The hardware and bandwidth for this mirror is donated by METANET, the Webhosting and Full Service-Cloud Provider.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]metanet.ch.
The exam-n class – release notes
- 1.1.4, 2016 December 19
- Documentation: add notes about use of pdfpages.
- Added
[largefont]
option.
Note:
option [hugefont]
has replaced [bigfont]
;
the latter is now deprecated, and may be removed in v1.2.
- Use of the
\part
macro is now supported within
solutions (it produced the wrong numbers before), and there is a new
\StylePartNumber
customisation macro.
- 1.1.3
- Version 1.1.3 was never released
- 1.1.2, 2015 November 26
- Handled trailing floats at end of document (generated by packages
such as
rotating
.
\label
within question environment now refers to the
question number.
- Work around a problem when a paragraph starts with
{\bf ...}
rather than (post-1995) \textbf{...}
.
\begin{questiondata}
now starts a new paragraph.
- Some documentation adjustments.
- 1.1.1, 2014 November 27
- Adjust
\partmarks*
behaviour; now behaves differently
within display maths (addresses
issue 1).
- Various documentation and release fixes.
- 1.1, 2014 May 3
- Converted to a generic class,
exam-n
, ready for wider
distribution.
Available on bitbucket
and at CTAN.
- 1.0.16, 2014 February 28
- Option mtpro2 now switches to times (this fixes a pre-existing bug
exposed by the [sansserif] option).
- The [bigfont] option now works (this fixes a pre-existing bug, to
do with
\subsections
, which was exposed by the addition
of the [bigfont] option).
- Added the [bigfont] option
- Fixed 'shouts' warning at start (again)
- Forbid *section commands inside questions (and don't freak out)
- Rename
\questiontrailer
to \questionpreamble
(more logical)
- Fixed mcq warnings, and 'question continued' errors.
- Renamed
\multiplechoicequestions
to more logical
\multiplechoiceanswers
- Various (further) spacing changes
- Added
\subsection
- Release includes
1.0.16b1 (2014 January 20);
1.0.16b2 (20 January);
1.0.16b3 (22 January);
1.0.16b4 (14 February).
- 1.0.15, 2014 January 19
- Fixed mcq and showsolutions, to suppress incorrect warning of missing answers.
- 1.0.14, 2014 January 10
- pdfpages content now appears in draft mode.
- The
[draft]
option now implies [showsolutions] (so if
you want to suppress the solutions in this mode, you must now follow
[draft]
with [noshowsolutions]
).
- Showing missing information: shouts and missing exam date/time are
now highlighted.
- Fixed bug where excess
\QuestionNumberChecksOff
caused question numbers to disappear.
- Remove indent at start of question.
- 1.0.13, 2013 December 4
- Added a
[sansserif]
class option.
- Improved spacing and linebreaking; there are now fewer bad page-breaks.
- Added the
{mcq}
environment.
- Changed the distribution licence from GPL to LPPL.
- 1.0.12, 2013 November 11
- Adjustments to banner text and base rubric (consulting with Morag Casey).
- Added notes about
\includepdf
in notes for authors
.
- Adjustments to the distributed example files.
- 1.0.11, 2013 July 18
- Adjustments to question data: k_B, etc, should have roman subscripts.
- 1.0.10, 2013 June 27
- Minor documentation and distribution fixes
- 1.0.9, 2013 March 22
- Remove leftover debugging code (garhhh)
- 1.0.8, 2013 March 14
- Add the
mono
and colour
options.
- 1.0.7, 2013 March 14
- pdfpages is now disabled only in solutions
- Minor layout changes (exam title adjusts size for long
titles)
- 1.0.6, 2013 March 13
- Avoid tables and figures in solutions incrementing the float counter.
- Layout changes; adjustment to default base rubric; A345 rubric change
- Some documentation changes
- 1.0.4-1, 2013 March 8
- This is a bugfix release: it's a re-release of now-deprecated
1.0.5 minus a breaking change.
- Add
{table}
support, paralleling existing
{figure}
support (ie tables don't float, but captions
work as expected).
- Blank lines after a
\begin{question}
no longer
result in extra space.
- Adjust spacing and layout of front page (again); various other
cosmetic changes.
- A document identifier appears at the bottom of each page,
corroborating the exam the page is for (to avoid photocopier collation
accidents), and giving a numeric identifier which increases with time
(allowing you to identify which of two printouts is later).
- 1.0.4, 2013 March 6
- Adjust base rubric; assorted distribution and detail fixes.
- 1.0.3, 2013 January 25
- Added
[A2]
class option.
- 1.0.2, 2013 January 25
- The `pdfpages' package wasn't working when the `noshowsolutions'
option was present. Fixed, by special-casing, specifically disabling the
\includepdf
command in this case.
- Adjust display of
\partmarks
(no need for extra
space, since \partmarks
is now fully in the margin).
- Adjusting the front-page layout. Again.
