The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
Workflow for general data preprocessing
using rtry
This vignette is intended to demonstrate how to use the ‘rtry’
package to preprocess data exported from the TRY database, from
importing and exploring the data to binding multiple datasets, to
selecting, excluding specific data using user-defined criteria and
removing duplicates, and finally exporting the preprocessed data.
Prepare the workflow
environment
Make sure you have the ‘rtry’ package installed. If not, you may
refer to the vignette “Introduction to
rtry” (rtry-introduction).
To start, set the working directory to the desired location:
# Set the working directory
setwd("<path_to_dir>")
# Check the working directory
getwd()
Note: The character “\” is used as escape character in R
to give the following character special meaning (e.g. “\n”
for newline, “\t” for tab, “\r” for carriage
return and so on). Therefore, for Windows users, it is important to use
the “\” in the file path of the command instead of
“/” in order for R to correctly understand the input
path.
Load the required packages using the commands:
# Load the rtry package
library(rtry)
# Check the version of rtry
packageVersion("rtry")
Import TRY data
rtry_import() takes five arguments input,
separator, encoding, quote and
showOverview, and returns a data table that contains the
entire dataset. Since the function by default imports the text file
exported from the TRY database for further processing, to import the TRY
data, simply type in the path to the text file.
In the context of this example workflow, we will use the trait data
provided within the ‘rtry’ package. In this specific case the input
argument for the file data_TRY_15160.txt can be obtained
via system.file() that finds the full file path to the
‘rtry’ package:
# Obtain and print the path to the sample dataset within the rtry package
path_to_data <- system.file("testdata", "data_TRY_15160.txt", package = "rtry")
path_to_data
## [1] "C:/Program Files/R/R-4.0.5/library/rtry/testdata/data_TRY_15160.txt"
# Import TRY data requests into data frames
TRYdata1 <- rtry_import(path_to_data)
## input: C:/Program Files/R/R-4.0.5/library/rtry/testdata/data_TRY_15160.txt
## dim: 1782 28
## col: LastName FirstName DatasetID Dataset SpeciesName AccSpeciesID AccSpeciesName ObservationID ObsDataID TraitID TraitName DataID DataName OriglName OrigValueStr OrigUnitStr ValueKindName OrigUncertaintyStr UncertaintyName Replicates StdValue UnitName RelUncertaintyPercent OrigObsDataID ErrorRisk Reference Comment V28
Note: You may ignore the message
“Registered S3 method overwritten by <package_name>”
if it appears.
The rtry_import function stores data in a format
consistent with both classes data.table and
data.frame. There are two ways to view the imported data
(in this case TRYdata1).
Method 1: Print the first 6 rows of the
TRYdata1 using the command:
Method 2: View the entire TRYdata1, use
the following command and the data viewer (only available in RStudio)
will be prompted:
We see that datasets released from TRY are in a long-table format,
where the traits are defined in the columns TraitID and
TraitName. Ancillary data are defined in the columns
DataID and DataName, which also provide
additional information for the traits.
Import another sample TRY dataset (data_TRY_15161.txt)
within the ‘rtry’ package:
path_to_data <- system.file("testdata", "data_TRY_15161.txt", package = "rtry")
path_to_data
## [1] "C:/Program Files/R/R-4.0.5/library/rtry/testdata/data_TRY_15161.txt"
TRYdata2 <- rtry_import(path_to_data)
## input: C:/Program Files/R/R-4.0.5/library/rtry/testdata/data_TRY_15161.txt
## dim: 4627 28
## col: LastName FirstName DatasetID Dataset SpeciesName AccSpeciesID AccSpeciesName ObservationID ObsDataID TraitID TraitName DataID DataName OriglName OrigValueStr OrigUnitStr ValueKindName OrigUncertaintyStr UncertaintyName Replicates StdValue UnitName RelUncertaintyPercent OrigObsDataID ErrorRisk Reference Comment V28
Again to view the imported data, use either of the following
commands:
Explore the imported
data
rtry_explore() takes four arguments input,
..., sortBy and showOverview, and
converts the input into a grouped data table based on the specified
column names. To provide a first understanding of the data, an
additional column is added to show the total count within each group. By
default (if sortBy is not specified), the output data are
grouped by the first attribute.
