The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.

Importing data from non .ddf sources

Vikram B. Baliga

2021-05-04

workloopR’s data import functions, such as read_ddf(), are generally geared towards importing data from .ddf files (e.g. those generated by Aurora Scientific’s Dynamic Muscle Control and Analysis Software).

Should your data be stored in another file format, you can use the as_muscle_stim() function to generate your own muscle_stim objects. These muscle_stim objects are used by nearly all other workloopR functions and are formatted in a very specific way. This helps ensure that other functions can interpret data & metadata correctly and also perform internal checks.

Load packages

Before running through anything, we’ll ensure we have the packages we need.

library(workloopR)
library(magrittr)
library(ggplot2)

Data

Because it is somewhat difficult to simulate muscle physiology data, we’ll use one of our workloop files, deconstruct it, and then re-assemble the data via as_muscle_stim().

## Load in the work loop example data from workloopR
workloop_dat <-
  system.file(
    "extdata",
    "workloop.ddf",
    package = 'workloopR') %>%
  read_ddf(phase_from_peak = TRUE) %>%
  fix_GR(GR = 2)

## First we'll extract Time
Time <- workloop_dat$Time
## Now Position
Position <- workloop_dat$Position
## Force
Force <- workloop_dat$Force
## Stimulation
Stim <- workloop_dat$Stim

## Put it all together as a data.frame
my_data <- data.frame(Time = Time,
                      Position = Position,
                      Force = Force,
                      Stim = Stim)

head(my_data)
#>    Time  Position   Force Stim
#> 1 1e-04 0.2519695 609.743    0
#> 2 2e-04 0.2530985 611.033    0
#> 3 3e-04 0.2527760 609.743    0
#> 4 4e-04 0.2530985 608.775    0
#> 5 5e-04 0.2526145 610.388    0
#> 6 6e-04 0.2534210 610.066    0

Assemble via as_muscle_stim()

It is absolutely crucial that the columns be named “Time”, “Position”, “Force”, and “Stim” (all case-sensitive). Otherwise, as_muscle_stim() will not interpret data correctly.

At minimum, this data.frame, the type of experiment, and the frequency at which data were recorded (sample_frequency, as a numeric) are necessary for as_muscle_stim().

## Put it together
my_muscle_stim <- as_muscle_stim(x = my_data,
                                 type = "workloop",
                                 sample_frequency = 10000)

## Data are stored in columns and basically behave as data.frames
head(my_muscle_stim)
#> # Workloop Data: 3 channels recorded over 6e-04s
#> File ID: NA
#> 
#>    Time  Position   Force Stim
#> 1 0e+00 0.2519695 609.743    0
#> 2 1e-04 0.2530985 611.033    0
#> 3 2e-04 0.2527760 609.743    0
#> 4 3e-04 0.2530985 608.775    0
#> 5 4e-04 0.2526145 610.388    0
#> 6 5e-04 0.2534210 610.066    0

ggplot(my_muscle_stim, aes(x = Time, y = Position)) +
  geom_line() + 
  labs(y = "Position (mm)", x = "Time (secs)") +
  ggtitle("Time course of length change") +
  theme_bw()

Attributes

By default, a couple attributes are auto-filled based on the available information, but it’s pretty bare-bones

str(attributes(my_muscle_stim))
#> List of 22
#>  $ names             : chr [1:4] "Time" "Position" "Force" "Stim"
#>  $ row.names         : int [1:3244] 1 2 3 4 5 6 7 8 9 10 ...
#>  $ class             : chr [1:3] "workloop" "muscle_stim" "data.frame"
#>  $ units             : logi NA
#>  $ header            : logi NA
#>  $ units_table       : logi NA
#>  $ protocol_table    : logi NA
#>  $ stim_table        : logi NA
#>  $ stimulus_pulses   : logi NA
#>  $ stimulus_offset   : logi NA
#>  $ stimulus_width    : logi NA
#>  $ gear_ratio        : num 1
#>  $ file_id           : logi NA
#>  $ mtime             : logi NA
#>  $ stimulus_frequency: logi NA
#>  $ cycle_frequency   : logi NA
#>  $ total_cycles      : logi NA
#>  $ cycle_def         : logi NA
#>  $ amplitude         : logi NA
#>  $ phase             : logi NA
#>  $ position_inverted : logi FALSE
#>  $ sample_frequency  : num 10000

