The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

Frequency Analysis

Introduction

The freq and nested_freq functions are called to produce categorical-type summary statistics (i.e. counts and percentages) for character variables. These functions can be used to create all different types of categorical summary statistics tables.

Counts: statlist = statlist(“n”)

There are many uses for freq, the first one we’ll show is to create the first row of analysis set summary of population counts in the output. In the following table the subset argument is used to create the one row summary with the row heading specified in the rowtext argument.

tbl <- cdisc_adsl %>%
  freq(colvar = "TRT01PN",
       rowvar = "ITTFL",
       statlist = statlist("n"),
       subset = ITTFL == "Y",
       rowtext = "Analysis set: ITT")

knitr::kable(tbl)
label 0 54 81 row_type group_level
Analysis set: ITT 5 5 5 HEADER 0

Big N row, counts and percentages: statlist = statlist(c(“N”, “n (x.x%)”))

A typical call of using the freq function is to create the tbl chunk with:

tbl <- cdisc_adsl %>%
  freq(colvar = "TRT01PN",
       rowvar = "SEX",
       statlist = statlist(c("N","n (x.x%)")),
       row_header = "Sex")

knitr::kable(tbl)
label 0 54 81 row_type group_level
Sex HEADER 0
N 5 5 5 N 0
F 2 (40.0%) 1 (20.0%) 3 (60.0%) VALUE 0
M 3 (60.0%) 4 (80.0%) 2 (40.0%) VALUE 0

Using factor to order category summary

In the above table, F appears first and then M is shown. This is because SEX is a character variable and alphabetical sorting is applied to the summarized results. We can convert SEX to a factor variable with the customized order and labels for enabling the user-defined sorting.

tbl <- cdisc_adsl %>%
  mutate(SEX = factor(SEX, levels = c("M", "F"), labels = c("Male", "Female"))) %>%
  freq(colvar = "TRT01PN",
       rowvar = "SEX",
       statlist = statlist(c("N","n (x.x%)")),
       row_header = "Sex")

knitr::kable(tbl)
label 0 54 81 row_type group_level
Sex HEADER 0
N 5 5 5 N 0
Male 3 (60.0%) 4 (80.0%) 2 (40.0%) VALUE 0
Female 2 (40.0%) 1 (20.0%) 3 (60.0%) VALUE 0

Counts, denominators, and percentages: statlist = statlist(c(“n/N (x.x%)”))

In some outputs, the table mock-up may require showing the percentage denominator, which can be done by specifying statlist = statlist("n/N (x.x%)").

tbl <- cdisc_adsl %>%
  mutate(SEX = factor(SEX, levels = c("M", "F"), labels = c("Male", "Female"))) %>%
  freq(colvar = "TRT01PN",
       rowvar = "SEX",
       statlist = statlist("n/N (x.x%)"),
       row_header = "Sex")

knitr::kable(tbl)
label 0 54 81 row_type group_level
Sex HEADER 0
Male 3/5 (60.0%) 4/5 (80.0%) 2/5 (40.0%) VALUE 0
Female 2/5 (40.0%) 1/5 (20.0%) 3/5 (60.0%) VALUE 0

By processing: statlist = statlist(c(“N”, “n (x.x%)”))

By-processing splits the summary statistics by another character variable that can be specified in the argument of rowbyvar or tablebyvar. For the example shown below, age group categories are summarized by the SEX variable. In this scenario, the denominator should also be split by SEX in addition to TRT01PN, which can be done by statlist(c("N","n (x.x%)"), denoms_by = c("SEX", "TRT01PN")).

tbl <- cdisc_adsl %>%
  mutate(SEX = factor(SEX, levels = c("M", "F"), labels = c("Male", "Female"))) %>%
  freq(colvar = "TRT01PN",
       rowbyvar = "SEX",
       rowvar = "AGEGR1",
       statlist = statlist(c("N","n (x.x%)"), denoms_by = c("SEX", "TRT01PN")),
       row_header = "Age group")

knitr::kable(tbl)
label 0 54 81 row_type group_level SEX
Male BY_HEADER1 0 Male
Age group HEADER 0 Male
N 3 4 2 N 0 Male
<65 2 (66.7%) 0 1 (50.0%) VALUE 0 Male
>80 1 (33.3%) 1 (25.0%) 0 VALUE 0 Male
65-80 0 3 (75.0%) 1 (50.0%) VALUE 0 Male
Female BY_HEADER1 0 Female
Age group HEADER 0 Female
N 2 1 3 N 0 Female
<65 1 (50.0%) 0 0 VALUE 0 Female
>80 1 (50.0%) 1 (100.0%) 1 (33.3%) VALUE 0 Female
65-80 0 0 2 (66.7%) VALUE 0 Female