To explore the data TRYdata1 based on
TraitID and TraitName, use the following:
TRYdata1_explore_trait <- rtry_explore(TRYdata1, TraitID, TraitName)
Note: You may ignore the message
“Registered S3 method overwritten by <package_name>”
if it appears.
View the output data using the command:
View(TRYdata1_explore_trait)
With this, it is clear that the TRYdata1 only includes
data with two TraitID (3115 and 3116). And that within this
dataset, there are 1632 ancillary data, i.e. the entries where
TraitID is NA.
Next, further exploration of TRYdata1 can be done based
on the AccSpeciesID, AccSpeciesName,
TraitID and TraitName.
TRYdata1_explore_species <- rtry_explore(TRYdata1, AccSpeciesID, AccSpeciesName, TraitID, TraitName)
View(TRYdata1_explore_species)
The output is, by default, sorted by AccSpeciesID. The
TRYdata1 only contains three consolidated species (with
AccSpeciesID equals 10773, 35846 and 45737). Each
consolidated species has records where the TraitID equals
3115 and 3116, as well as the corresponding ancillary data.
After reassuring the data contains the necessary traits and species,
for the purpose of preprocessing, it is also necessary to understand
which ancillary data are provided within the dataset. To do so, explore
the TRYdata based on DataID,
DataName, TraitID and TraitName.
This time, the exploration is sorted by TraitID to see if
there are similar data in each trait.
# Group the input data based on DataID, DataName, TraitID and TraitName
# and sort the output by TraitID using the sortBy argument
TRYdata1_explore_anc <- rtry_explore(TRYdata1, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
View(TRYdata1_explore_anc)
With this exploration and the way it is sorted, it is clear that in
the TRYdata1: (1) there are two traits
(TraitID 3115 and 3116); (2) within each trait, whether or
not similar data exists (DataID and DataName);
and (3) what types of ancillary data are provided (DataID
and DataName, TraitID: NA) and
how many (Count).
In the case of TraitID 3115, it can be seen that
DataID 7222 and 7223 contain the extreme values (min or
max) of the “Leaf specific area (SLA): petiole excluded”. This
information might be useful later on when further preprocessing is
performed.
A similar procedure can be performed on the other TRY data
(TRYdata2).
# Group the input data based on TraitID and TraitName
TRYdata2_explore_trait <- rtry_explore(TRYdata2, TraitID, TraitName)
# Group the input data based on AccSpeciesID, AccSpeciesName, TraitID and TraitName
# Note: For TraitID == "NA", meaning that entry is an ancillary data
TRYdata2_explore_species <- rtry_explore(TRYdata2, AccSpeciesID, AccSpeciesName, TraitID, TraitName)
# Group the input data based on DataID, DataName, TraitID and TraitName
# Then sort the output by TraitID using the sortBy argument
TRYdata2_explore_anc <- rtry_explore(TRYdata2, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
## dim: 2 3
## dim: 6 5
## dim: 236 5
Then use either head() or View() function
to view the data.
Via View(TRYdata2_explore_anc), it can be seen that in
the TRYdata2: (1) there is only one trait, with the
TraitID equals to 3117; (2) within this trait, whether or
not similar data exists; and (3) what types of ancillary data could be
found and how many (Count).
Here, it is clear that DataID 6584 and 6598 share very
similar DataName. This could mean that in the original
dataset, two values of “SLA: undefined if petiole in- or excluded” were
mapped to this trait, and the user might want to have this information
in mind before further preprocessing.
Bind imported data by
rows
rtry_bind_row() takes two arguments ... and
showOverview. It takes a sequence of data and combines them
by rows. Note: A common attribute is not necessary (difference to the
function rtry_join_left and rtry_join_outer)
and the binding process simply puts the data one after another while
matching the column names, and any missing columns will be filled with
NA.
With the two TRY data TRYdata1 and TRYdata2
already imported, it is possible to combine the two datasets into one
(TRYdata):
TRYdata <- rtry_bind_row(TRYdata1, TRYdata2)
## dim: 6409 28
## col: LastName FirstName DatasetID Dataset SpeciesName AccSpeciesID AccSpeciesName ObservationID ObsDataID TraitID TraitName DataID DataName OriglName OrigValueStr OrigUnitStr ValueKindName OrigUncertaintyStr UncertaintyName Replicates StdValue UnitName RelUncertaintyPercent OrigObsDataID ErrorRisk Reference Comment V28
From the dimension, it can be seen that now the two imported data
have been combined together by rows, with TRYdata1 on top
then followed by TRYdata2, and a new data
TRYdata has been created.