- 1.0.1, 2013 January 18
{figure}
now works, because it's explicitly
supported ({figure}
inside solutions could cause problems
before). The contents don't float.
- Layout adjustments.
- Graphics now appear in draft mode.
- 1.0, 2012 December 11
- This is the nominal version 1.0 release, and will be used for the
2012-13 Honours Astronomy exams (it might get further tweaks along the
way, but we believe this is a complete distribution set).
- More adjustments to notes-for-authors, now showing example LaTeX results.
- Addition of template-question.tex
- Adjustments to base rubric.
- 1.0b5, 2012 December 3
- Fine formatting adjustments: occasional
\nobreak
and
rationalisation of \maketitle
.
- Improvements to notes-for-authors.
- 1.0b4, 2012 November 30
- Improve generation of PDF metadata.
- Add macro
\shout
, for highlighted `FIXME' comments.
- Add showmarktotals option.
- Permit
\partmarks
in solutions, without it adding to
the marks added up for the question (at the same time, forbid having a
solution within a solution).
- Various formatting adjustments.
- 1.0b3, 2012 November 8
- Add [A345] option.
- Make compose/draft material appear in red.
- Some packaging changes and bugfixes.
- 1.0b2, 2012 November 6
- Mild formatting adjustments.
- 1.0rc1, 2012 November 2
- Significant rewrite of formatting, producing a consensus
AandA/PhysHons style, and renaming some confusingly named
commands.
- Consequently, the AandA.clo and PhysHons.clo options have
disappeared.
- The
\constantssheet
macro has appeared, and setting
this is now the principal function of per-class .clo
files.
See the new A1.clo
and modified P2.clo
option files.
- 0.17.1, 2012 September 21
- Fix packaging infelicity
- 0.17, 2012 September 21
- Rework
solutions
environment to make it a little more robust.
- Add
\MSc
degree shorthand.
- Bugfix: continuation headers now appear if a question starts on page 1.
- Bugfix: fix wrong syntax in draft+showsolutions mode -- now works again
- 0.16, 2012 July 26
- Renamed the [showmarks] option to more rational [perquestionmarks]
(because the option doesn't control whether per-question marks are
displayed, but whether they're tracked at all). Slightly
improved the documentation of this at the same time.
- Added
\lambdabar
macro
- Fix long-standing problem with continuation lines -- these should now be robust.
- 0.15, 2011 November 23
- Avoid conflict with
ifpdf
package.
Now depends on ifpdf
.
- 0.14, 2010 August 6
- Fixed the problem where the question-continuation marks would be
messed up by the presence of floats.
- Added P2.clo; adjust 'showing solutions' banner
to avoid collision with other headers (thanks to Morag Casey for the .clo
file and the report).
- Changed the name of the class to 'guexam', from potentially confusing 'exam'.
Support guexam.config for forcing options (for example).
- 0.13-1, 2008 November 21
- Make the gulogo style optional, so that question authors don't
have to download and install that before they can draft a question.
Also adjust the logo size.
- 0.13, 2008 November 11
- Add university logo, and slightly rearrange the header.
Add
{questiondata}
environment.
- 0.12-2, 2008 April 14
- ...keep on truckin'. Further changes to the
\partmarks*
spacing code, still largely unprincipled, but
looking closer to what's required.
- 0.12-1, 2008 April 3
- ...and again. This time, I think I actually see what the problem
was. Macro
\partmarks
now forces a new paragraph (it was
documented to be usable at the end of a paragraph, so this is again
forced, and the documentation made more explicit), this makes what I
thought was the solution actually work. Which is nice. Redefined
enumerate
and itemize
environments, to
improve spacing somewhat.
- 0.12, 2008 April 3
- Further adjustments to
\partmarks
: again, it should
be more consistent without necessarily being more principled, alas.
- 0.11, 2008 March 30
- Minor fixes: Adjust display of partmarks -- should now be more
consistent; option [showsolutions] no longer defaults
[{no,}pageperquestion]; add macro
\e
to format roman
exponential.
- 0.10, 2008 January 17
- Fix
\vec
when it appears in sub- or superscript
position. Add \paperident
command.
- 0.9, 2007 December 10
- Various formatting changes. Added optional argument to
\includequestion
overriding question number.
- 0.8, 2007 November 25
- You can now use
\usepackage
within
[compose]
mode.
- 0.7, 2007 November 20
- Make changes to the display of the 'University of Glasgow' banner
at the top: resolves some font problems. Other minor layout tweaks.
- 0.6, 2007 November 18
- Fixed bold maths problems:
\vec
now works with greek
letters, too. Support MTpro2 (mathtime maths fonts) with the new
[mtpro2]
class option. The {solution}
environment can appear multiple times within a question. Question
numbers now appear correctly in 'final' mode.
- 0.5, 2007 October 30
- Fix collision with LaTeX internal: a
\comment
at the
start of a {question}
now works.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.