The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
The aim of the R package survstan is to provide a toolkit for fitting survival models using Stan.
The R package survstan can be used to fit right-censored survival data under independent censoring. The implemented models allow the fitting of survival data in the presence/absence of covariates. All inferential procedures are currently based on the maximum likelihood (ML) approach.
You can install the released version of survstan from CRAN with:
You can install the development version of survstan from GitHub with:
Let \((t_{i}, \delta_{i})\) be the observed survival time and its corresponding failure indicator, \(i=1, \cdots, n\), and \(\boldsymbol{\theta}\) be a \(k \times 1\) vector of parameters. Then, the likelihood function for right-censored survival data under independent censoring can be expressed as:
\[ L(\boldsymbol{\theta}) = \prod_{i=1}^{n}f(t_{i}|\boldsymbol{\theta})^{\delta_{i}}S(t_{i}|\boldsymbol{\theta})^{1-\delta_{i}}. \]
The maximum likelihood estimate (MLE) of \(\boldsymbol{\theta}\) is obtained by directly maximization of \(\log(L(\boldsymbol{\theta}))\) using the rstan::optimizing() function. The function rstan::optimizing() further provides the hessian matrix of \(\log(L(\boldsymbol{\theta}))\), needed to obtain the observed Fisher information matrix, which is given by:
\[ \mathscr{I}(\hat{\boldsymbol{\theta}}) = -\frac{\partial^2}{\partial \boldsymbol{\theta}\boldsymbol{\theta}'} \log L(\boldsymbol{\theta})\mid_{\boldsymbol{\theta}=\hat{\boldsymbol{\theta}}}, \]
Inferences on \(\boldsymbol{\theta}\) are then based on the asymptotic properties of the MLE, \(\hat{\boldsymbol{\theta}}\), that state that:
\[ \hat{\boldsymbol{\theta}} \asymp N_{k}(\boldsymbol{\theta}, \mathscr{I}^{-1}(\hat{\boldsymbol{\theta}})). \]
Some of the most popular baseline survival distributions are implemented in the R package survstan. Such distributions include:
The parametrizations adopted in the package survstan are presented next.
If \(T \sim \mbox{Exp}(\lambda)\), then
\[ f(t|\lambda) = \lambda\exp\left\{-\lambda t\right\}I_{[0, \infty)}(t), \] where \(\lambda>0\) is the rate parameter.
The survival and hazard functions in this case are given by:
\[ S(t|\lambda) = \exp\left\{-\lambda t\right\} \] and \[ h(t|\lambda) = \lambda. \]
If \(T \sim \mbox{Weibull}(\alpha, \gamma)\), then
\[ f(t|\alpha, \gamma) = \frac{\alpha}{\gamma^{\alpha}}t^{\alpha-1}\exp\left\{-\left(\frac{t}{\gamma}\right)^{\alpha}\right\}I_{[0, \infty)}(t), \] where \(\alpha>0\) and \(\gamma>0\) are the shape and scale parameters, respectively.
The survival and hazard functions in this case are given by:
\[ S(t|\alpha, \gamma) = \exp\left\{-\left(\frac{t}{\gamma}\right)^{\alpha}\right\} \] and \[ h(t|\alpha, \gamma) = \frac{\alpha}{\gamma^{\alpha}}t^{\alpha-1}. \]
If \(T \sim \mbox{LN}(\mu, \sigma)\), then
\[ f(t|\mu, \sigma) = \frac{1}{\sqrt{2\pi}t\sigma}\exp\left\{-\frac{1}{2}\left(\frac{log(t)-\mu}{\sigma}\right)^2\right\}I_{[0, \infty)}(t), \] where \(-\infty < \mu < \infty\) and \(\sigma>0\) are the mean and standard deviation in the log scale of \(T\).
The survival and hazard functions in this case are given by:
\[S(t|\mu, \sigma) = \Phi\left(\frac{-log(t)+\mu}{\sigma}\right)\] and \[h(t|\mu, \sigma) = \frac{f(t|\mu, \sigma)}{S(t|\mu, \sigma)},\] where \(\Phi(\cdot)\) is the cumulative distribution function of the standard normal distribution.
If \(T \sim \mbox{LL}(\alpha, \gamma)\), then
\[ f(t|\alpha, \gamma) = \frac{\frac{\alpha}{\gamma}\left(\frac{t}{\gamma}\right)^{\alpha-1}}{\left[1 + \left(\frac{t}{\gamma}\right)^{\alpha}\right]^2}I_{[0, \infty)}(t), ~ \alpha>0, \gamma>0, \]
where \(\alpha>0\) and \(\gamma>0\) are the shape and scale parameters, respectively.