Now this combined data TRYdata can be explored using
once again rtry_explore().
# Group the input data based on TraitID and TraitName
TRYdata_explore_trait <- rtry_explore(TRYdata, TraitID, TraitName)
# Group the input data based on AccSpeciesID, AccSpeciesName, TraitID and TraitName
# Note: For TraitID == "NA", meaning that entry is an ancillary data
TRYdata_explore_species <- rtry_explore(TRYdata, AccSpeciesID, AccSpeciesName, TraitID, TraitName)
# Group the input data based on DataID, DataName, TraitID and TraitName
# Then sort the output by TraitID using the sortBy argument
TRYdata_explore_anc <- rtry_explore(TRYdata, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
## dim: 4 3
## dim: 12 5
## dim: 331 5
To view the data, use either head() or
View().
Select columns
Within the ‘rtry’ package, there are two ways to reduce the number of
columns, i.e. either selecting the columns to keep:
rtry_select_col() or explicitly removing certain columns:
rtry_remove_col().
Note: To ensure that the later preprocessing steps (such as data
selection and duplicates removal) work properly, do not remove the
column ObservationID and OrigObsDataID.
rtry_select_col() takes three arguments
input, ... and showOverview in
order to select specified columns from the imported data.
rtry_remove_col() takes also three arguments
input, ... and showOverview to
remove the specified columns from the input data instead.
It is up to the users to decide which function they prefer in
retrieving the relevant columns of the data. In general, it would be
easier to use the rtry_remove_col() when user would like to
keep most of the columns and remove only a small fraction of the data
column, such as V28.
workdata <- rtry_remove_col(TRYdata, V28)
## dim: 6409 27
## col: LastName FirstName DatasetID Dataset SpeciesName AccSpeciesID AccSpeciesName ObservationID ObsDataID TraitID TraitName DataID DataName OriglName OrigValueStr OrigUnitStr ValueKindName OrigUncertaintyStr UncertaintyName Replicates StdValue UnitName RelUncertaintyPercent OrigObsDataID ErrorRisk Reference Comment
From the feedback in the console, it can be seen that only the column
V28 has been removed, therefore, the output
workdata contains 27 columns, instead of the original 28.
And users can continue removing columns if convenient.
On the other hand, if users are clear which columns they would like
to keep, a more direct approach is, of course, the use of
rtry_select_col():
workdata <- rtry_select_col(workdata, ObsDataID, ObservationID, AccSpeciesID, AccSpeciesName, ValueKindName, TraitID, TraitName, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, UnitName, OrigObsDataID, ErrorRisk, Comment)
## dim: 6409 17
## col: ObsDataID ObservationID AccSpeciesID AccSpeciesName ValueKindName TraitID TraitName DataID DataName OriglName OrigValueStr OrigUnitStr StdValue UnitName OrigObsDataID ErrorRisk Comment
Here, from the feedback in the console, the users can confirm the
remaining columns within the data (in this case the
workdata), and continue to reduce the number of columns by
selecting only the relevant columns.
Select rows
rtry_select_row() takes five arguments
input, ..., getAncillary,
rmDuplicates and showOverview to select
specified rows based on the specified criteria from the imported data.
Note that the argument getAncillary makes use of the
ObservationID provided within the TRY data to select the
whole observation including all corresponding ancillary data during the
row extraction process.
For our example we will select all trait records, but only relevant
ancillary data.
First, identify the relevant ancillary data using the
rtry_explore function.
workdata_explore_anc <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
To view the data, use either head() or
View().
We retrieve six DataIDs with trait records and 325
DataIDs with ancillary information. For further data
preprocessing, we decide to select the following DataIDs
that contain the relevant information:
- 59 Latitude
- 60 Longitude
- 61 Altitude
- 6601 Sampling date
- 327 Exposition
- 413 Plant developmental status / plant age / maturity / plant life
stage
- 1961 Health status of plants (vitality)
- 113 Reference / source
To select all trait records and the ancillary data of interest:
workdata <- rtry_select_row(workdata, TraitID > 0 | DataID %in% c(59, 60, 61, 6601, 327, 413, 1961, 113))
To view the data, use either head() or
View().