By default, the denominators are calculated by using colvar, tablebyvar, and rowbyvar. The above freq function call will also produce the same results without specifying the denoms_by argument inside the statlist function.

Padding factor levels on and off

When using rowbyvar to create by-processing summaries, some levels of the rowvar may have zero records as shown in the example below.

tbl <- cdisc_adsl %>%
  freq(colvar = "TRT01PN",
       rowbyvar = "ETHNIC",
       rowvar = "RACE",
       statlist = statlist(c("N","n (x.x%)")),
       row_header = "Race")

knitr::kable(tbl)
label 0 54 81 row_type group_level ETHNIC
HISPANIC OR LATINO BY_HEADER1 0 HISPANIC OR LATINO
Race HEADER 0 HISPANIC OR LATINO
N 2 0 0 N 0 HISPANIC OR LATINO
WHITE 2 (100.0%) - - VALUE 0 HISPANIC OR LATINO
NOT HISPANIC OR LATINO BY_HEADER1 0 NOT HISPANIC OR LATINO
Race HEADER 0 NOT HISPANIC OR LATINO
N 3 5 5 N 0 NOT HISPANIC OR LATINO
WHITE 3 (100.0%) 5 (100.0%) 5 (100.0%) VALUE 0 NOT HISPANIC OR LATINO

To remove the zero record rows and create the data driven summary, users can specify the pad = FALSE in the freq function.

tbl <- cdisc_adsl %>%
  freq(colvar = "TRT01PN",
       rowbyvar = "ETHNIC",
       rowvar = "RACE",
       statlist = statlist(c("N","n (x.x%)")),
       row_header = "Race",
       pad = FALSE)

knitr::kable(tbl)
label 0 54 81 row_type group_level ETHNIC
HISPANIC OR LATINO BY_HEADER1 0 HISPANIC OR LATINO
Race HEADER 0 HISPANIC OR LATINO
N 2 0 0 N 0 HISPANIC OR LATINO
WHITE 2 (100.0%) - - VALUE 0 HISPANIC OR LATINO
NOT HISPANIC OR LATINO BY_HEADER1 0 NOT HISPANIC OR LATINO
Race HEADER 0 NOT HISPANIC OR LATINO
N 3 5 5 N 0 NOT HISPANIC OR LATINO
WHITE 3 (100.0%) 5 (100.0%) 5 (100.0%) VALUE 0 NOT HISPANIC OR LATINO

Denominator Dataframe

When using frequency analysis you do not need to always use your main dataframe to calculate your denominators. For example, an adverse event table may use ADSL as the denominator dataframe instead of ADAE even though the counts are coming from ADAE. The example below shows a table counting AEDECOD but using ADSL to calculate the denominators.

adae <- cdisc_adae %>%
  rename(TRT01AN = TRTAN)

tbl <- adae %>%
  freq(denom_df = cdisc_adsl,
       colvar = "TRT01AN",
       rowvar = "AEDECOD",
       descending_by = "81")

knitr::kable(head(tbl, 10))
label 0 54 81 row_type group_level
APPLICATION SITE PRURITUS 1 (20.0) 2 (40.0) 5 (100.0) VALUE 0
APPLICATION SITE ERYTHEMA 1 (20.0) 1 (20.0) 4 (80.0) VALUE 0
FATIGUE 0 1 (20.0) 2 (40.0) VALUE 0
ACTINIC KERATOSIS 0 0 1 (20.0) VALUE 0
APPLICATION SITE IRRITATION 0 1 (20.0) 1 (20.0) VALUE 0
APPLICATION SITE PAIN 0 0 1 (20.0) VALUE 0
APPLICATION SITE VESICLES 0 1 (20.0) 1 (20.0) VALUE 0
CALCULUS URETHRAL 0 0 1 (20.0) VALUE 0
DEPRESSED MOOD 0 0 1 (20.0) VALUE 0
DYSPEPSIA 0 0 1 (20.0) VALUE 0