The survival and hazard functions in this case are given by:
\[S(t|\alpha, \gamma) = \frac{1}{1+ \left(\frac{t}{\gamma}\right)^{\alpha}}\] and \[ h(t|\alpha, \gamma) = \frac{\frac{\alpha}{\gamma}\left(\frac{t}{\gamma}\right)^{\alpha-1}}{1 + \left(\frac{t}{\gamma}\right)^{\alpha}}. \]
If \(T \sim \mbox{Gamma}(\alpha, \lambda)\), then
\[f(t|\alpha, \lambda) = \frac{\lambda^{\alpha}}{\Gamma(\alpha)}t^{\alpha-1}\exp\left\{-\lambda t\right\}I_{[0, \infty)}(t),\]
where \(\Gamma(\alpha) = \int_{0}^{\infty}u^{\alpha-1}\exp\{-u\}du\) is the gamma function.
The survival function is given by
\[S(t|\alpha, \lambda) = 1 - \frac{\gamma^{*}(\alpha, \lambda t)}{\Gamma(\alpha)},\] where \(\gamma^{*}(\alpha, \lambda t)\) is the lower incomplete gamma function, which is available only numerically. Finally, the hazard function is expressed as:
\[h(t|\alpha, \lambda) = \frac{f(t|\alpha, \lambda)}{S(t|\alpha, \lambda)}.\]
If \(T \sim \mbox{ggstacy}(\alpha, \gamma, \kappa)\), then
\[f(t|\alpha, \gamma, \kappa) = \frac{\kappa}{\gamma^{\alpha}\Gamma(\alpha/\kappa)}t^{\alpha-1}\exp\left\{-\left(\frac{t}{\gamma}\right)^{\kappa}\right\}I_{[0, \infty)}(t),\] for \(\alpha>0\), \(\gamma>0\) and \(\kappa>0\).
It can be show that the survival function can be expressed as:
\[S(t|\alpha, \gamma, \kappa) = S_{G}(x|\nu, 1),\] where \(x = \displaystyle\left(\frac{t}{\gamma}\right)^\kappa\), and \(F_{G}(\cdot|\nu, 1)\) corresponds to the distribution function of a gamma distribution with shape parameter \(\nu = \alpha/\gamma\) and scale parameter equals to 1.
Finally, the hazard function is expressed as:
\[h(t|\alpha, \gamma, \kappa) = \frac{f(t|\alpha, \gamma, \kappa)}{S(t|\alpha, \gamma, \kappa)}.\]
If \(T \sim \mbox{ggprentice}(\mu, \sigma, \varphi)\), then
\[f(t | \mu, \sigma, \varphi) = \begin{cases} \frac{|\varphi|(\varphi^{-2})^{\varphi^{-2}}}{\sigma t\Gamma(\varphi^{-2})}\exp\{\varphi^{-2}[\varphi w - \exp(\varphi w)]\}I_{[0, \infty)}(t), & \varphi \neq 0 \\ \frac{1}{\sqrt{2\pi}t\sigma}\exp\left\{-\frac{1}{2}\left(\frac{log(t)-\mu}{\sigma}\right)^2\right\}I_{[0, \infty)}(t), & \varphi = 0 \end{cases} \] where \(w = \frac{\log(t) - \mu}{\sigma}\), for \(-\infty < \mu < \infty\), \(\sigma>0\) and \(-\infty < \varphi < \infty\)$.
It can be show that the survival function can be expressed as:
\[ S(t|\mu, \sigma, \varphi) = \begin{cases} S_{G}(x|1/\varphi^2, 1), & \varphi > 0 \\ 1-S_{G}(x|1/\varphi^2, 1), & \varphi < 0 \\ S_{LN}(x|\mu, \sigma), & \varphi = 0 \end{cases} \] where \(x = \frac{1}{\varphi^2}\exp\{\varphi w\}\), \(S_{G}(\cdot|1/\varphi^2, 1)\) is the distribution function of a gamma distribution with shape parameter \(1/\varphi^2\) and scale parameter equals to 1, and \(S_{LN}(x|\mu, \sigma)\) corresponds to the survival function of a lognormal distribution with location parameter \(\mu\) and scale parameter \(\sigma\).