In order to better understand the data, inside the data viewer (only
available via RStudio), click on the column ObservationID
to sort the dataset. This way, it can be seen that for example:
- For
ObservationID 94068, there are two
ObsDataID 1021243 and 1021245 with the first one belonging
to the TraitID 3115 and the latter an ancillary data.
Looking deeper into the DataID and DataName,
we can see that this data “SLA: petiole excluded” is measured within
“growth chambers”, and could be eliminated later on depending on the
research question.
- For
ObservationID 158137, we can see there are four
ancillary data with the DataID 59, 60, 61 and 413. Looking
further into the ErrorRisk of the data “SLA: petiole
excluded”, which is roughly 2.5, meaning the observation is 2.5 standard
deviation away from the mean. This is probably a “good” value that we
would want to keep later. On top of this, it can be seen that the
OrigObsDataID is NA, meaning that it is not a
duplicate. Also, the “Plant developmental status” (DataID
413) could be an important information for further processing.
To check if the required data are selected, the
rtry_explore() can be used:
workdata_explore_anc <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
Then use the command View(workdata_explore_anc) to view
the output in the data viewer.
Save and load backup
data
It is recommended to backup the data at some stages of the
preprocessing, best before excluding according to different
attributes.
# Save workdata_unexcluded as backup
workdata_unexcluded <- workdata
If necessary, load the backup data using the following:
# Load workdata_unexcluded
workdata <- workdata_unexcluded
Exclude (remove)
data
The ‘rtry’ package provides the function rtry_exclude to
exclude (remove) non-representative data.
rtry_exclude() takes four arguments input,
..., baseOn and showOverview to
exclude data from the input data based on the specified criteria.
The rtry_exclude function is designed to use the
baseOn argument with either the column header
ObservationID or ObsDataID. When the
baseOn argument is set to ObservationID, the
function removes all records of the whole observation if one selection
criteria is fulfilled. If the baseOn argument is set to
ObsDataID, only the (trait) record, which fulfills the
selection criteria is removed. Other column headers may be used for the
baseOn argument, but the result would need to be checked
carefully.
The rtry_exclude function is very powerful and can be
used on a range of different criteria. This function is therefore key
for data cleaning. The workflow provides examples for the exclusion of
whole observations using ancillary data (8.1 and 8.2), and the exclusion
of single trait records according to additional trait specifications
(8.3) and outliers (8.4 and 8.5).
Exclude (remove)
observations of juvenile plants or saplings
For demonstration purpose, we remove the data where the observed
plant is juvenile or a sapling. We keep only observations on the mature
or adult plants and the observations where information on the
developmental state is explicitly unknown or is not provided (no
DataID 413 for the given observation), assuming no
information would rather follow the recommended measurement protocol -
here measuring traits on mature plant.
First, identify the DataID that contains the information
about plant development status, i.e. 413. To check the
different development status under the OrigValueStr column
using the functions rtry_select_row() and
rtry_explore(). The temporary data is saved as
tmp_unfiltered.
# Select the rows where DataID is 413, i.e. the data containing the plant development status
tmp_unfiltered <- rtry_select_row(workdata, DataID %in% 413)
# Then explore the unique values of the OrigValueStr within the selected data
tmp_unfiltered <- rtry_explore(tmp_unfiltered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, Comment, sortBy = OrigValueStr)
## dim: 104 17
## dim: 7 8
By sorting the exploration by OrigValueStr, it is clear
what types of developmental state exist in the dataset. This way it is
possible to set the criteria and start the excluding process using
rtry_exclude().
In this case, to exclude the juvenile plants and saplings, we need to
use the keywords “juvenile” and “saplings” when using the
rtry_exclude function.
# Criteria
# 1. DataID equals to 413
# 2. OrigValueStr equals to "juvenile" or "saplings"
workdata <- rtry_exclude(workdata, (DataID %in% 413) & (OrigValueStr %in% c("juvenile", "saplings")), baseOn = ObservationID)
Once the excluding is completed, double-check the
workdata using the functions rtry_select_row
and rtry_explore. The temporary data is saved as
tmp_filtered.