By processing and denominators: statlist = statlist(c(“n (x.x)”), denoms_by = “TRT01AN”)

When using by variables such as tablebyvar and rowbyvar the denominators may need to be changed to work correctly. This also works in conjunction with the denom_df argument. By default, the denominators are calculated by using colvar, tablebyvar, and rowbyvar. This works well if you are using the same dataframe for counts and denominators but this is not always the case. In the following example we are doing a similar table as above but using AESEV as a rowbyvar. In this example we don’t want our denoms by AESEV since that variable is not in ADSL, which is where our denominators are coming from. To change the variables by which our denoms are calculated by we use the denoms_by argument to the statlist function. Below you can see that we are using only our colvar of TRT01PN as our denoms_by.

tbl <- adae %>%
  freq(denom_df = cdisc_adsl,
       colvar = "TRT01AN",
       rowvar = "AEDECOD",
       rowbyvar = "AESEV",
       statlist = statlist(c("n (x.x)"), denoms_by = "TRT01AN"))

knitr::kable(head(tbl, 10))
label 0 54 81 row_type group_level AESEV
MILD BY_HEADER1 0 MILD
ACTINIC KERATOSIS 0 0 1 (20.0) VALUE 0 MILD
APPLICATION SITE DERMATITIS 0 0 0 VALUE 0 MILD
APPLICATION SITE ERYTHEMA 1 (20.0) 1 (20.0) 4 (80.0) VALUE 0 MILD
APPLICATION SITE IRRITATION 0 1 (20.0) 1 (20.0) VALUE 0 MILD
APPLICATION SITE PAIN 0 0 0 VALUE 0 MILD
APPLICATION SITE PRURITUS 1 (20.0) 2 (40.0) 5 (100.0) VALUE 0 MILD
APPLICATION SITE URTICARIA 0 1 (20.0) 0 VALUE 0 MILD
APPLICATION SITE VESICLES 0 1 (20.0) 0 VALUE 0 MILD
ARTHRALGIA 0 0 0 VALUE 0 MILD

Available statlist formats for frequency summary

We have shown the common use cases of calling different variants of the statlist for frequency summaries. The table below describes all available options to be specified for the statlist in freq.

Statlist Description
n count
n (x.x) count (percentage without %)
n (x.x%) count (percentage with %)
n/N count/denominator
n/N (x.x) count/denominator (percentage without %)
n/N (x.x%) count/denominator (percentage with %)

To learn more about using the statlist function for freq analysis, please type ?statlist in your console.

Nested Frequency Analysis

A major portion of Adverse Events (AE) summary tables require summarizing number of subjects with treatment-emergent adverse events by system organ class and preferred term, which is in a nested structure and needs additional processing on top of the freq function. Therefore, we developed the nested_freq function to address the nested structure (counts within counts):

In the example below, we will show you how to use these arguments in the nested_freq function call for creating the AE summary table by AEBODSYS and AEDECOD.

adae <- cdisc_adae %>%
  filter(SAFFL == "Y", TRTEMFL == "Y") %>%
  filter(AEBODSYS %in% c("GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS","SKIN AND SUBCUTANEOUS TISSUE DISORDERS")) %>%
  rename(TRT01AN = TRTAN)

adsl <- cdisc_adsl %>%
  filter(SAFFL == "Y")

For illustration purpose, we subset the adae data to only contain records in the 2 categories of system organ class: GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS, SKIN AND SUBCUTANEOUS TISSUE DISORDERS. So the table output is not too long and will be easier to visualize. In addition, we would like to sort the output by the active drug group (TRT01AN = 81) with descending frequency. Therefore, we specify descending_by = "81".