We highly encourage you to add in as many of these details as possible by passing them in via the ... argument. For example:

## This time, add the file's name via "file_id"
my_muscle_stim <- as_muscle_stim(x = my_data,
                                 type = "workloop",
                                 sample_frequency = 10000,
                                 file_id = "workloop123")

## For simplicity, we'll just target the file_id attribute directly instead of 
## printing all attributes again
attr(my_muscle_stim, "file_id")
#> [1] "workloop123"

Possible attributes

Here is a list of all possible attributes that can be filled.

names(attributes(workloop_dat))
#>  [1] "names"              "row.names"          "stimulus_frequency"
#>  [4] "cycle_frequency"    "total_cycles"       "cycle_def"         
#>  [7] "amplitude"          "phase"              "position_inverted" 
#> [10] "units"              "sample_frequency"   "header"            
#> [13] "units_table"        "protocol_table"     "stim_table"        
#> [16] "stimulus_pulses"    "stimulus_offset"    "stimulus_width"    
#> [19] "gear_ratio"         "file_id"            "mtime"             
#> [22] "class"

To see how each should be formatted, (e.g. which ones take numeric values vs. character vectors…etc)

str(attributes(workloop_dat))
#> List of 22
#>  $ names             : chr [1:4] "Time" "Position" "Force" "Stim"
#>  $ row.names         : int [1:3244] 1 2 3 4 5 6 7 8 9 10 ...
#>  $ stimulus_frequency: int 300
#>  $ cycle_frequency   : int 28
#>  $ total_cycles      : int 6
#>  $ cycle_def         : chr "lo"
#>  $ amplitude         : num 1.57
#>  $ phase             : num -24.9
#>  $ position_inverted : logi FALSE
#>  $ units             : chr [1:4] "s" "mm" "mN" "TTL"
#>  $ sample_frequency  : num 10000
#>  $ header            : chr [1:4] "Sample Frequency (Hz): 10000" "Reference Area: NaN sq. mm" "Reference Force: NaN mN" "Reference Length: NaN mm"
#>  $ units_table       :'data.frame':  10 obs. of  5 variables:
#>   ..$ Channel: chr [1:10] "AI0" "AI1" "AI2" "AI3" ...
#>   ..$ Units  : chr [1:10] "mm" "mN" "TTL" "" ...
#>   ..$ Scale  : num [1:10] 1 500 0.2 0 0 0 0 0 1 500
#>   ..$ Offset : num [1:10] 0 0 0 0 0 0 0 0 0 0
#>   ..$ TADs   : num [1:10] 0 0 0 0 0 0 0 0 0 0
#>  $ protocol_table    :'data.frame':  4 obs. of  5 variables:
#>   ..$ Wait.s     : num [1:4] 0 0.01 0 0.1
#>   ..$ Then.action: chr [1:4] "Stimulus-Train" "Sine Wave" "Stimulus-Train" "Stop"
#>   ..$ On.port    : chr [1:4] "Stimulator" "Length Out" "Stimulator" ""
#>   ..$ Units      : chr [1:4] ".012, 300, 0.2, 4, 28" "28,3.15,6" "0,0,0,0,0" ""
#>   ..$ Parameters : logi [1:4] NA NA NA NA
#>  $ stim_table        :'data.frame':  2 obs. of  5 variables:
#>   ..$ offset         : num [1:2] 0.012 0
#>   ..$ frequency      : int [1:2] 300 0
#>   ..$ width          : num [1:2] 0.2 0
#>   ..$ pulses         : int [1:2] 4 0
#>   ..$ cycle_frequency: int [1:2] 28 0
#>  $ stimulus_pulses   : int 4
#>  $ stimulus_offset   : num 0.012
#>  $ stimulus_width    : num 0.2
#>  $ gear_ratio        : num 2
#>  $ file_id           : chr "workloop.ddf"
#>  $ mtime             : POSIXct[1:1], format: "2021-05-04 18:12:35"
#>  $ class             : chr [1:3] "workloop" "muscle_stim" "data.frame"

Thanks for reading!

Please feel free to contact either Vikram or Shree with suggestions or code development requests. We are especially interested in expanding our data import functions to accommodate file types other than .ddf in future versions of workloopR.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.