Finally, the hazard function is expressed as:
\[h(t|\alpha, \gamma, \kappa) = \frac{f(t|\alpha, \gamma, \kappa)}{S(t|\alpha, \gamma, \kappa)}.\]
If \(T \sim \mbox{Gamma}(\alpha, \gamma)\), then
\[f(t|\alpha, \lambda) = \alpha\exp\left\{\gamma x-\frac{\alpha}{\gamma}\left(e^{\gamma x} - 1\right)\right\}I_{[0, \infty)}(t).\]
The survival and hazard functions are given, respectively, by
\[S(t|\alpha, \lambda) = \exp\left\{-\frac{\alpha}{\gamma}\left(e^{\gamma x} - 1\right)\right\}.\] and
\[h(t|\alpha, \lambda) = \alpha\exp\{\gamma x}.\]
Let \(T \sim \mbox{rayleigh}(\sigma)\), where \(\sigma>0\) is a scale parameter. Then, the density, survival and hazard functions are respectively given by:
\[f(t|\sigma) = \frac{x}{\sigma^2}\exp\left\{-\frac{x^2}{2\sigma^2}\right\},\] \[S(t|\sigma) = \exp\left\{-\frac{x^2}{2\sigma^2}\right\}\] and
\[h(t|\sigma) = \frac{x}{\sigma^2}.\]
If \(T \sim \mbox{fatigue}(\alpha, \gamma)\), then
\[ f(t|\alpha, \gamma) = \frac{\sqrt{\frac{t}{\gamma}}+\sqrt{\frac{\gamma}{t}}}{2 \alpha t}\phi\left(\sqrt{\frac{t}{\gamma}}+\sqrt{\frac{\gamma}{t}}\right)(t), ~ \alpha>0, \gamma>0, \]
where \(\phi(\cdot)\) is the probability density function of a standard normal distribution, \(\alpha>0\) and \(\gamma>0\) are the shape and scale parameters, respectively.
The survival function in this case is given by:
\[ S(t|\alpha, \gamma) =\Phi\left(\sqrt{\frac{t}{\gamma}}-\sqrt{\frac{\gamma}{t}}\right)(t) \],
where \(\Phi(\cdot)\) is the cumulative distribution function of a standard normal distribution. The hazard function is given by \[h(t|\mu, \sigma) = \frac{f(t|\alpha, \gamma)}{S(t|\alpha, \gamma)}. \]
When covariates are available, it is possible to fit six different regression models with the R package survstan:
The regression survival models implemented in the R package survstan are briefly described in the sequel. Denote by \(\mathbf{x}\) a \(1\times p\) vector of covariates, and let \(\boldsymbol{\beta}\) and \(\boldsymbol{\phi}\) be \(p \times 1\) vectors of regression coefficients, and \(\boldsymbol{\theta}\) a vector of parameters associated with some baseline survival distribution. To ensure identifiability of the implemented regression models, we shall assume that the linear predictors \(\mathbf{x} \boldsymbol{\beta}\) and \(\mathbf{x} \boldsymbol{\phi}\) do not include an intercept term.
Accelerated failure time (AFT) models are defined as
\[ T = \exp\{\mathbf{x} \boldsymbol{\beta}\}\nu, \] where \(\nu\) follows a baseline distribution with survival function \(S_{0}(\cdot|\boldsymbol{\theta})\) so that
\[ f(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = e^{-\mathbf{x} \boldsymbol{\beta}}f_{0}(te^{-\mathbf{x} \boldsymbol{\beta}}|\boldsymbol{\theta}) \] and
\[ S(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = S_{0}(t e^{-\mathbf{x} \boldsymbol{\beta}}|\boldsymbol{\theta}). \]
Proportional hazards (PH) models are defined as
\[ h(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = h_{0}(t|\boldsymbol{\theta})\exp\{\mathbf{x} \boldsymbol{\beta}\}, \] where \(h_{0}(t|\boldsymbol{\theta})\) is a baseline hazard function so that
\[ f(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = h_{0}(t|\boldsymbol{\theta})\exp\left\{\mathbf{x} \boldsymbol{\beta} - H_{0}(t|\boldsymbol{\theta})e^{\mathbf{x} \boldsymbol{\beta}}\right\}, \] and
\[ S(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = \exp\left\{ - H_{0}(t|\boldsymbol{\theta})e^{\mathbf{x} \boldsymbol{\beta}}\right\}. \]
Proportional Odds (PO) models are defined as