tbl <- nested_freq(adae,
                   denom_df = adsl,
                   colvar = "TRT01AN",
                   rowvar = "AEBODSYS*AEDECOD",
                   statlist = statlist("n (x.x%)"),
                   descending_by = "81",
                   row_header = "System organ class \\\n Preferred term")

knitr::kable(tbl)
label 0 54 81 row_type nested_level group_level AEBODSYS
System organ class
Preferred term
HEADER NA 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS 2 (40.0%) 3 (60.0%) 5 (100.0%) NESTED 0 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE PRURITUS 1 (20.0%) 2 (40.0%) 5 (100.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE ERYTHEMA 1 (20.0%) 1 (20.0%) 4 (80.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
FATIGUE 0 1 (20.0%) 2 (40.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE IRRITATION 0 1 (20.0%) 1 (20.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE PAIN 0 0 1 (20.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE VESICLES 0 1 (20.0%) 1 (20.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE DERMATITIS 0 1 (20.0%) 0 NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE URTICARIA 0 1 (20.0%) 0 NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
PYREXIA 1 (20.0%) 0 0 NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
SKIN AND SUBCUTANEOUS TISSUE DISORDERS 2 (40.0%) 2 (40.0%) 1 (20.0%) NESTED 0 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS
ACTINIC KERATOSIS 0 0 1 (20.0%) NESTED 1 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS
ERYTHEMA 1 (20.0%) 2 (40.0%) 0 NESTED 1 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS
PRURITUS 1 (20.0%) 1 (20.0%) 0 NESTED 1 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS
PRURITUS GENERALISED 0 1 (20.0%) 0 NESTED 1 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS
URTICARIA 0 1 (20.0%) 0 NESTED 1 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS

As shown in the output above, the most frequent system organ class is GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS, followed by SKIN AND SUBCUTANEOUS TISSUE DISORDERS. Within each system organ class, the preferred terms are also sorted by descending frequency. When there is a tie in the counts, the preferred terms are sorted alphabetically.

The cutoff feature is controlled by two arguments: cutoff and cutoff_stat. If we want to remove the rows of preferred terms with only 1 count in any treatment columns, we can specify cutoff = 2 and cutoff_stat = "n" in the nested_freq call below.

tbl <- nested_freq(adae,
                   denom_df = adsl,
                   colvar = "TRT01AN",
                   rowvar = "AEBODSYS*AEDECOD",
                   statlist = statlist("n (x.x%)"),
                   descending_by = "81",
                   cutoff = 2,
                   cutoff_stat = "n",
                   row_header = "System organ class \\\n Preferred term")

knitr::kable(tbl)
label 0 54 81 row_type nested_level group_level AEBODSYS
System organ class
Preferred term
HEADER NA 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS 2 (40.0%) 3 (60.0%) 5 (100.0%) NESTED 0 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE PRURITUS 1 (20.0%) 2 (40.0%) 5 (100.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE ERYTHEMA 1 (20.0%) 1 (20.0%) 4 (80.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
FATIGUE 0 1 (20.0%) 2 (40.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
SKIN AND SUBCUTANEOUS TISSUE DISORDERS 2 (40.0%) 2 (40.0%) 1 (20.0%) NESTED 0 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS
ERYTHEMA 1 (20.0%) 2 (40.0%) 0 NESTED 1 0 SKIN AND SUBCUTANEOUS TISSUE DISORDERS

The same cutoff results can also be achieved by specifying the cutoff percentage: cutoff = 25 and cutoff_stat = "pct". In our example, we only have 5 subjects in each arm and one subject count is equal to 20%, and so we need more than 20% as the cutoff.

For only keeping the preferred terms with at least 2 counts in the active arm of TRT01AN = 81 (i.e. not considering the other arms), we can specify cutoff = "81 >= 2" andcutoff_stat = “n”`.

tbl <- nested_freq(adae,
                   denom_df = adsl,
                   colvar = "TRT01AN",
                   rowvar = "AEBODSYS*AEDECOD",
                   statlist = statlist("n (x.x%)"),
                   descending_by = "81",
                   cutoff = "81 >= 2",
                   cutoff_stat = "n",
                   row_header = "System organ class \\\n Preferred term")

knitr::kable(tbl)
label 0 54 81 row_type nested_level group_level AEBODSYS
System organ class
Preferred term
HEADER NA 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS 2 (40.0%) 3 (60.0%) 5 (100.0%) NESTED 0 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE PRURITUS 1 (20.0%) 2 (40.0%) 5 (100.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
APPLICATION SITE ERYTHEMA 1 (20.0%) 1 (20.0%) 4 (80.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS
FATIGUE 0 1 (20.0%) 2 (40.0%) NESTED 1 0 GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.