# Select the rows where DataID is 413, i.e. the data containing the plant development status
# Then explore the unique values of the OrigValueStr within the selected data
tmp_filtered <- rtry_select_row(workdata, DataID %in% 413)
tmp_filtered <- rtry_explore(tmp_filtered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, Comment, sortBy = OrigValueStr)
## dim: 91 17
## dim: 5 8
From the exploration, it is clear that all the juvenile and sapling
plants were excluded as expected.
To further confirm if the trait and/or other ancillary data of the
deleted development states were also removed accordingly, use again the
rtry_explore function.
# Group the input data based on DataID, DataName, TraitID and TraitName
# Then sort the output by TraitID using the sortBy argument
workdata_explore_anc_excluded <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
Compared with the workdata_explore_anc, it can be seen
that the number of traits and ancillary data also decreased, which is as
expected. We can see as well, that observations without a record for
DataID 413 have not been removed by the exclude function,
since it is assumed that these observations were measured according to
the recommended measurement protocol (measuring traits on mature
plants).
To also exclude the observations without information on plant
development state as well, the user would first select only the
observations, which include DataID 413, using the function
rtry_select_row (please see the following example on
geo-referenced data).
Exclude observations
without geo-referenced information and from irrelevant regions
To keep only the geo-referenced observations from a certain region
for further processing, users can make use of the ancillary data
“Latitude” (DataID 59) and “Longitude” (DataID
60). To ensure the excluding works as expected, it is best to perform
the excluding process one after one. In this case, exclude according to
latitude, then longitude.
Filter according to latitude
First, obtain only the observations that contain the Latitude
(DataID 59) information, i.e. geo-referenced observations,
using the function rtry_select_row.
# Select only the geo-referenced observations, i.e. with DataID 59 Latitude
# Set getAncillary to TRUE to obtain (keep) all traits and ancillary data
workdata <- rtry_select_row(workdata, DataID %in% 59, getAncillary = TRUE)
Next, check the DataID that contains the latitude
information, i.e. 59, and check the different states of the
StdValue using the functions rtry_select_row
and rtry_explore.
# Select the rows that contain DataID 59, i.e. latitude information
# Then explore the unique values of the StdValue within the selected data
tmp_unfiltered <- rtry_select_row(workdata, DataID %in% 59)
tmp_unfiltered <- rtry_explore(tmp_unfiltered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, Comment, sortBy = StdValue)
## dim: 149 17
## dim: 55 8
For demonstration purpose, the following example excludes the
latitude smaller than 40 or when such information is missing,
i.e. NA.
# Exclude observations using latitude information
# Criteria
# 1. DataID equals to 59
# 2. StdValue smaller than 40 or NA
workdata <- rtry_exclude(workdata, (DataID %in% 59) & (StdValue < 40 | is.na(StdValue)), baseOn = ObservationID)
Once the excluding is completed, double check the
workdata using the functions rtry_select_row
and rtry_explore.
# Select the rows where DataID is 59 (Latitude)
# Then explore the unique values of the StdValue within the selected data
# Sort the exploration by StdValue
tmp_filtered <- rtry_select_row(workdata, DataID %in% 59)
tmp_filtered <- rtry_explore(tmp_filtered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, Comment, sortBy = StdValue)
## dim: 131 17
## dim: 42 8
From the exploration result, it is clear that only the latitude
values larger than or equal to 40 remains.
Filter according to longitude
A similar procedure will be performed for longitude
(DataID 60). To ensure the all the observations within the
workdata contains the longitude information, use the
rtry_select_row function.
# Select only the geo-referenced observations with DataID 60 Longitude
# Set getAncillary to TRUE to obtain (keep) all traits and ancillary data
workdata <- rtry_select_row(workdata, DataID %in% 60, getAncillary = TRUE)
For demonstration purpose, this time we show how to remove the region
of outside a certain range. The column StdValue will be
used for the excluding process. To identify which values to be excluded,
use the rtry_select_row and rtry_explore
functions to explore the dataset.
# Select the rows that contain DataID 60, i.e. longitude information
# Then explore the unique values of the StdValue within the selected data
tmp_unfiltered <- rtry_select_row(workdata, DataID %in% 60)
tmp_unfiltered <- rtry_explore(tmp_unfiltered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, Comment, sortBy = StdValue)
## dim: 130 17
## dim: 41 8
After data exploration, use the following command to exclude the
longitude smaller than 10 or larger than 60 or when such information is
missing, i.e. NA.
