with Satterthwaite's method
## Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
## time 5.9166 2.95832 2 8 3.4888 0.08139 .
## treatment 0.6773 0.67728 1 4 0.7987 0.42199
## time:treatment 6.3186 3.15932 2 8 3.7258 0.07186 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Fold Change table
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se
## 1 time1 1.0000 1.0000 0.0000 0.0000 0.7036 0.6140 1.6286
## 2 time2 vs time1 1.2556 0.5540 0.4381 3.5987 0.5323 0.8682 1.8159
## 3 time3 vs time1 2.5432 0.0351 * 0.8873 7.2895 0.7074 1.5575 4.1527
##
## Fold Change plot of the main factor levels
a1 <- a$FC_statistics_of_the_main_factor
b1 <- b$FC_statistics_of_the_main_factor
c <- rbind(a1, b1)
c$gene <- factor(c(1,1,1,2,2,2))
c
## contrast FC pvalue sig LCL UCL se Lower.se Upper.se gene
## 1 time1 1.0000 1.0000 0.0000 0.0000 1.4051 0.3776 2.6484 1
## 2 time2 vs time1 0.8566 0.8166 0.0923 7.9492 0.9753 0.4357 1.6841 1
## 3 time3 vs time1 4.7022 0.0685 . 0.5067 43.6368 0.5541 3.2026 6.9040 1
## 4 time1 1.0000 1.0000 0.0000 0.0000 0.7036 0.6140 1.6286 2
## 5 time2 vs time1 1.2556 0.5540 0.4381 3.5987 0.5323 0.8682 1.8159 2
## 6 time3 vs time1 2.5432 0.0351 * 0.8873 7.2895 0.7074 1.5575 4.1527 2
twoFACTORplot(c, x.axis.factor = contrast,
group.factor = gene, fill = 'Reds', errorbar = "se",
ylab = "FC", axis.text.x.angle = 45, y.axis.adjust = 1.5,
axis.text.x.hjust = 1, legend.position = c(0.2, 0.8))
the rtpcr graphical functions create a list containing the ggplot object so for editing or adding new layers to the graph output, you need to extract the ggplot object first:
b <- qpcrANOVAFC(data_2factor,
numberOfrefGenes = 1,
mainFactor.column = 1,
block = NULL,
mainFactor.level.order = c("S", "R"),
fill = c("#CDC673", "#EEDD82"),
analysisType = "ancova",
fontsizePvalue = 7,
y.axis.adjust = 0.1, width = 0.35)
library(ggplot2)
p2 <- b$FC_Plot_of_the_main_factor_levels
p2 + theme_set(theme_classic(base_size = 20))
citation("rtpcr")
Email: gh.mirzaghaderi at uok.ac.ir
Livak, Kenneth J, and Thomas D Schmittgen. 2001. Analysis of Relative Gene Expression Data Using Real-Time Quantitative PCR and the Double Delta CT Method. Methods 25 (4). doi.org/10.1006/meth.2001.1262.
Ganger, MT, Dietz GD, Ewing SJ. 2017. A common base method for analysis of qPCR data and the application of simple blocking in qPCR experiments. BMC bioinformatics 18, 1-11. doi.org/10.1186/s12859-017-1949-5.
Pfaffl MW, Horgan GW, Dempfle L. 2002. Relative expression software tool (REST©) for group-wise comparison and statistical analysis of relative expression results in real-time PCR. Nucleic acids research 30, e36-e36. doi.org/10.1093/nar/30.9.e36.
Taylor SC, Nadeau K, Abbasi M, Lachance C, Nguyen M, Fenrich, J. 2019. The ultimate qPCR experiment: producing publication quality, reproducible data the first time. Trends in Biotechnology, 37(7), 761-774doi.org/10.1016/j.tibtech.2018.12.002.
Yuan, JS, Ann Reed, Feng Chen, and Neal Stewart. 2006. Statistical Analysis of Real-Time PCR Data. BMC Bioinformatics 7 (85). doi.org/10.1186/1471-2105-7-85.
.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.