\[ R(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = R_{0}(t|\boldsymbol{\theta})\exp\{\mathbf{x} \boldsymbol{\beta}\}, \] where \(\displaystyle R_{0}(t|\boldsymbol{\theta}) = \frac{1-S_{0}(t|\boldsymbol{\theta})}{S_{0}(t|\boldsymbol{\theta})} = \exp\{H_{0}(t|\boldsymbol{\theta})\}-1\) is a baseline odds function so that
\[ f(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = \frac{h_{0}(t|\boldsymbol{\theta})\exp\{\mathbf{x} \boldsymbol{\beta} + H_{0}(t|\boldsymbol{\theta})\}}{[1 + R_{0}(t|\boldsymbol{\theta})e^{\mathbf{x} \boldsymbol{\beta}}]^2}. \]
and
\[ S(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = \frac{1}{1 + R_{0}(t|\boldsymbol{\theta})e^{\mathbf{x} \boldsymbol{\beta}}}. \]
Accelerated hazard (AH) models can be defined as
\[h(t|\boldsymbol{\theta}, \boldsymbol{\beta},\mathbf{x}) = h_{0}\left(t/e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta}\right)\]
so that
\[S(t|\boldsymbol{\theta}, \boldsymbol{\beta},\mathbf{x}) = \exp\left\{- H_{0}\left(t/ e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta}\right)e^{\mathbf{x}\boldsymbol{\beta}} \right\} \] and \[f(t|\boldsymbol{\theta}, \boldsymbol{\beta}, \mathbf{x}) = h_{0}\left(t/e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta}\right)\exp\left\{- H_{0}\left(t/ e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta}\right)e^{\mathbf{x}\boldsymbol{\beta}} \right\}. \]
The survival function of the extended hazard (EH) model is given by:
\[S(t|\boldsymbol{\theta},\boldsymbol{\beta}, \boldsymbol{\phi}) = \exp\left\{-H_{0}(t/e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta})\exp(\mathbf{x}(\boldsymbol{\beta} + \boldsymbol{\phi}))\right\}. \]
The hazard and the probability density functions are then expressed as:
\[h(t|\boldsymbol{\theta},\boldsymbol{\beta}, \boldsymbol{\phi}) = h_{0}(t/e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta})\exp\{\mathbf{x}\boldsymbol{\phi}\} \] and
\[f(t|\boldsymbol{\theta},\boldsymbol{\beta}, \boldsymbol{\phi}) = h_{0}(t/e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta})\exp\{\mathbf{x}\boldsymbol{\beta}\}\exp\left\{-H_{0}(t/e^{\mathbf{x}\boldsymbol{\beta}}|\boldsymbol{\theta})\exp(\mathbf{x}(\boldsymbol{\beta}+ \boldsymbol{\phi}))\right\}, \]
respectively.
The EH model includes the AH, AFT and PH models as particular cases when \(\boldsymbol{\phi} = \mathbf{0}\), \(\boldsymbol{\phi} = -\boldsymbol{\beta}\), and \(\boldsymbol{\beta} = \mathbf{0}\), respectively.
The survival function of the Yang and Prentice (YP) model is given by:
\[S(t|\boldsymbol{\theta},\boldsymbol{\beta}, \boldsymbol{\phi}) = \left[1+\frac{\kappa_{S}}{\kappa_{L}}R_{0}(t|\boldsymbol{\theta})\right]^{-\kappa_{L}}. \]
The hazard and the probability density functions are then expressed as:
\[h(t|\boldsymbol{\theta},\boldsymbol{\beta}, \boldsymbol{\phi}) = \frac{\kappa_{S}h_{0}(t|\boldsymbol{\theta})\exp\{H_{0}(t|\boldsymbol{\theta})\}}{\left[1+\frac{\kappa_{S}}{\kappa_{L}}R_{0}(t|\boldsymbol{\theta})\right]} \] and
\[f(t|\boldsymbol{\theta},\boldsymbol{\beta}, \boldsymbol{\phi}) = \kappa_{S}h_{0}(t|\boldsymbol{\theta})\exp\{H_{0}(t|\boldsymbol{\theta})\}\left[1+\frac{\kappa_{S}}{\kappa_{L}}R_{0}(t|\boldsymbol{\theta})\right]^{-(1+\kappa_{L})}, \]
respectively, where \(\kappa_{S} = \exp\{\mathbf{x}\boldsymbol{\beta}\}\) and \(\kappa_{L} = \exp\{\mathbf{x}\boldsymbol{\phi}\}\).
The YO model includes the PH and PO models as particular cases when \(\boldsymbol{\phi} = \boldsymbol{\beta}\) and \(\boldsymbol{\phi} = \mathbf{0}\), respectively.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.