# Exclude observations using longitude information
# Criteria
# 1. DataID equals to 60
# 2. StdValue smaller than 10 or larger than 60 or NA
workdata <- rtry_exclude(workdata, (DataID %in% 60) & (StdValue < 10 | StdValue > 60 | is.na(StdValue)), baseOn = ObservationID)
Once the excluding is completed, double check the
workdata using the functions rtry_select_row
and rtry_explore.
# Select the rows where DataID is 60 (Longitude)
# Then explore the unique values of the StdValue within the selected data
# Sort the exploration by StdValue
tmp_filtered <- rtry_select_row(workdata, DataID %in% 60)
tmp_filtered <- rtry_explore(tmp_filtered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, Comment, sortBy = StdValue)
## dim: 47 17
## dim: 18 8
From the exploration result, it is clear that only the latitude
values in between 10 and 60 remain.
In the above examples the argument baseOn is set to
ObservationID. This removes the whole observations. To
select traits measured following standard measurement protocols and from
specified environment we recommend to check at least the following
DataIDs:
- 59 Latitude
- 60 Longitude
- 61 Altitude
- 6601 Sampling date
- 327 Exposition
- 413 Plant developmental status / plant age / maturity / plant life
stage
- 1961 Health status of plants (vitality)
- 113 Reference / source
Exclude
non-representative sub-traits
In this and the following examples, the argument baseOn
is set to ObsDataID. These examples are supposed to exclude
individual trait records or outliers, while keeping the rest of the
observation, because the observation might contain records for other
traits with relevant measurements.
In this context it might be of interest to remove non-representative
sub-traits. This information can usually be found in the column
DataName. In order to identify these data, explore the
workdata based on DataID,
DataName, TraitID and TraitName.
Then sort the exploration by TraitID, this way it is
possible to see if there are similar data in each trait. Note: This step
has already been performed in the previous step, but for demonstration
purpose and completeness of this example, the same function is called
again.
# Group the input data based on DataID, DataName, TraitID and TraitName
# Then sort the output by TraitID using the sortBy argument
tmp_unfiltered <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
From this exploration, it can be seen that DataID 7222
and 7223 contains the minimum and maximum value of the “Leaf specific
area (SLA: petiole excluded)” for trait 3115. Depending on the research
question, the user might want to remove these observations. The same
goes for DataID 6598 in trait 3117, where two values of
“SLA: undefined if petiole in- or excluded” had been provided.
Now that the excluding criteria have been identified, the user might
decide to only remove the trait records for DataID 7222,
7223 and 6598, while keeping the rest of the observation, because it
might contain relevant records for other traits. In this case, use the
rtry_exclude function with baseOn specified to
ObsDataID:
# Criteria
# 1. DataID equals to 7222, 7223 or 6598
workdata <- rtry_exclude(workdata, DataID %in% c(7222, 7223, 6598), baseOn = ObsDataID)
Double check the workdata using the functions
rtry_select_row and rtry_explore.
# Group the input data based on DataID, DataName, TraitID and TraitName
# Then sort the output by TraitID using the sortBy argument
tmp_filtered <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, sortBy = TraitID)
It is clear that the defined DataIDs have been removed,
while the corresponding ancillary data are kept.
Exclude data
according to standard values (StdValue)
For demonstration purposes, we assume the user has decided that SLA
(specific leaf area) values below 5 mm2mg-1 are
out of the relevant range for the purpose of the analyses.
Knowing that the SLA values can be found in DataID 6582,
6583 and 6584, first check if values below 5 exist in the dataset using
the functions rtry_select_row and
rtry_explore. The temporary data are saved as
tmp_unfiltered. Note: To exclude numeric values, it is
recommended to use the column StdValue.
# Select the rows where DataID is 6582, 6583 and 6584, i.e. the data containing the SLA information
# Then explore the unique values of the StdValue within the selected data
tmp_unfiltered <- rtry_select_row(workdata, DataID %in% c(6582, 6583, 6584))
tmp_unfiltered <- rtry_explore(tmp_unfiltered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, UnitName, Comment, sortBy = StdValue)
## dim: 43 17
## dim: 31 9
Here, it can be seen that there are three trait records with SLA
value less than 5 mm2mg-1. To exclude these
records, use the following command:
# Criteria
# 1. DataID equals to 6582, 6583 or 6584
# 2. StdValue smaller than 5
workdata <- rtry_exclude(workdata, (DataID %in% c(6582, 6583, 6584)) & (StdValue < 5), baseOn = ObsDataID)
Once the excluding is completed, it is always recommended to double
check the workdata using the functions
rtry_select_row and rtry_explore.
# Select the rows where DataID is 6582, 6583 and 6584, i.e. the data containing the SLA information
# Then explore the unique values of the StdValue within the selected data
tmp_filtered <- rtry_select_row(workdata, DataID %in% c(6582, 6583, 6584))
tmp_filtered <- rtry_explore(tmp_filtered, DataID, DataName, OriglName, OrigValueStr, OrigUnitStr, StdValue, UnitName, Comment, sortBy = StdValue)
## dim: 40 17
## dim: 30 9
Exclude outliers
according to error risk (ErrorRisk)
The final example for the excluding process would be to remove the
outliers identified in the context of TRY data integration. To do so, we
take advantage of the column ErrorRisk provided inside the
TRY output. The ErrorRisk quantifies the maximum distance
of the trait record from a respective mean at the species, genus or
family level in terms of standard deviation (a modified
z-transformation). An ErrorRisk value of 3 indicates that
the trait record is three standard deviations larger or smaller than the
mean value based on species, genus or family (Kattge et al. 2011, 2020). We here filter the
data with ErrorRisk larger than or equal to 3.0. With this
in mind, the rtry_explore function is used to explore the
data.
# Group the input data based on DataID, DataName, TraitID, TraitName and ErrorRisk
# Then sort the output by ErrorRisk using the sortBy argument
tmp_unfiltered <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, ErrorRisk, sortBy = ErrorRisk)
From the exploration result, it can be seen that there are two
outliers (with ErrorRisk larger than 3.0 in this case). It
can also be observed that for those ErrorRisk equals NA,
data may contain the geo-reference information and exposition of the
observation. These are the values where ErrorRisk does not
apply and should be kept.
After understanding what data to be excluded, use the
rtry_exclude function to perform the data removal:
# Criteria
# 1. ErrorRisk larger than or equal to 3
workdata <- rtry_exclude(workdata, ErrorRisk >= 3, baseOn = ObsDataID)
Always double check the excluded data before continuing the
preprocessing.
# Group the input data based on DataID, DataName, TraitID, TraitName and ErrorRisk
# Then sort the output by ErrorRisk using the sortBy argument
tmp_filtered <- rtry_explore(workdata, DataID, DataName, TraitID, TraitName, ErrorRisk, sortBy = ErrorRisk)
From the exploration result, it can be seen that the outliers
(i.e. ErrorRisk larger than or equal to 3.0) were
removed.
Remove duplicates based
on duplicate identifier (OrigObsDataID)
As of July 2019, the TRY database comprised 588 data sets from 765
data contributors (Kattge et al. 2020). To keep track of
potential duplicate entries, a unique identifier
OrigObsDataID is assigned when the probability is high that
certain trait records have previously been contributed (Kattge et al. 2020). With the help of
this OrigObsDataID, the ‘rtry’ package provides a function
rtry_remove_dup for users to easily remove the duplicates
from the data for further processing.
rtry_remove_dup() takes two arguments input
and showOverview, and returns a data table of the input
data after removing the duplicates. Note: This function depends on the
duplicate identifier OrigObsDataID listed in the TRY data,
therefore, if the column OrigObsDataID has been removed,
this function will not work. Also, if the original, not duplicate, trait
record was not imported to ‘rtry’ (e.g. if only public data or specific
datasets were requested from TRY and the original trait record was part
of the restricted data or another dataset) the duplicates identified by
TRY will still be removed, resulting in data loss.
To remove the duplicates from workdata, simply use the
call the function:
# Remove duplicates
workdata <- rtry_remove_dup(workdata)
## 13 duplicates removed.
## dim: 200 17
Once the function is called and executed, by default the number of
duplicates removed and the resulting dimension of the data will be
displayed on the console as reference.
Transform to wide
table
For data management purposes, the TRY data is structured as a
long-table, and this is what has been used so far. However, for human
operators, it is often more common to read and understand a dataset in a
wide-table format. Therefore, the ‘rtry’ package offers the function
rtry_trans_wider for users to transform the long-table into
a wide-table (i.e. increasing the number of columns and decreasing the
number of rows) when needed. The rtry_trans_wider function
represents the selected data-types (traits, ancillary data) as columns
and every observation becomes one row.
rtry_trans_wider() takes five arguments
input, names_from, values_from,
values_fn and showOverview to transform the
original long-table format of the TRY data into a wide-table format.
Note: This function is based on the function
tidyr::pivot_wider.
To ensure the long-table to wide-table transformation would not
result in duplicate entries because of the potentially existence of
multiple ObservationID for a single trait, the first step
is to select only the traits with numerical values, and then the
relevant columns will be selected.
#-------------------------------------------------
# Exclude
# 1. All entries with "" in TraitID
# 2. Potential categorical traits that don't have a StdValue
# 3. Traits that have not yet been standardized in TRY
# Then select the relevant columns for transformation
# Note: The complete.cases() is used to ensure the cases are complete,
# i.e. have no missing values
#-------------------------------------------------
num_traits <- rtry_select_row(workdata, complete.cases(TraitID) & complete.cases(StdValue))
num_traits <- rtry_select_col(num_traits, ObservationID, AccSpeciesID, AccSpeciesName, TraitID, TraitName, StdValue, UnitName)
## dim: 25 17
## dim: 25 7
## col: ObservationID AccSpeciesID AccSpeciesName TraitID TraitName StdValue UnitName
Now that only the traits with numerical values were selected, in
order to keep the ancillary data while transforming the data from
long-table into wide-table on traits, the ancillary data needs to be
added as additional columns before proceeding.
For demonstration purpose, the latitude and longitude information
will be added to the input data to create a geo-referenced trait table
before proceeding. To extract the unique values of the ancillary data
and the corresponding ObservationID, use the
rtry_select_anc function.
# Extract the unique value of latitude (DataID 59) and longitude (DataID 60) together with the corresponding ObservationID
workdata_georef <- rtry_select_anc(workdata, 59, 60)
## dim: 47 3
## col: ObservationID Latitude Longitude
Next, add the extracted latitude and longitude information to the
traits. To do so, make use of the ObservationID in both the
trait records and the extracted ancillary data to merge the data frames.
And in order to keep all the trait records, a left join should be used.
This can be done using the rtry_join_left function provided
in the ‘rtry’ package.
# To merge the extracted ancillary data with the numerical traits
# Merge the relevant data frames based on the ObservationID using rtry_join_left (left join)
num_traits_georef <- rtry_join_left(num_traits, workdata_georef, baseOn = ObservationID)
## dim: 25 9
## col: ObservationID AccSpeciesID AccSpeciesName TraitID TraitName StdValue UnitName Latitude Longitude
It can be seen that the extracted latitude and longitude information
were added to the right of the numerical traits.
Once the trait records and the necessary ancillary data were
prepared, the transformation is performed on the TraitID,
TraitName and UnitName, meaning to get the
name of these three columns as part of the name of the output column
(names_from), and then use the StdValue as the
cell values (values_from). Also, the mean function is to be
applied to each cell in the output (values_fn), e.g. if
several trait records were measured within the same observation, because
the tidyr::pivot_wider function accepts only one record per
trait or ancillary data (column) and observation (row). To do so, use
the following command:
# Perform wide table transformation on TraitID, TraitName and UnitName
# With cell values to be the mean values calculated for StdValue
num_traits_georef_wider <- rtry_trans_wider(num_traits_georef, names_from = c(TraitID, TraitName, UnitName), values_from = c(StdValue), values_fn = list(StdValue = mean))
Immediately, it can be seen that the columns TraitID,
TraitName and UnitName were “transformed” into
new columns, which were named for example “3115_Leaf area per leaf dry
mass (specific leaf area, SLA or 1/LMA): petiole excluded_mm2 mg-1”.
Export preprocessed
TRY data
The rtry_export() takes four arguments
data, output, quote and
encoding for users to export the preprocessed data as a CSV
file. Note: If the specified output directory does not exist, it will be
created automatically.
To save the two preprocessed wide tables
workdata_wider_traits and workdata_wider_data,
simply:
# Export the data into a CSV file
output_file = file.path(tempdir(), "workdata_wider_traits.csv")
rtry_export(num_traits_georef_wider, output_file)
## File saved at: C:/Users/user/AppData/Local/Temp/Rtmp4wJAvQ/workdata_wider_traits.csv
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
